A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Techniques
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Name of screw that holds the rear brake cable



 
 
Thread Tools Display Modes
  #91  
Old August 23rd 19, 01:12 AM posted to rec.bicycles.tech
Frank Krygowski[_4_]
external usenet poster
 
Posts: 10,538
Default Name of screw that holds the rear brake cable

On 8/22/2019 7:56 PM, John B. Slocomb wrote:
On Thu, 22 Aug 2019 11:25:48 -0400, Frank Krygowski
wrote:

On 8/22/2019 5:43 AM, John B. Slocomb wrote:
On Wed, 21 Aug 2019 19:54:55 -0400, Frank Krygowski
wrote:

On 8/21/2019 6:54 PM, John B. Slocomb wrote:
On Wed, 21 Aug 2019 13:09:30 -0400, Frank Krygowski
wrote:

On 8/21/2019 12:19 PM, jbeattie wrote:

Having looked through the fasteners at my local Ace many, many times, I can guaranty you there there is no drawer, box or fastener labeled "Internal Wrenching Bolt." Maybe such a bolt exists, but what I use on my bike is labeled as a socket head cap screw. Go to Grainger: https://tinyurl.com/y4y89fww Type in "internal Wrenching Bolt" and see what comes up. Nada. An internal wrenching bolt is some odd-ball aircraft/military fastener with inch dimensions. It's not a metric fastener. Now go to the internet and type in "internal wrenching bolt" -- and get a bunch of military crap. https://military-fasteners.com/bolts...renching+bolts

The military has a long history of unusual names. For example:

================================================== =========

"'I understand,'' the Maine Republican said, ''that there is a story
coming out about a $600 toilet seat.''

''I think that gives new meaning to the word throne,'' Cohen added
before casually dropping the subject and moving on to weightier issues,
such as space defense and NATO burden sharing.

Within hours, the Defense Department publicists had cranked out a
statement challenging the senator`s characterization of the transaction.
Actually, the statement said, the Pentagon didn`t pay more than $600 for
a toilet seat.

''We believe the senator was referring to a lavatory cover which we have
recently learned has been priced at more than $600 by the contractor,
the Lockheed Corp.,'' the statement said.

According to Nick Duretta of Lockheed`s public information office, there
is a difference between a toilet seat and the lavatory cover purchased
for P-3 patrol planes that are now out of production.

''It (the lavatory cover) is more complex than a toilet seat,'' Duretta
said."

================================================== ========

That was pretty common knowledge in the sections that were in the
business of trying to keep experimental airplanes flying)

The story was that the A.F. had ordered a toilet "can"
cover for an experimental aircraft for which there was no spares in
the supply system, or manufacturer's stocks. What is the correct price
to set up and manufacture a cover, probably dimensioned in tenths of
thousands and made of some erotic material?

Hmm. I'd first do away with the "erotic" material. You don't want
flyboys getting hot, bothered and distracted.

You have obviously never been around military airplanes. Every part is
specified in sufficient detail to manufacture exact of copies, which
of course is what the specs are for :-)


You're glossing over the "erotic" part!


Frank, when it comes to airplanes and parts there are no "erotic"
parts there are specified parts and a specified way of installing
them, right down to, in some cases, the sequence of tightening the
bolts.


Hmm. Either John hasn't yet spotted his misspelling, or he's completely
missing the subsequent joke.

--
- Frank Krygowski
Ads
  #92  
Old August 23rd 19, 01:59 AM posted to rec.bicycles.tech
John B. Slocomb
external usenet poster
 
Posts: 547
Default Name of screw that holds the rear brake cable

On Thu, 22 Aug 2019 20:12:36 -0400, Frank Krygowski
wrote:

On 8/22/2019 7:56 PM, John B. Slocomb wrote:
On Thu, 22 Aug 2019 11:25:48 -0400, Frank Krygowski
wrote:

On 8/22/2019 5:43 AM, John B. Slocomb wrote:
On Wed, 21 Aug 2019 19:54:55 -0400, Frank Krygowski
wrote:

On 8/21/2019 6:54 PM, John B. Slocomb wrote:
On Wed, 21 Aug 2019 13:09:30 -0400, Frank Krygowski
wrote:

On 8/21/2019 12:19 PM, jbeattie wrote:

Having looked through the fasteners at my local Ace many, many times, I can guaranty you there there is no drawer, box or fastener labeled "Internal Wrenching Bolt." Maybe such a bolt exists, but what I use on my bike is labeled as a socket head cap screw. Go to Grainger: https://tinyurl.com/y4y89fww Type in "internal Wrenching Bolt" and see what comes up. Nada. An internal wrenching bolt is some odd-ball aircraft/military fastener with inch dimensions. It's not a metric fastener. Now go to the internet and type in "internal wrenching bolt" -- and get a bunch of military crap. https://military-fasteners.com/bolts...renching+bolts

The military has a long history of unusual names. For example:

================================================== =========

"'I understand,'' the Maine Republican said, ''that there is a story
coming out about a $600 toilet seat.''

