|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Washed bike with garden hose jet - disaster?
Hello All,
I am new to mountain biking (and I am new to having to take care of my bike in general). After three rides in gritty granitic sand-mud, I decided it was high time to wash the bike. I pulled out the garden hose, choose the "jet" setting (it's one of those hoses that has a spout that can produce mist, shower, etc), and blasted the bike until the mud was off (I then cleaned the chain with a toothbrush and more care, and re-greased it). Now I read in the newsgroup that it is a BAD idea to blast the bike with a jet of water, as the water gets into the bearings. So my question is: now what? Is there anything special I should do? Should I bring the bike to a bike shop to be checked for water? As an aside, after the wash, the brakes started SQUEALING madly. I assume that's a good thing: they are so loud that a good part of the energy is surely dissipating into sound, rather than heat, helping keeping the brakes cool. However, I am worried about the effects on wildlife, and I believe riding with earplugs will lessen the enjoyment of the ride. What is the cause of the squealing? I tried to clean the discs (I have disc brakes) and the pads with alcohol, as I have read, but it didn't help... Thanks for your advice, Peter -- rec.bicycles.off-road is moderated by volunteers. To find help solving posting problems, or contact the moderators, please see http://rbor.org/ Please read the charter before posting: http://rbor.org/rbor_charter.txt |
Ads |
#2
|
|||
|
|||
1. you can jetwash your bike, just keep the jet away from the bottom
bracket/ fork seals/ suspension pivots etc. 2. the squealing could be caused by water trapped between the pad and the piston "plampione" wrote in message ups.com... Hello All, I am new to mountain biking (and I am new to having to take care of my bike in general). After three rides in gritty granitic sand-mud, I decided it was high time to wash the bike. I pulled out the garden hose, choose the "jet" setting (it's one of those hoses that has a spout that can produce mist, shower, etc), and blasted the bike until the mud was off (I then cleaned the chain with a toothbrush and more care, and re-greased it). Now I read in the newsgroup that it is a BAD idea to blast the bike with a jet of water, as the water gets into the bearings. So my question is: now what? Is there anything special I should do? Should I bring the bike to a bike shop to be checked for water? As an aside, after the wash, the brakes started SQUEALING madly. I assume that's a good thing: they are so loud that a good part of the energy is surely dissipating into sound, rather than heat, helping keeping the brakes cool. However, I am worried about the effects on wildlife, and I believe riding with earplugs will lessen the enjoyment of the ride. What is the cause of the squealing? I tried to clean the discs (I have disc brakes) and the pads with alcohol, as I have read, but it didn't help... Thanks for your advice, Peter -- rec.bicycles.off-road is moderated by volunteers. To find help solving posting problems, or contact the moderators, please see http://rbor.org/ Please read the charter before posting: http://rbor.org/rbor_charter.txt -- rec.bicycles.off-road is moderated by volunteers. To find help solving posting problems, or contact the moderators, please see http://rbor.org/ Please read the charter before posting: http://rbor.org/rbor_charter.txt |
#3
|
|||
|
|||
I would take the bike to a shop for a good once over. I invested in a
bike stand, and also found a Pedro's bike wash kit, that came with a pale, sponge, lubricant for the chain, and a product called "Bike Lust" which you can spray on the frame after washing and drying it. It makes the frame shine like new, and also helps resist mud, or at the very least, helps the mud come off much easier. I just throw the bike in the stand and wash with the sponge. -- rec.bicycles.off-road is moderated by volunteers. To find help solving posting problems, or contact the moderators, please see http://rbor.org/ Please read the charter before posting: http://rbor.org/rbor_charter.txt |
#4
|
|||
|
|||
Mian wrote: 1. you can jetwash your bike, just keep the jet away from the bottom bracket/ fork seals/ suspension pivots etc. 2. the squealing could be caused by water trapped between the pad and the piston "plampione" wrote in message ups.com... Hello All, I am new to mountain biking (and I am new to having to take care of my bike in general). After three rides in gritty granitic sand-mud, I decided it was high time to wash the bike. I pulled out the garden hose, choose the "jet" setting (it's one of those hoses that has a spout that can produce mist, shower, etc), and blasted the bike until the mud was off (I then cleaned the chain with a toothbrush and more care, and re-greased it). Now I read in the newsgroup that it is a BAD idea to blast the bike