|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Replacement pulley wheels for Shimano 600 8 speed
I've got an older 8 speed shimano 600 derailer and need to replace
the pulley wheels. I'm having a hard time finding a pair. Can anyone recommend a source? Thank you, Bob |
Ads |
#2
|
|||
|
|||
Replacement pulley wheels for Shimano 600 8 speed
On Sep 28, 8:48*am, Bob wrote:
I've got an older 8 speed shimano 600 derailer and need to replace the pulley wheels. I'm having a hard time finding a pair. Can anyone recommend a source? Thank you, Bob I believe the TACX stainless ball bearing ones should fit (they come with a bunch of different bushings for different applications) and I picked up a pair at my LBS for about $20 which seems to be the going price online as well. I used them in a 105 9-speed rear der. so I can't exactly answer your question, but I think they should work for you. nate |
#4
|
|||
|
|||
Replacement pulley wheels for Shimano 600 8 speed
In article 56dc2086-1e5d-4ae0-b915-
, says... I've got an older 8 speed shimano 600 derailer and need to replace the pulley wheels. I'm having a hard time finding a pair. Can anyone recommend a source? Thank you, Bob I may have erred and you need the Tacx T4000 for the older Shimano 8sp, check the tacx site out. |
#5
|
|||
|
|||
Replacement pulley wheels for Shimano 600 8 speed
Thanks very much for the info. I'll give it a try.
Bob |
#6
|
|||
|
|||
Replacement pulley wheels for Shimano 600 8 speed
On Sep 28, 6:48*am, Bob wrote:
I've got an older 8 speed shimano 600 derailer and need to replace the pulley wheels. I'm having a hard time finding a pair. Can anyone recommend a source? Thank you, Bob I'm going to say it anyway. Have a decent bike shop around? They should have them, I do, many others on the NG do also(Andy Muzi, Mike J, others). |
#7
|
|||
|
|||
Replacement pulley wheels for Shimano 600 8 speed
On 09/29/2009 05:22 AM, P. Chisholm wrote:
On Sep 28, 6:48�am, wrote: I've got an older 8 speed shimano 600 derailer and need to replace the pulley wheels. I'm having a hard time finding a pair. Can anyone recommend a source? Thank you, Bob I'm going to say it anyway. Have a decent bike shop around? They should have them, I do, many others on the NG do also(Andy Muzi, Mike J, others). indeed - get shimano oem wheels - they have the required side-float in the top one. aftermarket wheels have ball bearings, not sliding journals, so don't accommodate this function. |
#8
|
|||
|
|||
Replacement pulley wheels for Shimano 600 8 speed
On 2009-09-29, jim beam wrote:
On 09/29/2009 05:22 AM, P. Chisholm wrote: On Sep 28, 6:48�am, wrote: I've got an older 8 speed shimano 600 derailer and need to replace the pulley wheels. I'm having a hard time finding a pair. Can anyone recommend a source? Thank you, Bob I'm going to say it anyway. Have a decent bike shop around? They should have them, I do, many others on the NG do also(Andy Muzi, Mike J, others). indeed - get shimano oem wheels - they have the required side-float in the top one. aftermarket wheels have ball bearings, not sliding journals, so don't accommodate this function. Speaking of sliding journals in pulley wheels, which part is supposed to slide? Is it all supposed to be spin around the bolt itself, or is the nylon wheel meant to slide around the sleeve that the bolt goes through? Or either/both/nobody cares? |
#9
|
|||
|
|||
Replacement pulley wheels for Shimano 600 8 speed
On 29 Sep, 13:54, jim beam wrote:
On 09/29/2009 05:22 AM, P. Chisholm wrote: On Sep 28, 6:48 am, *wrote: I've got an older 8 speed shimano 600 derailer and need to replace the pulley wheels. I'm having a hard time finding a pair. Can anyone recommend a source? Thank you, Bob I'm going to say it anyway. Have a decent bike shop around? They should have them, I do, many others on the NG do also(Andy Muzi, Mike J, others). indeed - get shimano oem wheels - they have the required side-float in the top one. *aftermarket wheels have ball bearings, not sliding journals, so don't accommodate this function. a sloppy guide pulley is only required for a sloppy derailler and cable installation. |
#10
|
|||
|
|||
Replacement pulley wheels for Shimano 600 8 speed
On 09/29/2009 07:14 AM, Ben C wrote:
On 2009-09-29, jim wrote: On 09/29/2009 05:22 AM, P. Chisholm wrote: On Sep 28, 6:48�am, wrote: I've got an older 8 speed shimano 600 derailer and need to replace the pulley wheels. I'm having a hard time finding a pair. Can anyone recommend a source? Thank you, Bob I'm going to say it anyway. Have a decent bike shop around? They should have them, I do, many others on the NG do also(Andy Muzi, Mike J, others). indeed - get shimano oem wheels - they have the required side-float in the top one. aftermarket wheels have ball bearings, not sliding journals, so don't accommodate this function. Speaking of sliding journals in pulley wheels, which part is supposed to slide? Is it all supposed to be spin around the bolt itself, or is the nylon wheel meant to slide around the sleeve that the bolt goes through? Or either/both/nobody cares? there's a sleeve fixed inside the wheel which can slide and rotate about the sleeve that goes outside the bolt. high end modern shimano uses ceramic journals which are virtually wear and grit proof. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Replacement pulley(s)for Shimano Derailleurs? | rs | Techniques | 3 | October 18th 05 02:17 AM |
FS: Shimano 105 Take Off 9 Speed Groups w/ Wheels | MrChet | Marketplace | 0 | September 22nd 05 07:13 PM |
7 Speed Shimano Wheels | Paul Cassel | Techniques | 11 | August 14th 05 02:28 AM |
derailleur pulley wheels boat grease | [email protected] | Techniques | 2 | March 10th 05 10:22 PM |
Wanted......G-Pulley Jockey Wheels... | sea k | Marketplace | 1 | July 22nd 03 01:37 PM |