|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
threaded fork sizing?
I've got a ~2000 Bianchi Campione and I'm wanting to upgrade the fork to
something carbon. There are threaded carbon forks out there, but as I was talking to an LBS guy, I started to question whether my headset is 1" threaded (as I understand as "standard") or possibly 1 1/8" threaded. Using an unscientific ruler, I determined that the quill size (standard Bianchi-branded ITM: http://store.bianchiusa.com/store/im...tems/E3112.jpg) is less than 1", but that the outside diameter of the fork steerer, as measurered by eye from above the upper nut of the headset, seems to be 1 1/8". I found something that says "take the diameter of the quill and add 1/8", but that just puts me at about 1 1/16! The headset is a Shimano 105, if that makes a difference. I'm really just looking for some kind of explanation or clues on what to look at. I'd imagine if 1 1/8" threaded steerers are rare that that might be good enough to know, or I could just take the dang bike down to the shop and have them tell me. But in true Usenet fashion I submit to the great unknown first. -e |
Ads |
#2
|
|||
|
|||
threaded fork sizing?
Eric Hill wrote:
I've got a ~2000 Bianchi Campione and I'm wanting to upgrade the fork to something carbon. There are threaded carbon forks out there, but as I was talking to an LBS guy, I started to question whether my headset is 1" threaded (as I understand as "standard") or possibly 1 1/8" threaded. Using an unscientific ruler, I determined that the quill size (standard Bianchi-branded ITM: http://store.bianchiusa.com/store/im...tems/E3112.jpg) is less than 1", but that the outside diameter of the fork steerer, as measurered by eye from above the upper nut of the headset, seems to be 1 1/8". I found something that says "take the diameter of the quill and add 1/8", but that just puts me at about 1 1/16! The headset is a Shimano 105, if that makes a difference. I'm really just looking for some kind of explanation or clues on what to look at. I'd imagine if 1 1/8" threaded steerers are rare that that might be good enough to know, or I could just take the dang bike down to the shop and have them tell me. But in true Usenet fashion I submit to the great unknown first. If you measure your quill stem where it enters the headset, it will be 22.2 mm. Use a set of vernier calipers. The outside of the fork steerer will be 25.4 mm. 3.2 mm difference. Roughly 1/8" (25.4mm per inch / 8 = 3.175) Threaded 1.125" forks are rare. Especially on road bicycles. I doubt if Shimano ever made a threaded 1.125" headset. |
#3
|
|||
|
|||
threaded fork sizing?
|
#4
|
|||
|
|||
threaded fork sizing?
Dave Thompson wrote:
wrote: snip I doubt if Shimano ever made a threaded 1.125" headset. They didn't. The 105 headset is 1". Perfect, guys. Thanks. -eric |
#5
|
|||
|
|||
threaded fork sizing?
Eric Hill wrote:
I've got a ~2000 Bianchi Campione and I'm wanting to upgrade the fork to something carbon. There are threaded carbon forks out there, but as I was talking to an LBS guy, I started to question whether my headset is 1" threaded (as I understand as "standard") or possibly 1 1/8" threaded. Using an unscientific ruler, I determined that the quill size (standard Bianchi-branded ITM: http://store.bianchiusa.com/store/im...tems/E3112.jpg) is less than 1", but that the outside diameter of the fork steerer, as measurered by eye from above the upper nut of the headset, seems to be 1 1/8". I found something that says "take the diameter of the quill and add 1/8", but that just puts me at about 1 1/16! The headset is a Shimano 105, if that makes a difference. I'm really just looking for some kind of explanation or clues on what to look at. I'd imagine if 1 1/8" threaded steerers are rare that that might be good enough to know, or I could just take the dang bike down to the shop and have them tell me. But in true Usenet fashion I submit to the great unknown first. Unless you love the look of a quill stem, go threadless. You'll need a new stem and headset, but this seems like the ideal opportunity to upgrade. Decent quill stems are getting rare - especially if you want a black one - and one day you'll need to replace yours. |
#6
|
|||
|
|||
threaded fork sizing?
Zog The Undeniable wrote:
Unless you love the look of a quill stem, go threadless. You'll need a new stem and headset, but this seems like the ideal opportunity to upgrade. Decent quill stems are getting rare - especially if you want a black one - and one day you'll need to replace yours. I've actually read and thought about this a bit and am not convinced that it's actually qualifies as an upgrade. -eric |
#7
|
|||
|
|||
threaded fork sizing?
They certainly did
See http://www.sjscycles.com/store/vIndex.htm?cat584.htm for examples. Andrew Webster |
#8
|
|||
|
|||
threaded fork sizing?
Eric Hill wrote:
Zog The Undeniable wrote: Unless you love the look of a quill stem, go threadless. You'll need a new stem and headset, but this seems like the ideal opportunity to upgrade. Decent quill stems are getting rare - especially if you want a black one - and one day you'll need to replace yours. I've actually read and thought about this a bit and am not convinced that it's actually qualifies as an upgrade. -eric All things considered, the same could be said about replacing a good steel fork with the latest-and-greatest carbon model. |
#9
|
|||
|
|||
threaded fork sizing?
On 16 Jul 2005 16:28:49 -0700, "
wrote: Eric Hill wrote: I've actually read and thought about this a bit and am not convinced that it's actually qualifies as an upgrade. -eric All things considered, the same could be said about replacing a good steel fork with the latest-and-greatest carbon model. Why? Carbon forks are strong and lighter. JT **************************** Remove "remove" to reply Visit http://www.jt10000.com **************************** |
#10
|
|||
|
|||
threaded fork sizing?
John Forrest Tomlinson wrote:
On 16 Jul 2005 16:28:49 -0700, " wrote: Eric Hill wrote: I've actually read and thought about this a bit and am not convinced that it's actually qualifies as an upgrade. -eric All things considered, the same could be said about replacing a good steel fork with the latest-and-greatest carbon model. Why? Carbon forks are strong and lighter. Yeah. To be sure, and I don't think I mentioned this in my original post, my idea here is to shave some weight until I buy a new bike in a year or so. Now, to track down that Bianchi threaded carbon fork they made a few years back! -eric |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Changing RANS threaded fork to threadless | [email protected] | Recumbent Biking | 2 | May 22nd 05 07:32 PM |
Rec.Bicycles Frequently Asked Questions Posting Part 1/5 | Mike Iglesias | General | 4 | October 29th 04 07:11 AM |
Columbus Muscle fork: Feedback Please | Rik O'Shea | Techniques | 12 | December 28th 03 04:32 AM |
1" threaded Carbon fork WANTED!!! | moodmanBiker | Marketplace | 1 | September 14th 03 12:43 PM |
FS: Kinesis Carbon 3 Fork 1" threaded | Daniel Mendoza | Marketplace | 0 | August 6th 03 10:39 PM |