#1
|
|||
|
|||
nifty multitool
Fits into the hollow axes of the GRX crankset and is held by a magnet:
https://photos.app.goo.gl/hJcKwKxXXKRo6eyS9 https://photos.app.goo.gl/sSganYNLo3a5R3SG6 Lou |
Ads |
#2
|
|||
|
|||
nifty multitool
On 7/1/2020 10:57 AM, Lou Holtman wrote:
Fits into the hollow axes of the GRX crankset and is held by a magnet: https://photos.app.goo.gl/hJcKwKxXXKRo6eyS9 https://photos.app.goo.gl/sSganYNLo3a5R3SG6 Lou https://www.allinmultitool.com/ |
#3
|
|||
|
|||
nifty multitool
On Wed, 1 Jul 2020 10:57:13 -0700 (PDT), Lou Holtman
wrote: Fits into the hollow axes of the GRX crankset and is held by a magnet: https://photos.app.goo.gl/hJcKwKxXXKRo6eyS9 https://photos.app.goo.gl/sSganYNLo3a5R3SG6 Lou Nice: https://www.allinmultitool.com https://www.singletracks.com/mtb-gear/multitool-fits-inside-crank-spindle-adds-bike-chain-breaker/ 68 Euros. -- Jeff Liebermann 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558 |
#4
|
|||
|
|||
nifty multitool
On 7/1/2020 11:33 PM, Jeff Liebermann wrote:
On Wed, 1 Jul 2020 10:57:13 -0700 (PDT), Lou Holtman wrote: Fits into the hollow axes of the GRX crankset and is held by a magnet: https://photos.app.goo.gl/hJcKwKxXXKRo6eyS9 https://photos.app.goo.gl/sSganYNLo3a5R3SG6 Lou Nice: https://www.allinmultitool.com https://www.singletracks.com/mtb-gear/multitool-fits-inside-crank-spindle-adds-bike-chain-breaker/ 68 Euros. I admit it's cute. But it seems like you can get a multi-tool that's even more effective for half the price if you're willing to keep it in a gasp! bike bag. And the bike bag version won't slow you down with eddy current losses due to the cute one's magnets. ;-) -- - Frank Krygowski |
#5
|
|||
|
|||
nifty multitool
On Thu, 2 Jul 2020 11:23:43 -0400, Frank Krygowski
wrote: On 7/1/2020 11:33 PM, Jeff Liebermann wrote: On Wed, 1 Jul 2020 10:57:13 -0700 (PDT), Lou Holtman wrote: Fits into the hollow axes of the GRX crankset and is held by a magnet: https://photos.app.goo.gl/hJcKwKxXXKRo6eyS9 https://photos.app.goo.gl/sSganYNLo3a5R3SG6 Lou Nice: https://www.allinmultitool.com https://www.singletracks.com/mtb-gear/multitool-fits-inside-crank-spindle-adds-bike-chain-breaker/ 68 Euros. I admit it's cute. But it seems like you can get a multi-tool that's even more effective for half the price if you're willing to keep it in a gasp! bike bag. Yep, truly horrible. Think of the aerodynamic drag and added grams of weight caused by the bag. Mounted to the frame, it might affect the glossy finish required to maintain laminar air flow. However, none of that is as serious as the lack of security for the tool. There's nothing to keep anyone from walking by, seeing the unique logo, and simply pulling on the cover to remove a 68 Euro tool held in only by magnets. If locking proves difficult, perhaps the "pro" model will include a pepper spray in your face dispenser? And the bike bag version won't slow you down with eddy current losses due to the cute one's magnets. ;-) Ummm... the retention magnets rotate along with the steel spindle. Everything else is aluminum, carbon fiber, or wood, none of which are affected by magnetic fields. Actually, you can use eddy currents through an aluminum disc for magnetic braking but it takes a much larger magnet: https://en.wikipedia.org/wiki/Eddy_current_brake Cute does sell some products. Think of it as "giftware". -- Jeff Liebermann 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558 |
#6
|
|||
|
|||
nifty multitool
On 7/2/2020 12:46 PM, Jeff Liebermann wrote:
On Thu, 2 Jul 2020 11:23:43 -0400, Frank Krygowski wrote: On 7/1/2020 11:33 PM, Jeff Liebermann wrote: On Wed, 1 Jul 2020 10:57:13 -0700 (PDT), Lou Holtman wrote: Fits into the hollow axes of the GRX crankset and is held by a magnet: https://photos.app.goo.gl/hJcKwKxXXKRo6eyS9 https://photos.app.goo.gl/sSganYNLo3a5R3SG6 Lou Nice: https://www.allinmultitool.com https://www.singletracks.com/mtb-gear/multitool-fits-inside-crank-spindle-adds-bike-chain-breaker/ 68 Euros. I admit it's cute. But it seems like you can get a multi-tool that's even more effective for half the price if you're willing to keep it in a gasp! bike