|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Handlebar rotation
I was looking at photos and you tube films of bicycle racing during the 70's and 80's and it seems that the handle bars were at a very different position then in more recent times. Example: Eddie Marckx time trial 1974, note the downward twist of the handle bars. with the brake levers mounted at almost the center of the "U" bend. https://www.youtube.com/watch?v=vvJSB4gAq3o During a race in 1977 https://www.youtube.com/watch?v=tEAlxGC4Kzg In 1987, still turned down https://www.youtube.com/watch?v=GwU7GXvbjlM In 1990 https://www.youtube.com/watch?v=eojc3AKSWGE in 1994 https://www.youtube.com/watch?v=VtBetiDPPfg In 2001 what may be an intermediate position https://www.youtube.com/watch?v=KAqIVanqbuw In 2007 note how much flatter the bars are with the brake levers fixed almost as an extension of the top flat section of the bars. https://www.youtube.com/watch?v=dbB2O0SmwJw I am wondering. From the revival of bicycle racing in 1946 until the very late 1990's or early 2000's, some 50 years, handle bar position amongst the top riders was very similar with the top of the bars turned down and the bottom "drops" nearly level and then it all changed with the top section of the bars level, or nearly so and the drops angled downward. What happened? Did bicycle geometry suddenly change. Did bicycles get better? Were handlebars suddenly a different shape? -- Cheers, John B. |
#2
|
|||
|
|||
Handlebar rotation
On 2017-07-04 04:05, John B. wrote:
I was looking at photos and you tube films of bicycle racing during the 70's and 80's and it seems that the handle bars were at a very different position then in more recent times. Example: Eddie Marckx time trial 1974, note the downward twist of the handle bars. with the brake levers mounted at almost the center of the "U" bend. https://www.youtube.com/watch?v=vvJSB4gAq3o During a race in 1977 https://www.youtube.com/watch?v=tEAlxGC4Kzg In 1987, still turned down https://www.youtube.com/watch?v=GwU7GXvbjlM In 1990 https://www.youtube.com/watch?v=eojc3AKSWGE in 1994 https://www.youtube.com/watch?v=VtBetiDPPfg In 2001 what may be an intermediate position https://www.youtube.com/watch?v=KAqIVanqbuw In 2007 note how much flatter the bars are with the brake levers fixed almost as an extension of the top flat section of the bars. https://www.youtube.com/watch?v=dbB2O0SmwJw I am wondering. From the revival of bicycle racing in 1946 until the very late 1990's or early 2000's, some 50 years, handle bar position amongst the top riders was very similar with the top of the bars turned down and the bottom "drops" nearly level and then it all changed with the top section of the bars level, or nearly so and the drops angled downward. What happened? Did bicycle geometry suddenly change. Did bicycles get better? Were handlebars suddenly a different shape? Maybe riders complained of wrist pain? My bike from 1982 has the downward drop up top like in your older links. I can't ride it on the hoods for too long because then the wrists hurt from having to twist them too far. Especially on rough roads or dirt/gravel roads. -- Regards, Joerg http://www.analogconsultants.com/ |
#3
|
|||
|
|||
Handlebar rotation
On Tue, 04 Jul 2017 07:52:14 -0700, Joerg
wrote: On 2017-07-04 04:05, John B. wrote: I was looking at photos and you tube films of bicycle racing during the 70's and 80's and it seems that the handle bars were at a very different position then in more recent times. Example: Eddie Marckx time trial 1974, note the downward twist of the handle bars. with the brake levers mounted at almost the center of the "U" bend. https://www.youtube.com/watch?v=vvJSB4gAq3o During a race in 1977 https://www.youtube.com/watch?v=tEAlxGC4Kzg In 1987, still turned down https://www.youtube.com/watch?v=GwU7GXvbjlM In 1990 https://www.youtube.com/watch?v=eojc3AKSWGE in 1994 https://www.youtube.com/watch?v=VtBetiDPPfg In 2001 what may be an intermediate position https://www.youtube.com/watch?v=KAqIVanqbuw In 2007 note how much flatter the bars are with the brake levers fixed almost as an extension of the top flat section of the bars. https://www.youtube.com/watch?v=dbB2O0SmwJw