A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » Regional Cycling » Australia
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

BR16



 
 
Thread Tools Display Modes
  #1  
Old October 9th 04, 11:18 PM
blah
external usenet poster
 
Posts: n/a
Default BR16

Well, 8.10am and here I am at work... Was all set to go this morning,
running a bit late, hoping to catch the group as it came down Donnie
Road. Flat. Inside, before I'd even left the house. Had the wheel off
in ten seconds then started to think - only got one spare tube; do I
go out without a spare or what? It all became academic when I saw the
small chunk out of the tyre that probably has the puncture under it.
Into the shower to get all the sunscreen off and drove into work (Kew)
where I was going to get off the ride anyway. I figure I'll do what I
have to here and ride this afternoon in what should be a ripper of a
day after I've sorted out this tyre/tube thing.
Hope y'all had a good one.
  #2  
Old October 10th 04, 01:47 AM
flyingdutch
external usenet poster
 
Posts: n/a
Default BR16


blah Wrote:
I figure I'll do what I
have to here and ride this afternoon in what should be a ripper of a
day after I've sorted out this tyre/tube thing.
Hope y'all had a good one.


just got in. a pearler!!!

Just Geoff, Tony and Mo

--
flyingdutch

  #3  
Old October 10th 04, 04:58 AM
hippy
external usenet poster
 
Posts: n/a
Default BR16

"flyingdutch"

blah Wrote:
I figure I'll do what I
have to here and ride this afternoon in what should be a ripper of a
day after I've sorted out this tyre/tube thing.
Hope y'all had a good one.


just got in. a pearler!!!
Just Geoff, Tony and Moi


Cool guys! I achieved my goal today of sticking
with the Glenvale C bunch until the line. Another
couple of months training at higher intensity and
I'll be in front at the line :-)
Damn those bunches are huge there now!
Damn the pace is high! One dude pedal hit
and another stuffed a corner totally and hit the
curb, right in front of me. Looked good as he
did the superman impersonation.. it probably
helped coz he would've landed on grass..

hippy


  #4  
Old October 10th 04, 07:47 AM
flyingdutch
external usenet poster
 
Posts: n/a
Default BR16


hippy Wrote:

Cool guys! I achieved my goal today of sticking
with the Glenvale C bunch until the line. Another
couple of months training at higher intensity and
I'll be in front at the line :-)
Damn those bunches are huge there now!
Damn the pace is high! One dude pedal hit
and another stuffed a corner totally and hit the
curb, right in front of me. Looked good as he
did the superman impersonation.. it probably
helped coz he would've landed on grass..

hippy


what kind of numbers do you get there?

guess i need to get that licence to race at Glenvale, huh?
the Hawthorn club membership allowed me to dip my toe last summer.

What kind of gearing and speed do you do there?
my bike's fine for Kew (alas the 'engine' aint

--
flyingdutch

  #5  
Old October 10th 04, 02:43 PM
hippy
external usenet poster
 
Posts: n/a
Default BR16

"flyingdutch"
hippy Wrote:
Cool guys! I achieved my goal today of sticking
with the Glenvale C bunch until the line. Another


what kind of numbers do you get there?


I'm sure it used to be 20-30 riders, now it's like 60+.

guess i need to get that licence to race at Glenvale, huh?


Yep, unless you wanna pay for a day license every race.

the Hawthorn club membership allowed me to dip my toe last summer.


How come you didn't renew? You could've been racing
all winter... slacker! ;-) (just like I didn't.. )

What kind of gearing and speed do you do there?
my bike's fine for Kew (alas the 'engine' aint )


Race Glenvale or Dalmore or Dunlop or METEC
or Nyadale.. No silly hills. Well, METEC and
Nyadale have little 'bumps'.

Speed and gearing.. I'll just get the Polar data.. hang on..
55min, HR: 172/193, 36.4k, 28.4kph 40.1kph,
Cad: 107bpm, 23degC

40.1kph! That can't be right?!
No wonder I'm shagged out after racing..

hippy


  #6  
Old October 10th 04, 09:19 PM
flyingdutch
external usenet poster
 
Posts: n/a
Default BR16


hippy Wrote:
Speed and gearing.. I'll just get the Polar data.. hang on..
55min, HR: 172/193, 36.4k, 28.4kph 40.1kph,
Cad: 107bpm, 23degC

40.1kph! That can't be right?!
No wonder I'm shagged out after racing..

hippy


what do the numbers represent?, exactly

--
flyingdutch

  #7  
Old October 12th 04, 12:45 PM
Geoff
external usenet poster
 
Posts: n/a
Default BR16


"hippy" wrote in message
...

40.1kph! That can't be right?!


Doesn't sound too far off the mark for C Grade and that circuit. I can
remember one race last year at Glenvale Cres. when the speeds on a couple of
laps where up around the 50km/h mark but the overall avg was below 40km/h.
What was your max speed during this race?

No wonder I'm shagged out after racing..

hippy




  #8  
Old October 13th 04, 10:30 AM
Etxy
external usenet poster
 
Posts: n/a
Default BR16


hippy Wrote:

Race Glenvale or Dalmore or Dunlop or METEC
or Nyadale.. No silly hills. Well, METEC and
Nyadale have little 'bumps'.


Nyadale is not a bump!!! I almost died when I rode a
Nyadale in my first race ever. That was 2.5 years ago, I guess..


A question- what does BR mean? In the context of BR16 or whatever

--
Etxy

  #9  
Old October 10th 04, 08:30 AM
ritcho
external usenet poster
 
Posts: n/a
Default BR16


hippy Wrote:
"flyingdutch"

blah Wrote:
I figure I'll do what I
have to here and ride this afternoon in what should be a ripper o

a
day after I've sorted out this tyre/tube thing.
Hope y'all had a good one.


just got in. a pearler!!!
Just Geoff, Tony and Moi


Cool guys! I achieved my goal today of sticking
with the Glenvale C bunch until the line. Another
couple of months training at higher intensity and
I'll be in front at the line :-)
Damn those bunches are huge there now!
Damn the pace is high! One dude pedal hit
and another stuffed a corner totally and hit the
curb, right in front of me. Looked good as he
did the superman impersonation.. it probably
helped coz he would've landed on grass..

hippy


Hey well done! I've not seen the course at Glenvale - my interest i
racing started after I left Melbourne 5 years ago....

... 5 minutes elapses...

ha ha ha ha - you wouldn't read about it. I just looked up th
reference for Glenvale Cr. I used to live in Orion Crt, Mulgrave
literally a stone's throw away! Too bad I was more interested in racin
motorbikes...

Ritc

--
ritcho

  #10  
Old October 10th 04, 02:48 PM
hippy
external usenet poster
 
Posts: n/a
Default BR16

"ritcho"
Hey well done! I've not seen the course at Glenvale - my interest in
racing started after I left Melbourne 5 years ago....

.. 5 minutes elapses...

ha ha ha ha - you wouldn't read about it. I just looked up the
reference for Glenvale Cr. I used to live in Orion Crt, Mulgrave -
literally a stone's throw away! Too bad I was more interested in racing
motorbikes...


That'll learn ya! I have a CBR 250 in my
garage at the moment. I loaned a friend my
car for a couple of weeks, because apparently,
moving house using a motorbike is tricky?
If only I could ride the damn thing..

Dunlop Rd. is just down Springvale Rd. Does
anyone still race there? I liked that circuit..

hippy



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 12:55 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.