''I think that gives new meaning to the word throne,'' Cohen added
before casually dropping the subject and moving on to weightier issues,
such as space defense and NATO burden sharing.

Within hours, the Defense Department publicists had cranked out a
statement challenging the senator`s characterization of the transaction.
Actually, the statement said, the Pentagon didn`t pay more than $600 for
a toilet seat.

''We believe the senator was referring to a lavatory cover which we have
recently learned has been priced at more than $600 by the contractor,
the Lockheed Corp.,'' the statement said.

According to Nick Duretta of Lockheed`s public information office, there
is a difference between a toilet seat and the lavatory cover purchased
for P-3 patrol planes that are now out of production.

''It (the lavatory cover) is more complex than a toilet seat,'' Duretta
said."

================================================== ========

That was pretty common knowledge in the sections that were in the
business of trying to keep experimental airplanes flying)

The story was that the A.F. had ordered a toilet "can"
cover for an experimental aircraft for which there was no spares in
the supply system, or manufacturer's stocks. What is the correct price
to set up and manufacture a cover, probably dimensioned in tenths of
thousands and made of some erotic material?

Hmm. I'd first do away with the "erotic" material. You don't want
flyboys getting hot, bothered and distracted.

You have obviously never been around military airplanes. Every part is
specified in sufficient detail to manufacture exact of copies, which
of course is what the specs are for :-)

You're glossing over the "erotic" part!


Frank, when it comes to airplanes and parts there are no "erotic"
parts there are specified parts and a specified way of installing
them, right down to, in some cases, the sequence of tightening the
bolts.


Hmm. Either John hasn't yet spotted his misspelling, or he's completely
missing the subsequent joke.


:-) Nope :-) I was simply ignoring you :-)
--

Cheers,

John B.
  #93  
Old August 23rd 19, 04:37 PM posted to rec.bicycles.tech
Frank Krygowski[_4_]
external usenet poster
 
Posts: 10,538
Default Name of screw that holds the rear brake cable

On 8/22/2019 8:59 PM, John B. Slocomb wrote:
On Thu, 22 Aug 2019 20:12:36 -0400, Frank Krygowski
wrote:

On 8/22/2019 7:56 PM, John B. Slocomb wrote:
On Thu, 22 Aug 2019 11:25:48 -0400, Frank Krygowski
wrote:

On 8/22/2019 5:43 AM, John B. Slocomb wrote:
On Wed, 21 Aug 2019 19:54:55 -0400, Frank Krygowski
wrote:

On 8/21/2019 6:54 PM, John B. Slocomb wrote:
On Wed, 21 Aug 2019 13:09:30 -0400, Frank Krygowski
wrote:

On 8/21/2019 12:19 PM, jbeattie wrote:

Having looked through the fasteners at my local Ace many, many times, I can guaranty you there there is no drawer, box or fastener labeled "Internal Wrenching Bolt." Maybe such a bolt exists, but what I use on my bike is labeled as a socket head cap screw. Go to Grainger: https://tinyurl.com/y4y89fww Type in "internal Wrenching Bolt" and see what comes up. Nada. An internal wrenching bolt is some odd-ball aircraft/military fastener with inch dimensions. It's not a metric fastener. Now go to the internet and type in "internal wrenching bolt" -- and get a bunch of military crap. https://military-fasteners.com/bolts...renching+bolts

The military has a long history of unusual names. For example:

================================================== =========

"'I understand,'' the Maine Republican said, ''that there is a story
coming out about a $600 toilet seat.''

''I think that gives new meaning to the word throne,'' Cohen added
before casually dropping the subject and moving on to weightier issues,
such as space defense and NATO burden sharing.

Within hours, the Defense Department publicists had cranked out a
statement challenging the senator`s characterization of the transaction.
Actually, the statement said, the Pentagon didn`t pay more than $600 for
a toilet seat.

''We believe the senator was referring to a lavatory cover which we have
recently learned has been priced at more than $600 by the contractor,
the Lockheed Corp.,'' the statement said.

According to Nick Duretta of Lockheed`s public information office, there
is a difference between a toilet seat and the lavatory cover purchased
for P-3 patrol planes that are now out of production.

''It (the lavatory cover) is more complex than a toilet seat,'' Duretta
said."

================================================== ========

That was pretty common knowledge in the sections that were in the
business of trying to keep experimental airplanes flying)

The story was that the A.F. had ordered a toilet "can"
cover for an experimental aircraft for which there was no spares in
the supply system, or manufacturer's stocks. What is the correct price
to set up and manufacture a cover, probably dimensioned in tenths of
thousands and made of some erotic material?

Hmm. I'd first do away with the "erotic" material. You don't want
flyboys getting hot, bothered and distracted.

You have obviously never been around military airplanes. Every part is
specified in sufficient detail to manufacture exact of copies, which
of course is what the specs are for :-)

You're glossing over the "erotic" part!