I am wondering. From the revival of bicycle racing in 1946 until the very late 1990's or early 2000's, some 50 years, handle bar position amongst the top riders was very similar with the top of the bars turned down and the bottom "drops" nearly level and then it all changed with the top section of the bars level, or nearly so and the drops angled downward. What happened? Did bicycle geometry suddenly change. Did bicycles get better? Were handlebars suddenly a different shape? Maybe riders complained of wrist pain? My bike from 1982 has the downward drop up top like in your older links. I can't ride it on the hoods for too long because then the wrists hurt from having to twist them too far. Especially on rough roads or dirt/gravel roads. But for almost fifty years, and maybe even longer (I didn't search for pre-WW II photos) top riders used essentially the same style of bars, and relatively suddenly they all seemed to have changed to a much flatter setup. Are bicycle riders somehow mentally deficient that it takes them 50 years to figure out why their wrists are getting sore? -- Cheers, John B. |
#4
|
|||
|
|||
Handlebar rotation
On 2017-07-04 16:33, John B. wrote:
On Tue, 04 Jul 2017 07:52:14 -0700, Joerg wrote: On 2017-07-04 04:05, John B. wrote: I was looking at photos and you tube films of bicycle racing during the 70's and 80's and it seems that the handle bars were at a very different position then in more recent times. Example: Eddie Marckx time trial 1974, note the downward twist of the handle bars. with the brake levers mounted at almost the center of the "U" bend. https://www.youtube.com/watch?v=vvJSB4gAq3o During a race in 1977 https://www.youtube.com/watch?v=tEAlxGC4Kzg In 1987, still turned down https://www.youtube.com/watch?v=GwU7GXvbjlM In 1990 https://www.youtube.com/watch?v=eojc3AKSWGE in 1994 https://www.youtube.com/watch?v=VtBetiDPPfg In 2001 what may be an intermediate position https://www.youtube.com/watch?v=KAqIVanqbuw In 2007 note how much flatter the bars are with the brake levers fixed almost as an extension of the top flat section of the bars. https://www.youtube.com/watch?v=dbB2O0SmwJw I am wondering. From the revival of bicycle racing in 1946 until the very late 1990's or early 2000's, some 50 years, handle bar position amongst the top riders was very similar with the top of the bars turned down and the bottom "drops" nearly level and then it all changed with the top section of the bars level, or nearly so and the drops angled downward. What happened? Did bicycle geometry suddenly change. Did bicycles get better? Were handlebars suddenly a different shape? Maybe riders complained of wrist pain? My bike from 1982 has the downward drop up top like in your older links. I can't ride it on the hoods for too long because then the wrists hurt from having to twist them too far. Especially on rough roads or dirt/gravel roads. But for almost fifty years, and maybe even longer (I didn't search for pre-WW II photos) top riders used essentially the same style of bars, and relatively suddenly they all seemed to have changed to a much flatter setup. It can take a long time to notice adverse health effects. For example, computer mice were not very ergonomical until 10-15 years ago. And they still sell the old style. Probably the industry didn't react until enough people developed hardcore carpal tunnel problems. I switched to a trackball within my first year because I thought this can't be good. Are bicycle riders somehow mentally deficient that it takes them 50 years to figure out why their wrists are getting sore? Who knows :-) It took the bicycle industry a whopping 100 years and they still haven't figured out a good electrical system. Unless you build your own like I do. -- Regards, Joerg http://www.analogconsultants.com/ |
#5
|
|||
|
|||
Handlebar rotation
On Wednesday, July 5, 2017 at 7:08:01 AM UTC-7, Joerg wrote:
It can take a long time to notice adverse health effects. For example, computer mice were not very ergonomical until 10-15 years ago. And they still sell the old style. Probably the industry didn't react until enough people developed hardcore carpal tunnel problems. On B52's the Bomb/Nav system would set the cross-hairs on the target with a "joy stick" which was shaped as the name would imply. You could set the cross hairs on the target and hold them there and the bombing computer would automatically compensate for wind and the effects it was having on the aircraft. When I designed a robotic chemical placement mechanism with a computer interface I designed a joystick into it. The mechanical engineer constructed this as a light weight plastic structure. The end result was that you had to hold the base of the joystick in one hand while setting the cross-hairs on each vial to be moved from point A to point B. This was pretty clumsy so Dr. Michael McCown removed the top of the mechanism so that the gears that moved the variable resisters were showing. He tipped this upside down and would use it just like a mouse. At this time there were no mice. Not a long time after than mice showed up on the scene. I don't know if it was my and Dr. McCown's cooperation improved or if someone else came up with that independently but I do know that Dr.. McCown most certainly was the first to be using a mouse-like mechanism. |
#7
|
|||
|
|||
Handlebar rotation
|
#8
|
|||
|
|||
Handlebar rotation
On Wed, 05 Jul 2017 07:08:02 -0700, Joerg
wrote: On 2017-07-04 16:33, John B. wrote: On Tue, 04 Jul 2017 07:52:14 -0700, Joerg wrote: On 2017-07-04 04:05, John B. wrote: I was looking at photos and you tube films of bicycle racing during the 70's and 80's and it seems that the handle bars were at a very different position then in more recent times. Example: Eddie Marckx time trial 1974, note the downward twist of the handle bars. with the brake levers mounted at almost the center of the "U" bend. https://www.youtube.com/watch?v=vvJSB4gAq3o During a race in 1977 https://www.youtube.com/watch?v=tEAlxGC4Kzg In 1987, still turned down https://www.youtube.com/watch?v=GwU7GXvbjlM In 1990 https://www.youtube.com/watch?v=eojc3AKSWGE in 1994 https://www.youtube.com/watch?v=VtBetiDPPfg In 2001 what may be an intermediate position https://www.youtube.com/watch?v=KAqIVanqbuw In 2007 note how much flatter the bars are with the brake levers fixed almost as an extension of the top flat section of the bars. https://www.youtube.com/watch?v=dbB2O0SmwJw I am wondering. From the revival of bicycle racing in 1946 until the very late 1990's or early 2000's, some 50 years, handle bar position amongst the top riders was very similar with the top of the bars turned down and the bottom "drops" nearly level and then it all changed with the top section of the bars level, or nearly so and the drops angled downward. What happened? Did bicycle geometry suddenly change. Did bicycles get better? Were handlebars suddenly a different shape? Maybe riders complained of wrist pain? My bike from 1982 has the downward drop up top like in your older links. I can't ride it on the hoods for too long because then the wrists hurt from having to twist them too far. Especially on rough roads or dirt/gravel roads. But for almost fifty years, and maybe even longer (I didn't search for pre-WW II photos) top riders used essentially the same style of bars, and relatively suddenly they all seemed to have changed to a much flatter setup. It can take a long time to notice adverse health effects. For example, computer mice were not very ergonomical until 10-15 years ago. And they still sell the old style. Probably the industry didn't react until enough people developed hardcore carpal tunnel problems. I switched to a trackball within my first year because I thought this can't be good. I was using a computer long before a "mouse" was anything but a tiny creature and I've yet to develop carpal tunnel problems. Are bicycle riders somehow mentally deficient that it takes them 50 years to figure out why their wrists are getting sore? Who knows :-) It took the bicycle industry a whopping 100 years and they still haven't figured out a good electrical system. Unless you build your own like I do. Amazing! Yet people have been riding long distances on bicycles for years and years. The first Paris - Brest - Paris randonnée was held in 1891. An essentially non-stop bicycle ride of 1,200 km. The British, of course, do it better with the 1433 km London Edinburgh London 2017 and the 'mericans have the Boston-Montreal-Boston, again a 1,200 km ride but no longer an official randonnée and now strictly a permanent that anyone could ride on their own in a self-supported manner while still receiving recognition (validation) from Randonneurs USA. Think of it, 126 years of successful long distance bicycle riding without Joerg built lights. -- Cheers, John B. |
