A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Techniques
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Dry lube?



 
 
Thread Tools Display Modes
  #1  
Old April 24th 18, 10:06 AM posted to rec.bicycles.tech
Tanguy Ortolo
external usenet poster
 
Posts: 71
Default Dry lube?

Dear cyclists,

After years using wet lubes in all conditions (currently, a specific
chain oil with PTFE from 3in1
http://www.3-en-un.fr/produit/lubrifiant-chaines-et-cables-250ml/),
and being used to seing my chain getting very dirty, I have just learnt
that I may avoid this by using dry lube instead.

Actually, I have heard of one specific product, the Squirt dry lube
http://www.squirtlube.com/our-products/. It is about twice more
expensive than the lubricant I am currently using, but it is supposed to
reduce cleaning work, and if it does make the chain cleaner, it may as
well reduce its wear and extend its life.

So, have any of you tried that lubricant, or any other dry one? Would
you recommend it rather than wet lubes? My most important usage is a
daily commuting through suburb streets and forest paths (in all weather
conditions, therfore quite muddy when it rains, but now that summer is
coming, it is going to be rather dry).

--
Â*Â*__o Tanguy
Â*__\,_
(_)|'(_)
  #2  
Old April 24th 18, 01:31 PM posted to rec.bicycles.tech
AMuzi
external usenet poster
 
Posts: 13,447
Default Dry lube?

On 4/24/2018 4:06 AM, Tanguy Ortolo wrote:
Dear cyclists,

After years using wet lubes in all conditions (currently, a specific
chain oil with PTFE from 3in1
http://www.3-en-un.fr/produit/lubrifiant-chaines-et-cables-250ml/),
and being used to seing my chain getting very dirty, I have just learnt
that I may avoid this by using dry lube instead.

Actually, I have heard of one specific product, the Squirt dry lube
http://www.squirtlube.com/our-products/. It is about twice more
expensive than the lubricant I am currently using, but it is supposed to
reduce cleaning work, and if it does make the chain cleaner, it may as
well reduce its wear and extend its life.

So, have any of you tried that lubricant, or any other dry one? Would
you recommend it rather than wet lubes? My most important usage is a
daily commuting through suburb streets and forest paths (in all weather
conditions, therfore quite muddy when it rains, but now that summer is
coming, it is going to be rather dry).


Because the dry lubricant is pushed out from under the
rollers but doesn't flow back in, you'll need to apply it
more frequently. Some riders prefer dry lubes and neither is
better once you adjust the replenishing interval to suit
your mileage and riding conditions.

--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971


  #3  
Old April 25th 18, 09:54 AM posted to rec.bicycles.tech
Tanguy Ortolo
external usenet poster
 
Posts: 71
Default Dry lube?

One other thing, I have seen suggestions of lubricating only the chain,
and not the sprockets and derailleur. However, I think the derailleur
sprockets still need some lubrication to roll with few friction, do they
not?

--
Tanguy
  #4  
Old April 25th 18, 04:43 PM posted to rec.bicycles.tech
Frank Krygowski[_4_]
external usenet poster
 
Posts: 10,538
Default Dry lube?

On 4/25/2018 4:54 AM, Tanguy Ortolo wrote:
One other thing, I have seen suggestions of lubricating only the chain,
and not the sprockets and derailleur. However, I think the derailleur
sprockets still need some lubrication to roll with few friction, do they
not?


No. The friction between the chain's rollers and the sprocket teeth is
negligible. And if you add any lubricant to those surfaces, the
lubricant will soon be filled with abrasive grime. That will accelerate
wear and probably increase the friction.

That's my estimation, anyway.

--
- Frank Krygowski
  #5  
Old April 26th 18, 10:03 AM posted to rec.bicycles.tech
Tanguy Ortolo
external usenet poster
 
Posts: 71
Default Dry lube?

Frank Krygowski, 2018-04-25 17:43+0200:
On 4/25/2018 4:54 AM, Tanguy Ortolo wrote:
One other thing, I have seen suggestions of lubricating only the chain,
and not the sprockets and derailleur. However, I think the derailleur
sprockets still need some lubrication to roll with few friction, do they
not?