Frank, when it comes to airplanes and parts there are no "erotic"
parts there are specified parts and a specified way of installing
them, right down to, in some cases, the sequence of tightening the
bolts.


Hmm. Either John hasn't yet spotted his misspelling, or he's completely
missing the subsequent joke.


:-) Nope :-) I was simply ignoring you :-)


In other words "Oops... um, I meant to do that."


--
- Frank Krygowski
  #94  
Old August 24th 19, 12:27 AM posted to rec.bicycles.tech
jOHN b.
external usenet poster
 
Posts: 2,421
Default Name of screw that holds the rear brake cable

On Fri, 23 Aug 2019 11:37:49 -0400, Frank Krygowski
wrote:

On 8/22/2019 8:59 PM, John B. Slocomb wrote:
On Thu, 22 Aug 2019 20:12:36 -0400, Frank Krygowski
wrote:

On 8/22/2019 7:56 PM, John B. Slocomb wrote:
On Thu, 22 Aug 2019 11:25:48 -0400, Frank Krygowski
wrote:

On 8/22/2019 5:43 AM, John B. Slocomb wrote:
On Wed, 21 Aug 2019 19:54:55 -0400, Frank Krygowski
wrote:

On 8/21/2019 6:54 PM, John B. Slocomb wrote:
On Wed, 21 Aug 2019 13:09:30 -0400, Frank Krygowski
wrote:

On 8/21/2019 12:19 PM, jbeattie wrote:

Having looked through the fasteners at my local Ace many, many times, I can guaranty you there there is no drawer, box or fastener labeled "Internal Wrenching Bolt." Maybe such a bolt exists, but what I use on my bike is labeled as a socket head cap screw. Go to Grainger: https://tinyurl.com/y4y89fww Type in "internal Wrenching Bolt" and see what comes up. Nada. An internal wrenching bolt is some odd-ball aircraft/military fastener with inch dimensions. It's not a metric fastener. Now go to the internet and type in "internal wrenching bolt" -- and get a bunch of military crap. https://military-fasteners.com/bolts...renching+bolts

The military has a long history of unusual names. For example:

================================================== =========

"'I understand,'' the Maine Republican said, ''that there is a story
coming out about a $600 toilet seat.''

''I think that gives new meaning to the word throne,'' Cohen added
before casually dropping the subject and moving on to weightier issues,
such as space defense and NATO burden sharing.

Within hours, the Defense Department publicists had cranked out a
statement challenging the senator`s characterization of the transaction.
Actually, the statement said, the Pentagon didn`t pay more than $600 for
a toilet seat.

''We believe the senator was referring to a lavatory cover which we have
recently learned has been priced at more than $600 by the contractor,
the Lockheed Corp.,'' the statement said.

According to Nick Duretta of Lockheed`s public information office, there
is a difference between a toilet seat and the lavatory cover purchased
for P-3 patrol planes that are now out of production.

''It (the lavatory cover) is more complex than a toilet seat,'' Duretta
said."

================================================== ========

That was pretty common knowledge in the sections that were in the
business of trying to keep experimental airplanes flying)

The story was that the A.F. had ordered a toilet "can"
cover for an experimental aircraft for which there was no spares in
the supply system, or manufacturer's stocks. What is the correct price
to set up and manufacture a cover, probably dimensioned in tenths of
thousands and made of some erotic material?

Hmm. I'd first do away with the "erotic" material. You don't want
flyboys getting hot, bothered and distracted.

You have obviously never been around military airplanes. Every part is
specified in sufficient detail to manufacture exact of copies, which
of course is what the specs are for :-)

You're glossing over the "erotic" part!

Frank, when it comes to airplanes and parts there are no "erotic"
parts there are specified parts and a specified way of installing
them, right down to, in some cases, the sequence of tightening the
bolts.

Hmm. Either John hasn't yet spotted his misspelling, or he's completely
missing the subsequent joke.


:-) Nope :-) I was simply ignoring you :-)


In other words "Oops... um, I meant to do that."


Well, you are prone to interject some witty saying as a sort "well
that's all folks" ending when you realize that you are on the weak
side of the discussion.

Which, let it be said, is a far superior tactic to Tom's invariable
change in context of the entire discussing.

So, one might say, that I was being polite I just nodded my head and
went on the the next subject.

--
cheers,

John B.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
brake adjust screw (screw with hole and cylinder) Emanuel Berg[_2_] Techniques 5 May 22nd 18 08:57 PM
Converting a Brake Cable To a Shifter Cable Bret Cahill Techniques 42 March 8th 07 09:43 PM
Campagnolo brake cable sheath & brake receptacle doesn't fit Artoi Techniques 2 November 2nd 06 08:22 PM
What screw to attach C'dale BB cable guide? Hank Wirtz Techniques 6 August 22nd 05 02:30 AM
Rear rack which holds U-Lock? Gooserider General 10 June 30th 04 12:02 AM


All times are GMT +1. The time now is 09:31 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.