#9
|
|||
|
|||
Handlebar rotation
On 7/5/2017 7:49 PM, John B. wrote:
On Wed, 05 Jul 2017 07:08:02 -0700, Joerg wrote: On 2017-07-04 16:33, John B. wrote: On Tue, 04 Jul 2017 07:52:14 -0700, Joerg wrote: On 2017-07-04 04:05, John B. wrote: I was looking at photos and you tube films of bicycle racing during the 70's and 80's and it seems that the handle bars were at a very different position then in more recent times. Example: Eddie Marckx time trial 1974, note the downward twist of the handle bars. with the brake levers mounted at almost the center of the "U" bend. https://www.youtube.com/watch?v=vvJSB4gAq3o During a race in 1977 https://www.youtube.com/watch?v=tEAlxGC4Kzg In 1987, still turned down https://www.youtube.com/watch?v=GwU7GXvbjlM In 1990 https://www.youtube.com/watch?v=eojc3AKSWGE in 1994 https://www.youtube.com/watch?v=VtBetiDPPfg In 2001 what may be an intermediate position https://www.youtube.com/watch?v=KAqIVanqbuw In 2007 note how much flatter the bars are with the brake levers fixed almost as an extension of the top flat section of the bars. https://www.youtube.com/watch?v=dbB2O0SmwJw I am wondering. From the revival of bicycle racing in 1946 until the very late 1990's or early 2000's, some 50 years, handle bar position amongst the top riders was very similar with the top of the bars turned down and the bottom "drops" nearly level and then it all changed with the top section of the bars level, or nearly so and the drops angled downward. What happened? Did bicycle geometry suddenly change. Did bicycles get better? Were handlebars suddenly a different shape? Maybe riders complained of wrist pain? My bike from 1982 has the downward drop up top like in your older links. I can't ride it on the hoods for too long because then the wrists hurt from having to twist them too far. Especially on rough roads or dirt/gravel roads. But for almost fifty years, and maybe even longer (I didn't search for pre-WW II photos) top riders used essentially the same style of bars, and relatively suddenly they all seemed to have changed to a much flatter setup. It can take a long time to notice adverse health effects. For example, computer mice were not very ergonomical until 10-15 years ago. And they still sell the old style. Probably the industry didn't react until enough people developed hardcore carpal tunnel problems. I switched to a trackball within my first year because I thought this can't be good. I was using a computer long before a "mouse" was anything but a tiny creature and I've yet to develop carpal tunnel problems. Are bicycle riders somehow mentally deficient that it takes them 50 years to figure out why their wrists are getting sore? Who knows :-) It took the bicycle industry a whopping 100 years and they still haven't figured out a good electrical system. Unless you build your own like I do. Amazing! Yet people have been riding long distances on bicycles for years and years. The first Paris - Brest - Paris randonnée was held in 1891. An essentially non-stop bicycle ride of 1,200 km. The British, of course, do it better with the 1433 km London Edinburgh London 2017 and the 'mericans have the Boston-Montreal-Boston, again a 1,200 km ride but no longer an official randonnée and now strictly a permanent that anyone could ride on their own in a self-supported manner while still receiving recognition (validation) from Randonneurs USA. Think of it, 126 years of successful long distance bicycle riding without Joerg built lights. But it's not safe! Every one of the 1891 PBP riders is dead! -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
#10
|
|||
|
|||
Handlebar rotation
On 2017-07-05 17:49, John B. wrote:
On Wed, 05 Jul 2017 07:08:02 -0700, Joerg wrote: On 2017-07-04 16:33, John B. wrote: On Tue, 04 Jul 2017 07:52:14 -0700, Joerg wrote: On 2017-07-04 04:05, John B. wrote: I was looking at photos and you tube films of bicycle racing during the 70's and 80's and it seems that the handle bars were at a very different position then in more recent times. Example: Eddie Marckx time trial 1974, note the downward twist of the handle bars. with the brake levers mounted at almost the center of the "U" bend. https://www.youtube.com/watch?v=vvJSB4gAq3o During a race in 1977 https://www.youtube.com/watch?v=tEAlxGC4Kzg In 1987, still turned down https://www.youtube.com/watch?v=GwU7GXvbjlM In 1990 https://www.youtube.com/watch?v=eojc3AKSWGE in 1994 https://www.youtube.com/watch?v=VtBetiDPPfg In 2001 what may be an intermediate position https://www.youtube.com/watch?v=KAqIVanqbuw In 2007 note how much flatter the bars are with the brake levers fixed almost as an extension of the top flat section of the bars. https://www.youtube.com/watch?v=dbB2O0SmwJw I am wondering. From the revival of bicycle racing in 1946 until the very late 1990's or early 2000's, some 50 years, handle bar position amongst the top riders was very similar with the top of the bars turned down and the bottom "drops" nearly level and then it all changed with the top section of the bars level, or nearly so and the drops angled downward. What happened? Did bicycle geometry suddenly change. Did bicycles get better? Were handlebars suddenly a different shape? Maybe riders complained of wrist pain? My bike from 1982 has the downward drop up top like in your older links. I can't ride it on the hoods for too long because then the wrists hurt from having to twist them too far. Especially on rough roads or dirt/gravel roads. But for almost fifty years, and maybe even longer (I didn't search for pre-WW II photos) top riders used essentially the same style of bars, and relatively suddenly they all seemed to have changed to a much flatter setup. It can take a long time to notice adverse health effects. For example, computer mice were not very ergonomical until 10-15 years ago. And they still sell the old style. Probably the industry didn't react until enough people developed hardcore carpal tunnel problems. I switched to a trackball within my first year because I thought this can't be good. I was using a computer long before a "mouse" was anything but a tiny creature and I've yet to develop carpal tunnel problems. Are bicycle riders somehow mentally deficient that it takes them 50 years to figure out why their wrists are getting sore? Who knows :-) It took the bicycle industry a whopping 100 years and they still haven't figured out a good electrical system. Unless you build your own like I do. Amazing! Yet people have been riding long distances on bicycles for years and years. The first Paris - Brest - Paris randonnée was held in 1891. An essentially non-stop bicycle ride of 1,200 km. The British, of course, do it better with the 1433 km London Edinburgh London 2017 and the 'mericans have the Boston-Montreal-Boston, again a 1,200 km ride but no longer an official randonnée and now strictly a permanent that anyone could ride on their own in a self-supported manner while still receiving recognition (validation) from Randonneurs USA. Think of it, 126 years of successful long distance bicycle riding without Joerg built lights. It's simple. Most humans have a habit of accepting current state-of-the-art as "that's as good as it gets". I don't, and I derive most of my income from not thinking that way. And yes, I already had bicycles with real electrical systems when I was a teenager. -- Regards, Joerg http://www.analogconsultants.com/ |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
tube rotation | raging raven | Techniques | 37 | April 16th 10 04:11 PM |
Four-dimensional Rotation of the Universe. | Ivan Gorelik | Rides | 8 | March 30th 09 07:27 AM |
Four-dimensional Rotation of the Universe. | Ivan Gorelik | Marketplace | 4 | March 30th 09 12:00 AM |
Tire Rotation | Tom Nakashima | Techniques | 54 | August 15th 05 11:39 PM |
tyre rotation | geepeetee | UK | 4 | April 20th 05 06:17 PM |