#21
|
|||
|
|||
Wheel drag
Scott wrote: Francesco Devittori wrote: wrote: [...] Clothes is pretty straight forward. Tight with no flapping. Helmets is a more difficult propoosition. Any suggestions? It has to be something that can be worn for 20 hours and not be a waste when I'm fried and keep looking down, unable to look straight ahead the whole time. I'll probably stick with my normal LAS. Joseph From http://www.pezcyclingnews.com/?pg=fullstory&id=3574 "Most think that the frame matters the most, wheels next, and helmet last. Some even think that the components come before the helmet. In reality, a well designed aero-helmet will save you more time (power) than anything else. The drag difference between a vented road helmet and an aero-helmet is 2-4 times larger than the difference between a good aero-wheelset and a 32-spoked wheelset." Maybe looking for a more aero helmet could be worth it in your case. Francesco That article doesn't really apply to the typical rider. They're talking about minimizing drag on a pro cyclist that has the benefit of wind tunnel testing and R&D to design a helmet to fit the specific rider's profile. Any 'off the shelf' aero helmet will have almost no appreciable gain for the typical rider not riding in his optimal aero position, and will likely be very poorly ventilated as well. That's what I'm worried about. Gain 2 seconds while sitting just right, then lose 5 seconds when I look down from exhaustion. Since it is usually pretty cold, ventilation isn't too big an issue. Looking like an idiot getting passed by hundreds of people at the end while wearing an aero helmet wouldn't be too satisfying either... Joseph |
Ads |
#23
|
|||
|
|||
Wheel drag
Ron Ruff wrote: wrote: Ron Ruff wrote: If you have a strong cross wind you should be in a series of double echelons, then. One of the problems is that our group is from a wide geographic area which makes practicing as a complete group difficult to arrange. You can all practice the basic technique if you can get a couple of other guys together. The speed difference is huge... if you expect any crosswinds it would be a bad idea to avoid this. Heck, with 20-30 guys you don't need much of a side wind before you'd be stretched out across the lane. Teamwork is key if you desire a good result. This is one of those things that can be practiced in theory, but when the time comes could backfire bigtime, with lots of wasted effort, shouting, etc. It will be dicussed at some of the winter meetings, and if we can do it successfully in one of the warm-up rides, it may be an option during the real event. Clothes is pretty straight forward. Tight with no flapping. Skinsuit, arm and shoe covers. The weather is often cold, so arm and shoe covers are there anyway. Most folks will have long pants too, at least for aprt of the ride. Rain gear too. I'm amazed at how much ill-fitting rain gear you see people using. Helmets is a more difficult propoosition. Any suggestions? It has to be something that can be worn for 20 hours and not be a waste when I'm fried and keep looking down, unable to look straight ahead the whole time. I'll probably stick with my normal LAS. One like this might be helpful: http://www.performancebike.com/shop/...tegory_ID=4210 That looks pretty good. Not too agressive. Also... if you are too big to be blown around... lose some weight! That will help more than anything on the climbs. Losing weight is on the program! But I'll never be under 95kg which will keep we well anchored (in more ways than one!) BTW... how can the first 3rd of a 250km+ race be a climb?... and then the next 3rd is flat? Is that a half percent grade or something? The first 1/3 isn't a climb, but it is "mostly up". The 540km has 4,400m of total ascent. The high point is about 1,000 meters 150km into the ride, by which time at least half of the 4,400m has been climbed. It is on a major road that is well graded with no significant sections more than say 3-4%, usually less. All the 250km races are more or less flat with at most a few 5 km climbs. One of the shorter prep rides has a climb about 10km of 6% which kills me. I will be very surprised if I hang with the group on that ride. Joseph |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Development of the the wire-spoked wheel | [email protected] | Techniques | 14 | July 23rd 05 06:57 PM |
A little progress report and some questions... | tylercox | Unicycling | 5 | April 9th 05 04:08 AM |
The Basics of Wheel Alignment and Wheelbuilding | Jeff Napier | Techniques | 338 | August 23rd 04 09:17 PM |
Wheelbuilding issues | Nate Knutson | Techniques | 13 | May 9th 04 03:29 PM |
Custom 24" MTB wheel with Hugi 240 hub (with 2 tires) - New | IronDad | Marketplace | 1 | April 13th 04 06:19 PM |