|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Chain jumping out of big cog when climbing
Hi all,
I am riding an early 90s steel Serotta frame with a 8 spd Campy group with a 28 tooth big cog and downtube Campy friction shifters. I am having a repeating issue that if I am in the big cog and small chain ring (ie. climbing steep grade), the moment I choose / need to stand up in the pedals, the chain and downtube friction shifter jump to the second cog position. This only happens at the moment I choose to stand. If I remain seated, the chain will remain in the big cog. Somehow, I think this is related to the increase in torque (frame or wheel flex) when standing. I know there is some additional flex happening when I stand because I can hear a faint ticking of the derailer cage on the spokes when I'm standing that I don't hear if I am sitting. I don't know if it matters, but I can recreate the same while the bike is in the repair stand. If the chain is on the big cog and I put a little bit of additional tension on the shift cable coming from the friction lever with my finger, the shift lever will and chain will move to the second cog position. FWIW, I do have the center screw of the friction lever tightened down securely. Any help would be appreciated. Thank you Tim |
Ads |
#2
|
|||
|
|||
Chain jumping out of big cog when climbing
Tim Graichen wrote: Hi all, I am riding an early 90s steel Serotta frame with a 8 spd Campy group with a 28 tooth big cog and downtube Campy friction shifters. I am having a repeating issue that if I am in the big cog and small chain ring (ie. climbing steep grade), the moment I choose / need to stand up in the pedals, the chain and downtube friction shifter jump to the second cog position. This only happens at the moment I choose to stand. If I remain seated, the chain will remain in the big cog. Somehow, I think this is related to the increase in torque (frame or wheel flex) when standing. I know there is some additional flex happening when I stand because I can hear a faint ticking of the derailer cage on the spokes when I'm standing that I don't hear if I am sitting. I don't know if it matters, but I can recreate the same while the bike is in the repair stand. If the chain is on the big cog and I put a little bit of additional tension on the shift cable coming from the friction lever with my finger, the shift lever will and chain will move to the second cog position. FWIW, I do have the center screw of the friction lever tightened down securely. Any help would be appreciated. Thank you Tim Like ERGO levers, these shifters use shift springs just like the ones in the LEFT ERGO lever...maybe one of them is busted or just worn out...may need 2 or 3...went to the 3 spring type about 1995...If 3 spring and ya take them apart, note the direction of the shift disc as it can be assembled 180 degrees wrong..not a problem with the 2 spring version. |
#3
|
|||
|
|||
Chain jumping out of big cog when climbing
Tim Graichen Wrote: Hi all, I am riding an early 90s steel Serotta frame with a 8 spd Campy group with a 28 tooth big cog and downtube Campy friction shifters. I am having a repeating issue that if I am in the big cog and small chain ring (ie. climbing steep grade), the moment I choose / need to stand up in the pedals, the chain and downtube friction shifter jump to the second cog position. This only happens at the moment I choose to stand. If I remain seated, the chain will remain in the big cog. Somehow, I think this is related to the increase in torque (frame or wheel flex) when standing. I know there is some additional flex happening when I stand because I can hear a faint ticking of the derailer cage on the spokes when I'm standing that I don't hear if I am sitting. I don't know if it matters, but I can recreate the same while the bike is in the repair stand. If the chain is on the big cog and I put a little bit of additional tension on the shift cable coming from the friction lever with my finger, the shift lever will and chain will move to the second cog position. FWIW, I do have the center screw of the friction lever tightened down securely. Any help would be appreciated. Thank you Tim From Sheldon Brown's page on this topic: "The usual cause of the problem, believe it or not, is the cable guide that the derailer cable uses to get around the bottom bracket. As you pedal the bike, the frame flexes from side to side. This causes the gear cable to get tighter and looser with every other pedal stroke." More details @ http://sheldonbrown.com/autoshift.html -- daveornee |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
chain jumping off sprockets problem | RB | Techniques | 4 | September 7th 05 08:26 PM |
Chain skipping on large chain ring. | Xyzzy | Techniques | 72 | August 20th 05 03:13 PM |
How can you tell when a chainring is worn? | Charles Smith | Techniques | 40 | January 12th 05 06:56 PM |
Rec.Bicycles Frequently Asked Questions Posting Part 1/5 | Mike Iglesias | General | 4 | October 29th 04 07:11 AM |
newbie bike question - how to tell if bike chain is worn too much | Stephen | Australia | 7 | November 28th 03 01:14 AM |