bag. Yep, truly horrible. Think of the aerodynamic drag and added grams of weight caused by the bag. Mounted to the frame, it might affect the glossy finish required to maintain laminar air flow. However, none of that is as serious as the lack of security for the tool. There's nothing to keep anyone from walking by, seeing the unique logo, and simply pulling on the cover to remove a 68 Euro tool held in only by magnets. If locking proves difficult, perhaps the "pro" model will include a pepper spray in your face dispenser? And the bike bag version won't slow you down with eddy current losses due to the cute one's magnets. ;-) Ummm... the retention magnets rotate along with the steel spindle. Everything else is aluminum, carbon fiber, or wood, none of which are affected by magnetic fields. Actually, you can use eddy currents through an aluminum disc for magnetic braking but it takes a much larger magnet: https://en.wikipedia.org/wiki/Eddy_current_brake Well, as a cute science demo for a young physics major who was visiting, I took a high strength magnet about 5mm diameter by 15mm long and dropped it down an aluminum tube about 10mm ID and a meter long. It fell very, very slowly. (Try it. It's fun!) Her father is a very smart electrical engineer, but neither of them understood what was happening. My point? Eddy currents work well with aluminum. (I don't know about carbon fiber.) If you have an aluminum frame and this toolkit, your only hope is that the steel spindle will shield the magnetic fields from the aluminum. Otherwise, this braking effect might be enough to overcome the advantage of even red paint. And as we know, with bicycling, every dyne matters; nothing is negligible! -- - Frank Krygowski |
#7
|
|||
|
|||
nifty multitool
On 7/2/2020 10:44 AM, Frank Krygowski wrote:
On 7/2/2020 12:46 PM, Jeff Liebermann wrote: On Thu, 2 Jul 2020 11:23:43 -0400, Frank Krygowski wrote: On 7/1/2020 11:33 PM, Jeff Liebermann wrote: On Wed, 1 Jul 2020 10:57:13 -0700 (PDT), Lou Holtman wrote: Fits into the hollow axes of the GRX crankset and is held by a magnet: https://photos.app.goo.gl/hJcKwKxXXKRo6eyS9 https://photos.app.goo.gl/sSganYNLo3a5R3SG6 Lou Nice: https://www.allinmultitool.com https://www.singletracks.com/mtb-gear/multitool-fits-inside-crank-spindle-adds-bike-chain-breaker/ 68 Euros. I admit it's cute. But it seems like you can get a multi-tool that's even more effective for half the price if you're willing to keep it in a gasp! bike bag. Yep, truly horrible.Â* Think of the aerodynamic drag and added grams of weight caused by the bag.Â* Mounted to the frame, it might affect the glossy finish required to maintain laminar air flow.Â* However, none of that is as serious as the lack of security for the tool.Â* There's nothing to keep anyone from walking by, seeing the unique logo, and simply pulling on the cover to remove a 68 Euro tool held in only by magnets.Â* If locking proves difficult, perhaps the "pro" model will include a pepper spray in your face dispenser? And the bike bag version won't slow you down with eddy current losses due to the cute one's magnets.Â*Â*Â* ;-) Ummm... the retention magnets rotate along with the steel spindle. Everything else is aluminum, carbon fiber, or wood, none of which are affected by magnetic fields.Â* Actually, you can use eddy currents through an aluminum disc for magnetic braking but it takes a much larger magnet: https://en.wikipedia.org/wiki/Eddy_current_brake Well, as a cute science demo for a young physics major who was visiting, I took a high strength magnet about 5mm diameter by 15mm long and dropped it down an aluminum tube about 10mm ID and a meter long. It fell very, very slowly. (Try it. It's fun!) Her father is a very smart electrical engineer, but neither of them understood what was happening. My point? Eddy currents work well with aluminum. (I don't know about carbon fiber.) If you have an aluminum frame and this toolkit, your only hope is that the steel spindle will shield the magnetic fields from the aluminum. Doesn't the spindle completely shield everything outside the spindle from the magnetic fields? (Serious question, but I thought it did.) Mark J. |
