|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Can put a Shimano Exage crank on a V eloce BB?
Buddy has an old square taper Campy Veloce sealed bottom bracket he wa nts to put an aero looking Exage crank on. Will that work?
Thanks and cheers. |
Ads |
#2
|
|||
|
|||
Can put a Shimano Exage crank on a V eloce BB?
On 3/30/2014 7:07 AM, Sir Ridesalot wrote:
Buddy has an old square taper Campy Veloce sealed bottom bracket he wa nts to put an aero looking Exage crank on. Will that work? Part number from the inside of the Shimano arm? It starts FC-M or FC-A something. Is it double or triple? Veloce are 111 symmetric which I suppose you already measured. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
#3
|
|||
|
|||
Can put a Shimano Exage crank on a V eloce BB?
On Sunday, March 30, 2014 2:20:19 PM UTC-4, AMuzi wrote:
On 3/30/2014 7:07 AM, Sir Ridesalot wrote: Buddy has an old square taper Campy Veloce sealed bottom bracket he wa nts to put an aero looking Exage crank on. Will that work? Part number from the inside of the Shimano arm? It starts FC-M or FC-A something. Is it double or triple? Veloce are 111 symmetric which I suppose you already measured. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 Both the bottom bracket and crankset are triple. Cheers |
#4
|
|||
|
|||
Can put a Shimano Exage crank on a V eloce BB?
Sir Ridesalot wrote:
AMuzi wrote: Sir Ridesalot wrote: Buddy has an old square taper Campy Veloce sealed bottom bracket he wa nts to put an aero looking Exage crank on. Will that work? Part number from the inside of the Shimano arm? It starts FC-M or FC-A something. Is it double or triple? Veloce are 111 symmetric which I suppose you already measured. Both the bottom bracket and crankset are triple. Veloce uses the same 111mm spindle for double and for triple. If it's an FC-M450 for example you'll need an asymmetric 117.5mm spindle (conveniently called BB-M450 in Shimanoese). -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
#5
|
|||
|
|||
Can put a Shimano Exage crank on a V eloce BB?
On Sunday, March 30, 2014 7:07:53 AM UTC-5, Sir Ridesalot wrote:
Buddy has an old square taper Campy Veloce sealed bottom bracket he wa nts to put an aero looking Exage crank on. Will that work? Odd. For some reason Andrew Muzi is forgetting that Campagnolo bottom brackets use the ISO taper. While Shimano cranksets and bottom brackets use the JIS (Japanese Industrial Standard) taper. I cannot recall right now which is thinner and which is thicker. So not sure if the Shimano crank will slide on a bit too far or not far enough onto the Campagnolo Veloce bottom bracket. Not sure if the crank will slide too far onto the bottom bracket and make the bolt bottom out on the end of the bottom bracket and not on the crank. |
#7
|
|||
|
|||
Can put a Shimano Exage crank on a V eloce BB?
|
#8
|
|||
|
|||
Can put a Shimano Exage crank on a V eloce BB?
On 3/31/2014 2:22 PM, Duane wrote:
On 3/31/2014 3:17 PM, wrote: On Sunday, March 30, 2014 7:07:53 AM UTC-5, Sir Ridesalot wrote: Buddy has an old square taper Campy Veloce sealed bottom bracket he wa nts to put an aero looking Exage crank on. Will that work? Odd. For some reason Andrew Muzi is forgetting that Campagnolo bottom brackets use the ISO taper. While Shimano cranksets and bottom brackets use the JIS (Japanese Industrial Standard) taper. I cannot recall right now which is thinner and which is thicker. So not sure if the Shimano crank will slide on a bit too far or not far enough onto the Campagnolo Veloce bottom bracket. Not sure if the crank will slide too far onto the bottom bracket and make the bolt bottom out on the end of the bottom bracket and not on the crank. Are you thinking of the BB30 adapters? http://wheelsmfg.com/products/bb-cra...-adapters.html Nope. OP had a 25 year old Shimano Exage triple crank. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
shimano exage 500ex cranks | chris | UK | 4 | July 27th 11 11:05 PM |
Shimano Exage Motion Components | Benjamin Goldenberg | Marketplace | 1 | August 14th 07 12:50 AM |
FS - 14 speed road kit (Shimano Exage/Suntour) | [email protected] | Marketplace | 0 | June 12th 06 02:43 AM |
FS: Shimano Exage brake levers | Andrew Karre | Marketplace | 0 | June 19th 05 11:54 PM |
Doable - a 9 gear Shimano Cluster on a 7 speed Shimano Exage hub? | Peter | General | 4 | April 29th 04 09:52 AM |