|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Cable routing on mountain bike.
"John B." wrote in message ... On Thu, 6 Oct 2016 18:19:50 +0100, "Benderthe.evilrobot" wrote: "John B." wrote in message . .. On Wed, 5 Oct 2016 21:30:50 +0100, "Benderthe.evilrobot" wrote: Rebuilding a pretty much stripped frame, it looks fairly simple, but so far I've only got as far as buying the cable. Some guidance would be handy before I start cutting.......... An email to the manufacturer went unanswered and Sheldon Brown doesn't get that specific on cable routing. Google wasn't much help either. Its the cable layout that runs in a plastic runner under the bottom bracket. The bike I'm using has all its cable runs along the top tube. Thanks for any help. If the cable stops are all on the top of the top-tube than, usually, you just use the existing cable and the bare cable runs between the cable stops. I guess your reading comprehension hasn't improved - I stated that it has a plastic cable guide under the bottom bracket. Also I stated that the bike I'm using has cables along the top tube - most people would understand that I can't just copy that on the frame I'm building. You say "The bike I'm using has all its cable runs along the top tube." so I discussed possible top tube configurations. Now it seems to have changed to "under the bottom bracket" which is a bit different. The only thing that changed is your perception of what I stated. I typed the words in - I can't make you read them.................... |
Ads |
#12
|
|||
|
|||
Cable routing on mountain bike.
"John B." wrote in message ... On Thu, 6 Oct 2016 19:48:39 -0700 (PDT), Sir Ridesalot wrote: On Thursday, October 6, 2016 at 8:17:00 PM UTC-4, John B. wrote: On Thu, 6 Oct 2016 18:19:50 +0100, "Benderthe.evilrobot" wrote: "John B." wrote in message .. . On Wed, 5 Oct 2016 21:30:50 +0100, "Benderthe.evilrobot" wrote: Rebuilding a pretty much stripped frame, it looks fairly simple, but so far I've only got as far as buying the cable. Some guidance would be handy before I start cutting.......... An email to the manufacturer went unanswered and Sheldon Brown doesn't get that specific on cable routing. Google wasn't much help either. Its the cable layout that runs in a plastic runner under the bottom bracket. The bike I'm using has all its cable runs along the top tube. Thanks for any help. If the cable stops are all on the top of the top-tube than, usually, you just use the existing cable and the bare cable runs between the cable stops. I guess your reading comprehension hasn't improved - I stated that it has a plastic cable guide under the bottom bracket. Also I stated that the bike I'm using has cables along the top tube - most people would understand that I can't just copy that on the frame I'm building. You say "The bike I'm using has all its cable runs along the top tube." so I discussed possible top tube configurations. Now it seems to have changed to "under the bottom bracket" which is a bit different. -- cheers, John B. Methinks he is currently using a bicvycle with the cables along the top tube. Methinks the bike he wants to put the cables on has an under the bottom bracket cable guide and thus needs cable run there. Why he mentioned the top cable guide bike is beyond me as it certainly confused the issue. And there was me KF'd someone who actually bothers to read what I wrote........................................... |
#13
|
|||
|
|||
Cable routing on mountain bike.
"DATAKOLL MARINE RESEARCH" wrote in message ... uh thinking is the frame is older n a new guide .....costing peanuts.....is from a generation better plastic ..... as for the top tube ? no reason producing developmental situations when the wires are just as good where the engineer placed them. my reading ability is good. speaking with hardheads isnot in odor I may be a hardhead - but you're barely intelligible in any language. |
#14
|
|||
|
|||
Cable routing on mountain bike.
"John B." wrote in message ... On Thu, 6 Oct 2016 19:48:39 -0700 (PDT), Sir Ridesalot wrote: On Thursday, October 6, 2016 at 8:17:00 PM UTC-4, John B. wrote: On Thu, 6 Oct 2016 18:19:50 +0100, "Benderthe.evilrobot" wrote: "John B." wrote in message .. . On Wed, 5 Oct 2016 21:30:50 +0100, "Benderthe.evilrobot" wrote: Rebuilding a pretty much stripped frame, it looks fairly simple, but so far I've only got as far as buying the cable. Some guidance would be handy before I start cutting.......... An email to the manufacturer went unanswered and Sheldon Brown doesn't get that specific on cable routing. Google wasn't much help either. Its the cable layout that runs in a plastic runner under the bottom bracket. The bike I'm using has all its cable runs along the top tube. Thanks for any help. If the cable stops are all on the top of the top-tube than, usually, you just use the existing cable and the bare cable runs between the cable stops. I guess your reading comprehension hasn't improved - I stated that it has a plastic cable guide under the bottom bracket. Also I stated that the bike I'm using has cables along the top tube - most people would understand that I can't just copy that on the frame I'm building. You say "The bike I'm using has all its cable runs along the top tube." so I discussed possible top tube configurations. Now it seems to have changed to "under the bottom bracket" which is a bit different. -- cheers, John B. Methinks he is currently using a bicvycle with the cables along the top tube. Methinks the bike he wants to put the cables on has an under the bottom bracket cable guide and thus needs cable run there. Why he mentioned the top cable guide bike is beyond me as it certainly confused the issue. It points out that I can't copy the layout from the complete bike. |
#15
|
|||
|
|||
Cable routing on mountain bike.
an electronic rear wheel brake control ...poss a brain implant ?
Hello Helooo rear brake brake cumin rear brake weeez goin under de Bus ..... |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cable routing on a time trial bike | Jeff[_9_] | Techniques | 3 | October 20th 08 06:33 PM |
Cable routing | Larry[_2_] | Techniques | 5 | June 12th 07 02:42 AM |
MTB: downtube cable routing | David Bonnell | Techniques | 0 | May 23rd 07 10:40 PM |
cable routing, rollamajig? | futrino | Techniques | 3 | May 5th 07 12:06 AM |
Cable routing on FSA k wings without internal routing. | chad | Techniques | 3 | June 13th 06 12:03 AM |