with a jet of water, as the water gets into the bearings. So my question is: now what? Is there anything special I should do? Should I bring the bike to a bike shop to be checked for water? As an aside, after the wash, the brakes started SQUEALING madly. I assume that's a good thing: they are so loud that a good part of the energy is surely dissipating into sound, rather than heat, helping keeping the brakes cool. However, I am worried about the effects on wildlife, and I believe riding with earplugs will lessen the enjoyment of the ride. What is the cause of the squealing? I tried to clean the discs (I have disc brakes) and the pads with alcohol, as I have read, but it didn't help... Thanks for your advice, Peter -- rec.bicycles.off-road is moderated by volunteers. To find help solving posting problems, or contact the moderators, please see http://rbor.org/ Please read the charter before posting: http://rbor.org/rbor_charter.txt -- rec.bicycles.off-road is moderated by volunteers. To find help solving posting problems, or contact the moderators, please see http://rbor.org/ Please read the charter before posting: http://rbor.org/rbor_charter.txt Never-ever use a jet wash or a power washer on your bike . A gentle spray or even straight from the hose is good enough . Ater a few times , your bike cleaning time should cut down to about 10 minutes . Afterwards , dry your bike , especially your chain thouroughly to get the water out of the nooks and crannies ( I'veactually used a blow dryer on my chain ) Lube your chain and wipe off any excess lube. Don't worry too much about your squeling brakes . They'll warn hikers and other bikers of your presence and if you are zoned during the ride , you'll never notice the noise. -- rec.bicycles.off-road is moderated by volunteers. To find help solving posting problems, or contact the moderators, please see http://rbor.org/ Please read the charter before posting: http://rbor.org/rbor_charter.txt |
#5
|
|||
|
|||
Mian wrote: 1. you can jetwash your bike, just keep the jet away from the bottom bracket/ fork seals/ suspension pivots etc. I am not sure I paid attention to keeping the jet away, but also I didn't insist on any particular area, so I guess I should be fine... 2. the squealing could be caused by water trapped between the pad and the piston You are right. After drying overnight, the squealing is completely gone. I will have to be more careful when washing the brakes (I still need to clean them periodically: I bike in a place where the ground is a kind of granitic mud/grit that gouges the discs when it gets inside the brakes). Thanks, Peter -- rec.bicycles.off-road is moderated by volunteers. To find help solving posting problems, or contact the moderators, please see http://rbor.org/ Please read the charter before posting: http://rbor.org/rbor_charter.txt |
#6
|
|||
|
|||
plampione wrote:
Mian wrote: 1. you can jetwash your bike, just keep the jet away from the bottom bracket/ fork seals/ suspension pivots etc. I am not sure I paid attention to keeping the jet away, but also I didn't insist on any particular area, so I guess I should be fine... 2. the squealing could be caused by water trapped between the pad and the piston You are right. After drying overnight, the squealing is completely gone. I will have to be more careful when washing the brakes (I still need to clean them periodically: I bike in a place where the ground is a kind of granitic mud/grit that gouges the discs when it gets inside the brakes). Thanks, Peter Word of warning: Don't obsess about cleaning your bike. IMHO, a hairdryer and toothbrushes, while no doubt very effective once in a while, are verging on the obsessive :-) Make sure you spend more time riding than maintaining it. With luck, you'll wear everything out before the water has time to damage it. -- Westie -- rec.bicycles.off-road is moderated by volunteers. To find help solving posting problems, or contact the moderators, please see http://rbor.org/ Please read the charter before posting: http://rbor.org/rbor_charter.txt |
#7
|
|||
|
|||
"plampione" wrote in message ups.com... Hello All, You will be alright. Don't directly spray the bearings or shifters. They don't weather so well. TJ -- rec.bicycles.off-road is moderated by volunteers. To find help solving posting problems, or contact the moderators, please see http://rbor.org/ Please read the charter before posting: http://rbor.org/rbor_charter.txt |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rec.Bicycles Frequently Asked Questions Posting Part 1/5 | Mike Iglesias | General | 4 | October 29th 04 07:11 AM |
Trips for Kids 13th Annual Bike Swap & Sale | Marilyn Price | General | 0 | June 1st 04 04:52 AM |
Trips for Kids 13th Annual Bike Swap & Sale | Marilyn Price | Recumbent Biking | 0 | June 1st 04 04:49 AM |
Street Bike | Devlin | UK | 44 | March 17th 04 10:28 AM |
my new bike | Marian Rosenberg | General | 5 | October 19th 03 03:00 PM |