|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
CAD Drawing for Bicycle Parts?
Where can I find 3D CAD drawings for Bicycle parts? I am making a
Tadpole Recumbent Tricycle and want to draw it up in 3D CAD. I have AutoCAD Inventor at work and can import almost any 3D file. I am looking for wheels, rims especially the Sun Rhyno Lite rims in both 20" (406) and 26" with Schoabe Big Apple tires, pedels, and bottom brackets. For the Sun Rhyno Lite it would help if I could get an accurate crossection drawing, it is easy to rovolve to the complete rim. My first request is for rear internally geared hubs. I could use both Sturmy-Archer AW and Shimano 3 speed interally geared hub drawing. They do not have to be internally correct, just have the chain line and over the hub dimensions correct. Any Help is appreciated. Ramer |
Ads |
#2
|
|||
|
|||
CAD Drawing for Bicycle Parts?
On Mon, 12 Apr 2010 20:24:14 -0500, "Ramer W. Streed"
wrote: Where can I find 3D CAD drawings for Bicycle parts? Type of file and CAD program? Amazing what one can find with Google: http://www.ihpva.org/Projects/CADLibrary/index.htm http://www.bikeforest.com/CAD/ http://www.sharewarejunction.com/info7909.htm http://www.cadforum.cz/catalog_en/?q=bicycle http://www.3dcadbrowser.com/browse.aspx?category=16 Also, type in "bicycle" into the search box for more. etc... -- Jeff Liebermann 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558 |
#3
|
|||
|
|||
CAD Drawing for Bicycle Parts?
Jeff Liebermann wrote:
On Mon, 12 Apr 2010 20:24:14 -0500, "Ramer W. Streed" wrote: Where can I find 3D CAD drawings for Bicycle parts? Type of file and CAD program? Amazing what one can find with Google: http://www.ihpva.org/Projects/CADLibrary/index.htm http://www.bikeforest.com/CAD/ http://www.sharewarejunction.com/info7909.htm http://www.cadforum.cz/catalog_en/?q=bicycle http://www.3dcadbrowser.com/browse.aspx?category=16 Also, type in "bicycle" into the search box for more. etc... I use Autodesk Inventor but can import most 3d versions. I need 20 and 26 inch Sun Rhyno Lite rinm. 20 mm throu axle disk brake hubs. Shimano and Sturmy Archer 3 speed internally gearde hubs. Thasks. Whi i have found onlin is very week, bustly 2d drawings, but I will try your suggestions. Ramer |
#4
|
|||
|
|||
CAD Drawing for Bicycle Parts?
Ramer W. Streed wrote:
Where can I find 3D CAD drawings for Bicycle parts? *I am making a Tadpole Recumbent Tricycle and want to draw it up in 3D CAD. You know, for all the time it would take for you to make CAD models detailed down to the cross-sections of the rims, you could instead have a lot of progress actually making the thing. When I make CAD models of bikes and trikes, I just use toroids as place holders for the tires, plus simple shapes that stand in for the hubs. Since I'm not manufacturing those parts, the only reasons they need to be in the model are to establish geometrical reference points and to check for interferences. If you feel you need much more detail than that, I think you should ask yourself whether you are making a trike, or rather a CAD model of a trike. Chalo |
#5
|
|||
|
|||
CAD Drawing for Bicycle Parts?
On Fri, 16 Apr 2010 21:34:20 -0500, "Ramer W. Streed"
wrote: I need 20 and 26 inch Sun Rhyno Lite rinm. 20 mm throu axle disk brake hubs. Shimano and Sturmy Archer 3 speed internally gearde hubs. Thasks. Whi i have found onlin is very week, bustly 2d drawings, but I will try your suggestions. It's not likely that manufacturers will post dimensionally accurate drawings of their products. That's an easy invitation to have the part cloned by a compeditor. What you'll probably find are reverse engineered drawings done by various builders. The few that I've found rarely reflect exact model numbers and seem to be listed as a generic component. Unless you're using ACAD Inventor to test for fit, overlap, clearances, and tolerances (all unlikely), these generic models can probably be scaled, stretched, and used. There's also no need to show every tooth in the crank and freewheel, when a simple circle showing the gear pitch or outside diameter will probably suffice. While not as artisitic looking, and unsuitable for promotional literature, simple drawing shapes are much easier and faster to work with. Good luck. -- Jeff Liebermann 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558 |
#6
|
|||
|
|||
CAD Drawing for Bicycle Parts?
Chalo wrote:
Ramer W. Streed wrote: Where can I find 3D CAD drawings for Bicycle parts? I am making a Tadpole Recumbent Tricycle and want to draw it up in 3D CAD. You know, for all the time it would take for you to make CAD models detailed down to the cross-sections of the rims, you could instead have a lot of progress actually making the thing. When I make CAD models of bikes and trikes, I just use toroids as place holders for the tires, plus simple shapes that stand in for the hubs. Since I'm not manufacturing those parts, the only reasons they need to be in the model are to establish geometrical reference points and to check for interferences. If you feel you need much more detail than that, I think you should ask yourself whether you are making a trike, or rather a CAD model of a trike. Chalo I need a little more accuricy to get the chain line between the rear hub and an intermeediate 3 speed hub that is used as an over/under drive. I dont need the internal, the part could be shrink wraped. Ramer |
#7
|
|||
|
|||
CAD Drawing for Bicycle Parts?
Hi Ramer W. Streed What happened finally? could you access bicycle parts freely? In fact i need bicycle rear hub specially it's mechanism. would you please help me? |
#8
|
|||
|
|||
CAD Drawing for Bicycle Parts?
On 2/17/2014 12:45 PM, wrote:
Hi Ramer W. Streed What happened finally? could you access bicycle parts freely? In fact i need bicycle rear hub specially it's mechanism. would you please help me? sure http://thecabe.com/vbulletin/images/...e450fa_o-1.jpg -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
#9
|
|||
|
|||
CAD Drawing for Bicycle Parts?
On Monday, February 17, 2014 3:03:50 PM UTC-5, AMuzi wrote:
On 2/17/2014 12:45 PM, wrote: Hi Ramer W. Streed What happened finally? could you access bicycle parts freely? In fact i need bicycle rear hub specially it's mechanism. would you please help me? sure http://thecabe.com/vbulletin/images/...e450fa_o-1.jpg -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 HHHHHHHHHHHHHHHHHH when I was uh 6, I had information overload nightmares from my neurons increasing connectivity. I sleep walked to the front door trying escapes into the expanded outside free world. Haunted house syndrome. https://www.google.com/search?q=expl...r+hub&tbm=isch |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best Bike Buys searches online bike stores to help you find bicycles,bikes, bicycle parts, bicycle clothing, and bicycle accessories | [email protected] | Mountain Biking | 0 | May 14th 08 09:55 PM |
funny drawing softwaScreenPen,drawing directly on screen! | [email protected] | Techniques | 0 | February 5th 06 03:49 PM |
Does Anyone Know Where I Can Get A Full Bicycle Blueprint Drawing? | Neoinventor | General | 3 | September 23rd 04 04:39 AM |
Does Anyone Know Where I Can Get A Full Bicycle Blueprint Drawing? | Neoinventor | General | 4 | September 22nd 04 06:59 AM |
Does Anyone Have a Complete CAD Drawing of a Bicycle?? | Neoinventor | Marketplace | 2 | June 18th 04 10:57 AM |