#21
|
|||
|
|||
hubs!
Joe said "At least with a KH/onza/qu-ax crankset you can get some BMX cranks that fit it as well as the cranks it comes with. " Can you use any BMX cranks though? Are the splines on the KH, QU-AX and Onza made to one standard such as ISIS? I thought they all had a different number of splines. Simon -- Cumbria_Muni&Trials_Club - The home of Mountain Uni in Cumbria Welcome to Cumbria - take only pictures, leave only one wheel track CumbriaMuni (dot) com ------------------------------------------------------------------------ Cumbria_Muni&Trials_Club's Profile: http://www.unicyclist.com/profile/3758 View this thread: http://www.unicyclist.com/thread/27372 |
Ads |
#22
|
|||
|
|||
hubs!
Cumbria_Muni&Trials_Club wrote: *Joe said "At least with a KH/onza/qu-ax crankset you can get some BMX cranks that fit it as well as the cranks it comes with. " Can you use any BMX cranks though? Are the splines on the KH, QU-AX and Onza made to one standard such as ISIS? I thought they all had a different number of splines. Simon * They're not standard, but other bmx cranks with the same number of splines will work. KH hubs use 8 spline bmx cranks, there's a few makes, although I think the only very short ones are expensive DM Engineering custom ones (dunno how much they are in the UK), QU-AX are I think 10 spline, meaning different bmx cranks will work, and Onza are 40 spline, meaning onza bmx cranks will work. With all these hubs, you've got at least 140/145 and 170 easily available, rather than having to use custom cut down cranks which are presumably pretty expensive if you want new ones. Obviously the profile situation of being able to buy lots of different lengths as stock cranks would be best though. Joe -- joemarshall - dumb blonde ------------------------------------------------------------------------ joemarshall's Profile: http://www.unicyclist.com/profile/1545 View this thread: http://www.unicyclist.com/thread/27372 |
#23
|
|||
|
|||
hubs!
Joe or anyone else, I don't mean to boil the cabbages more than once if others have already mentioned this but how many splines have profile cranks and how many splines do the ISIS satandard ones have? Simon -- Cumbria_Muni&Trials_Club - The home of Mountain Uni in Cumbria Welcome to Cumbria - take only pictures, leave only one wheel track CumbriaMuni (dot) com ------------------------------------------------------------------------ Cumbria_Muni&Trials_Club's Profile: http://www.unicyclist.com/profile/3758 View this thread: http://www.unicyclist.com/thread/27372 |
#24
|
|||
|
|||
hubs!
Cumbria_Muni&Trials_Club wrote: *Joe or anyone else, I don't mean to boil the cabbages more than once if others have already mentioned this but how many splines have profile cranks and how many splines do the ISIS satandard ones have? Simon * Some of that cabbage was boiled in another thread: '\"Profile hubs\"' (http://tinyurl.com/llfc) (Profiles have 48) Here is a page with some good info on ISIS and others: 'Park tool page' (http://tinyurl.com/llfd) Scott -- S_Wallis - MUni motivated "I am always doing that which I can not do, in order that I may learn how to do it." Pablo Picasso ------------------------------------------------------------------------ S_Wallis's Profile: http://www.unicyclist.com/profile/1520 View this thread: http://www.unicyclist.com/thread/27372 |
#25
|
|||
|
|||
hubs!
evilewan wrote: *"sem xl" frames are everywhere with diferent names on them, does sem actualy get a cut on each one? or does some factory in taiwan have the tooling and accept orders from anyone? * Correct me if I'm wrong, but I'm pretty sure "Sem XL" is just one of the many names attached to frames from "Factory X" in Taiwan. I'm pretty sure that frame design existed before Semcycle adopted it for its XL line. It's a good design, so many others have ordered and used it as well. But some of the changes and improvements to those frames over the years may have come from Semcycle. The long neck frame, for example. Their deal with the manufacturer could be that they only get made for Semcycle, or it may be that the manufacturer gives them a lower price in exchange for letting them offer that frame to other customers as well. *keeping designs secret realy befifits no-body in a market like this. if something is available for everybody to re-brand then the price goes down. if the price goes down then the suppliers can sell more units.* This is true, but I accept the designer's right to decide what to do with his design. If, when a supplier is found, and the designer can make a deal for a small royalty on each frame made, that should be his perogative. But as we know, in our itty bitty market, even sharing a design in a way such as this will not add up to much unless unicycling becomes a more mainstream sport. Someone else asked what's wrong with Profiles. Though they seem to hold up great, the answer is obvious: the noise! My DMs never made a sound. -- johnfoss - Now riding to work John Foss the Uni-Cyclone www.unicycling.com ________________ "Where's my kids?" -- Amy Drummond "Where's my unicycle?" -- Andy Cotter spoken one right after the other, mostly to themselves, at NAUCC 2003 ------------------------------------------------------------------------ johnfoss's Profile: http://www.unicyclist.com/profile/832 View this thread: http://www.unicyclist.com/thread/27372 |
#26
|
|||
|
|||
hubs!
"factory x", thats funny. it sounds all super hero. i`ve seen long neck xl frames from others apart from sem. including when i was at seigmono in germany. profiles are pertty good, but 1 year and a million drops later mine are begining to become loose. i realy am glad i`ve got that warranty. as far as improvements to the profile reducing the spline count and adding an extra keyway. the axle is probaby overspecified so it could be fractionaly thinner to reduce weight. isn`t that what the new onza hubs are like though? -- evilewan - death or glory -- evilewan. see the rec.sport.unicycling maintainance FAQ @ http://evilewan.unicyclist.com/ ------------------------------------------------------------------------ evilewan's Profile: http://www.unicyclist.com/profile/1047 View this thread: http://www.unicyclist.com/thread/27372 |
#27
|
|||
|
|||
hubs!
This just in... http://muniac.com/store/hub_ad.jpg -- merrill - Confinement Loaf Smart Bomb + Dumb President = Weapon of Mass Destruction ------------------------------------------------------------------------ merrill's Profile: http://www.unicyclist.com/profile/818 View this thread: http://www.unicyclist.com/thread/27372 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS/T Campagnolo Campy 9/10v crankset, hubs, and wheels | Jeff S. | Marketplace | 0 | September 1st 03 04:36 AM |
FS/T: Campy Campagnolo 9/10v crankset, hubs, and wheels | Jeff S. | Marketplace | 0 | July 4th 03 03:29 AM |