No. The friction between the chain's rollers and the sprocket teeth is
negligible. And if you add any lubricant to those surfaces, the
lubricant will soon be filled with abrasive grime. That will accelerate
wear and probably increase the friction.


I was more thinking about the friction between the derailleur sprockets
and their axles, actually.

--
Tanguy
  #6  
Old April 26th 18, 01:39 PM posted to rec.bicycles.tech
AMuzi
external usenet poster
 
Posts: 13,447
Default Dry lube?

On 4/26/2018 4:03 AM, Tanguy Ortolo wrote:
Frank Krygowski, 2018-04-25 17:43+0200:
On 4/25/2018 4:54 AM, Tanguy Ortolo wrote:
One other thing, I have seen suggestions of lubricating only the chain,
and not the sprockets and derailleur. However, I think the derailleur
sprockets still need some lubrication to roll with few friction, do they
not?


No. The friction between the chain's rollers and the sprocket teeth is
negligible. And if you add any lubricant to those surfaces, the
lubricant will soon be filled with abrasive grime. That will accelerate
wear and probably increase the friction.


I was more thinking about the friction between the derailleur sprockets
and their axles, actually.


Indeed those squeak when run dry and the steel ones show
bright red oxide from heat. Yes, do lubricate them, which
for most models means slacking the bolt to get your
lubricant inside.

--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971


  #7  
Old April 26th 18, 03:36 PM posted to rec.bicycles.tech
Sepp Ruf
external usenet poster
 
Posts: 454
Default Dry lube?

AMuzi wrote:
On 4/26/2018 4:03 AM, Tanguy Ortolo wrote:
Frank Krygowski, 2018-04-25 17:43+0200:
On 4/25/2018 4:54 AM, Tanguy Ortolo wrote:
One other thing, I have seen suggestions of lubricating only the chain,
and not the sprockets and derailleur. However, I think the derailleur
sprockets still need some lubrication to roll with few friction, do they
not?

No. The friction between the chain's rollers and the sprocket teeth is
negligible. And if you add any lubricant to those surfaces, the
lubricant will soon be filled with abrasive grime. That will accelerate
wear and probably increase the friction.


I was more thinking about the friction between the derailleur sprockets
and their axles, actually.


Indeed those squeak when run dry and the steel ones show
bright red oxide from heat. Yes, do lubricate them, which
for most models means slacking the bolt to get your
lubricant inside.


But Tanguy has so little time! When damaged more than the rest of the
deraileur has aged, just get cheap sealed bearing jockey wheels, fit and
"forget"
https://tacx.com/fr/products/galets-de-derailleurs/
  #8  
Old April 26th 18, 01:12 AM posted to rec.bicycles.tech
John B.[_3_]
external usenet poster
 
Posts: 5,697
Default Dry lube?

On Wed, 25 Apr 2018 08:54:51 -0000 (UTC), Tanguy Ortolo
wrote:

One other thing, I have seen suggestions of lubricating only the chain,
and not the sprockets and derailleur. However, I think the derailleur
sprockets still need some lubrication to roll with few friction, do they
not?


If you lube the chain (with whatever) some of that lube will be
transferred to the sprockets. For proof simply handle a newly lubed
chain :-)


--
Cheers,

John B.

  #9  
Old April 26th 18, 12:55 AM posted to rec.bicycles.tech
James[_8_]
external usenet poster
 
Posts: 6,153
Default Dry lube?

On 24/04/18 19:06, Tanguy Ortolo wrote:
Dear cyclists,

After years using wet lubes in all conditions (currently, a specific
chain oil with PTFE from 3in1
http://www.3-en-un.fr/produit/lubrifiant-chaines-et-cables-250ml/),
and being used to seing my chain getting very dirty, I have just learnt
that I may avoid this by using dry lube instead.

