|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Brand new broken Schlumpf
New Schlumpf? Borked or no, where do I get me one of those?? Bummer about your hub. I haven't heard about one of these cases not being resolved though. There is hope. Z -- boisei ------------------------------------------------------------------------ boisei's Profile: http://www.unicyclist.com/profile/16116 View this thread: http://www.unicyclist.com/thread/74504 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
Ads |
#12
|
|||
|
|||
Brand new broken Schlumpf
dude, that sucks I know your pain, my geared hub is in for repairs now too - mine took 6 months to break. ro -- rolandisimo ------------------------------------------------------------------------ rolandisimo's Profile: http://www.unicyclist.com/profile/13769 View this thread: http://www.unicyclist.com/thread/74504 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#13
|
|||
|
|||
Brand new broken Schlumpf
Hello Perry, That is a horrible fail. If I see it right, looks like the end retaining the bearings is sheared off. In six days? Wow, what kind of riding encouraged this fail? It must be a defect. I hope it's a muni guni and it saw a good amount of action in those six (cold) days. Still, to cause a fail like this, you'd have to have more than blown out a few muscles or joints or your own in that period. If your right leg dominates your riding, was the fail on the right side of the uni, or what? I'm wondering if a fail like this indicates that the wheel build should prefer the clamped bearing be oppose of your dominant leg side of the uni to reduce the stress? Not sure it would matter. Hope the repair comes swiftly. -- Chrashing Regards, Ken I've been flying....... ------------------------------------------------------------------------ Chrashing's Profile: http://www.unicyclist.com/profile/7501 View this thread: http://www.unicyclist.com/thread/74504 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#14
|
|||
|
|||
Brand new broken Schlumpf
Hmm, I was just going to order one of those sexy hubs. And I think I will anyways, it doesn't seem to be a very common thing to happen. What frame is it exactly that you had it in? -- munirocks mono for bono ------------------------------------------------------------------------ munirocks's Profile: http://www.unicyclist.com/profile/16564 View this thread: http://www.unicyclist.com/thread/74504 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#15
|
|||
|
|||
Brand new broken Schlumpf
rolandisimo;1139690 wrote: dude, that sucks I know your pain, my geared hub is in for repairs now too - mine took 6 months to break. ro I'm following all these threads of broken KH Schlumpf hubs and wonderiong if . . . . it is worth it all. I like to go fast and far like the rest of us, but seems to negate one of the unicycles major attributes: simplicity. Ok, so if I have a broken one, I'm gathering that to send the broken hub to Europe for repairs, one has to remove it from the wheel first. . unlacing the spokes, yes?? I guess that means that the two skills of GUNI riding and wheel building are linked if you have one of these hubs. Too bad there isn't some way to develop local (USA) expertise and basic parts and service right here without having to go to Europe. . . I suppose this is the curse of having such a tiny worldwide market that is interested in this product. Not that I want this to happen, but at what point does Florian get tired of repairing all these hubs and decide to redesign them or quit making them? That said, I still really want one. B -- brycer1968 ------------------------------------------------------------------------ brycer1968's Profile: http://www.unicyclist.com/profile/11311 View this thread: http://www.unicyclist.com/thread/74504 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#16
|
|||
|
|||
Brand new broken Schlumpf
Aw, Perry, that sux. I think I've at least got the record for most repairs (it's only 2, but has anyone else had to send back two hubs for repairs?). The good news is that Florian is really great about fixing hubs when they turn evil. The bad news is that you still have to ship the damn thing back to Switzerland. It's not like that's cheap in and of itself. And taking apart the hub, etc -- what a pain (I know! Really I do). I'm glad that you didn't get hurt as a result of a catastrophic fall from the gears messing up. I've had a few such falls and will not ride a guni sans helmet, even in low gear. Why take the risk? I hope you get the replacement hub fast! (I accidentally typed 'hug' in the previous sentence. I hope you get a lot of hugs, too. You know I'm good for one.) -- David_Stone Dictator for Life, NYUC Check out my blog (or else): http://newyorkunicycle.blogspot.com/ ------------------------------------------------------------------------ David_Stone's Profile: http://www.unicyclist.com/profile/3834 View this thread: http://www.unicyclist.com/thread/74504 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#17
|
|||
|
|||
Brand new broken Schlumpf
David_Stone;1140007 wrote: Aw, Perry, that sux. I think I've at least got the record for most repairs (it's only 2, but has anyone else had to send back two hubs for repairs?). The good news is that Florian is really great about fixing hubs when they turn evil. The bad news is that you still have to ship the damn thing back to Switzerland. It's not like that's cheap in and of itself. And taking apart the hub, etc -- what a pain (I know! Really I do). I'm glad that you didn't get hurt as a result of a catastrophic fall from the gears messing up. I've had a few such falls and will not ride a guni sans helmet, even in low gear. Why take the risk? I hope you get the replacement hub fast! (I accidentally typed 'hug' in the previous sentence. I hope you get a lot of hugs, too. You know I'm good for one.) I've broken my hub twice. Once before RTL my bearings failed and towards the end of the race my bearings were failing again. I sent my hub Back right after the race and I haven't gotten it back yet. So far, the repair turn around has been unfortunately slow, but I bet florian has been really busy. Kevins hub failed in the same way as this one while in a standard kh frame, so there may still be a design problem that needs to be worked out. Corbin -- corbin http://www.corbinstreehouse.com ------------------------------------------------------------------------ corbin's Profile: http://www.unicyclist.com/profile/7561 View this thread: http://www.unicyclist.com/thread/74504 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#18
|
|||
|
|||
Brand new broken Schlumpf
Any update on this? I am curious as to what the problem was. -- siafirede 'DCuni' (http://www.dcuni.com/blog) - my blog about Unicycling in Washington DC, Virginia, Maryland *James* = my name ------------------------------------------------------------------------ siafirede's Profile: http://www.unicyclist.com/profile/6057 View this thread: http://www.unicyclist.com/thread/74504 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#19
|
|||
|
|||
Brand new broken Schlumpf
siafirede;1145573 wrote: Any update on this? I am curious as to what the problem was. me too. -- munirocks mono for bono ------------------------------------------------------------------------ munirocks's Profile: http://www.unicyclist.com/profile/16564 View this thread: http://www.unicyclist.com/thread/74504 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#20
|
|||
|
|||
Brand new broken Schlumpf
I sent the hub back to Florian last week, but I haven't heard anything yet. Based on the pictures, he said it appears the large diameter bearings had completely disintegrated. I'll keep everybody posted. -- capuni My 'Ride The Lobster Photo Album' (http://gallery.mac.com/perrywoodin#100208) ------------------------------------------------------------------------ capuni's Profile: http://www.unicyclist.com/profile/15514 View this thread: http://www.unicyclist.com/thread/74504 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Broken KH/Schlumpf hub | johnfoss | Unicycling | 0 | June 5th 08 09:00 PM |
Broken KH/Schlumpf hub | mscalisi | Unicycling | 2 | June 5th 08 01:16 AM |
Broken KH/Schlumpf hub | unicycle6869 | Unicycling | 0 | June 4th 08 09:48 PM |
Broken KH/Schlumpf hub | pedrotejada | Unicycling | 0 | June 4th 08 08:33 PM |
Broken KH/Schlumpf hub | joemarshall | Unicycling | 10 | June 4th 08 08:20 PM |