Actually, I have heard of one specific product, the Squirt dry lube
http://www.squirtlube.com/our-products/. It is about twice more
expensive than the lubricant I am currently using, but it is supposed to
reduce cleaning work, and if it does make the chain cleaner, it may as
well reduce its wear and extend its life.

So, have any of you tried that lubricant, or any other dry one? Would
you recommend it rather than wet lubes? My most important usage is a
daily commuting through suburb streets and forest paths (in all weather
conditions, therfore quite muddy when it rains, but now that summer is
coming, it is going to be rather dry).


Like Frank said, wax alone allows and the chain will squeak sooner
rather than later. I use much more oil than Frank though, about 50/50
candle wax and EP gear oil. Paraffin oil is also apparently quite good.

My mixture cost me sweet F.A., and lasts at least 1000km between
applications including some wet rides. Heat the mix in an old cooking
pot until it is liquid and immerse the chain. Use a Connex quick link
for convenience.

Ok, you might get a little black on your fingers to put a dropped chain
back on, but the chain, chain rings, cassette and jockey wheels don't
get gummed up with thick hardened crud either.

It's the best of three worlds.
1/ Long chain life.
2/ Low maintenance.
3/ Low cost.

--
JS
  #10  
Old April 26th 18, 04:14 AM posted to rec.bicycles.tech
John B.[_3_]
external usenet poster
 
Posts: 5,697
Default Dry lube?

On Thu, 26 Apr 2018 09:55:06 +1000, James
wrote:

On 24/04/18 19:06, Tanguy Ortolo wrote:
Dear cyclists,

After years using wet lubes in all conditions (currently, a specific
chain oil with PTFE from 3in1
http://www.3-en-un.fr/produit/lubrifiant-chaines-et-cables-250ml/),
and being used to seing my chain getting very dirty, I have just learnt
that I may avoid this by using dry lube instead.

Actually, I have heard of one specific product, the Squirt dry lube
http://www.squirtlube.com/our-products/. It is about twice more
expensive than the lubricant I am currently using, but it is supposed to
reduce cleaning work, and if it does make the chain cleaner, it may as
well reduce its wear and extend its life.

So, have any of you tried that lubricant, or any other dry one? Would
you recommend it rather than wet lubes? My most important usage is a
daily commuting through suburb streets and forest paths (in all weather
conditions, therfore quite muddy when it rains, but now that summer is
coming, it is going to be rather dry).


Like Frank said, wax alone allows and the chain will squeak sooner
rather than later. I use much more oil than Frank though, about 50/50
candle wax and EP gear oil. Paraffin oil is also apparently quite good.

My mixture cost me sweet F.A., and lasts at least 1000km between
applications including some wet rides. Heat the mix in an old cooking
pot until it is liquid and immerse the chain. Use a Connex quick link
for convenience.

Ok, you might get a little black on your fingers to put a dropped chain
back on, but the chain, chain rings, cassette and jockey wheels don't
get gummed up with thick hardened crud either.

It's the best of three worlds.
1/ Long chain life.
2/ Low maintenance.
3/ Low cost.


What is the consistency of your oil/wax mixture at room temperature?

I've been using a bee's wax/paraffin/grease mixture that when hardened
feels greaseless.

The bee's wax addition came about simply because the shop where I
bought the paraffin wax had some bee's wax and I thought "why not",
although it was about double the paraffin cost. It does make the wax
mixture a bit softer though.



--
Cheers,

John B.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
To Lube Or Not To Lube Shifter Cables That is the Question! [email protected] Techniques 3 June 11th 06 01:24 AM
To Lube Or Not To Lube Shifter Cables That is the Question! MykalCrooks Techniques 1 June 9th 06 06:48 AM
To Lube Or Not To Lube Shifter Cables That is the Question! Chris M Techniques 2 June 9th 06 01:30 AM
To Lube Or Not To Lube Shifter Cables That is the Question! Qui si parla Campagnolo Techniques 0 June 8th 06 09:05 PM
To Lube Or Not To Lube Shifter Cables That is the Question! [email protected] Techniques 0 June 8th 06 08:50 PM


All times are GMT +1. The time now is 11:52 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.