#8
|
|||
|
|||
nifty multitool
On Thu, 2 Jul 2020 13:44:59 -0400, Frank Krygowski
wrote: On 7/2/2020 12:46 PM, Jeff Liebermann wrote: On Thu, 2 Jul 2020 11:23:43 -0400, Frank Krygowski wrote: Ummm... the retention magnets rotate along with the steel spindle. Everything else is aluminum, carbon fiber, or wood, none of which are affected by magnetic fields. Actually, you can use eddy currents through an aluminum disc for magnetic braking but it takes a much larger magnet: https://en.wikipedia.org/wiki/Eddy_current_brake Well, as a cute science demo for a young physics major who was visiting, I took a high strength magnet about 5mm diameter by 15mm long and dropped it down an aluminum tube about 10mm ID and a meter long. It fell very, very slowly. (Try it. It's fun!) Nice, but I couldn't find a suitable magnet. I think a salvaged loudspeaker magnet might work if I can find one. All my neodymium magnets are in the form of salvaged hard disk drive magnets. Her father is a very smart electrical engineer, but neither of them understood what was happening. My point? Eddy currents work well with aluminum. (I don't know about carbon fiber.) If you have an aluminum frame and this toolkit, your only hope is that the steel spindle will shield the magnetic fields from the aluminum. It should work with any conductive material. The moving magnet sets up a reflected magnetic field with the same polarity in the aluminum tube. Like poles (and polarities) repel. The repulsive force opposes the motion of the magnet, so it slows down. The water is mildly conductive and can support a magnetic field sufficient to support mouse in a very strong magnetic field: https://phys.org/news/2009-09-mice-levitated-space.html https://www.improbable.com/2009/10/22/mice-levitated-in-lab/ I suppose if it works for a mouse, it might work for carbon fiber. Otherwise, this braking effect might be enough to overcome the advantage of even red paint. And as we know, with bicycling, every dyne matters; nothing is negligible! Since the sum of all the things deemed negligible often approaches the whole, discounting negligible effects might not be a good idea. At some point, we will probably need to consider quantum effects in bicycle performance. -- Jeff Liebermann 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558 |
#9
|
|||
|
|||
nifty multitool
On Friday, July 3, 2020 at 5:56:11 AM UTC+1, Jeff Liebermann wrote:
At some point, we will probably need to consider quantum effects in bicycle performance. I'm not worried. As a novelist and an economist, never mind a psychologist, both of the latter where I practiced them statistical arts with a tenuous relationship to hard mathematics, I've spent my life dealing with matters which can simultaneously be both true and untrue so that the tiniest margin of truth can make billions of difference at yearend audit. But I feel sorry for engineers, who have on the whole been taught that there are always hard numbers which mean only one thing at a time -- or even forever. Andre Jute Compare when I did my conscript military service in intelligence, where almost all the facts are deliberately made untrue by your enemies and you must find the single indicative fact that is important enough to act on or, in that wilderness of mirrors, deliberately not to act on because you don't want the guys opposite to discover they didn't baffle you; a field of fools' gold in which the greater the benefit of some "fact" to your side, the greater the risk that the benefit, even if it the fact is objectively true, to the other side will be greater. Zero sum games are the greatest psychosis one can imagine. |
#10
|
|||
|
|||
nifty multitool
On Wednesday, July 1, 2020 at 8:34:04 PM UTC-7, Jeff Liebermann wrote:
On Wed, 1 Jul 2020 10:57:13 -0700 (PDT), Lou Holtman wrote: Fits into the hollow axes of the GRX crankset and is held by a magnet: https://photos.app.goo.gl/hJcKwKxXXKRo6eyS9 https://photos.app.goo.gl/sSganYNLo3a5R3SG6 Lou Nice: https://www.allinmultitool.com https://www.singletracks.com/mtb-gear/multitool-fits-inside-crank-spindle-adds-bike-chain-breaker/ 68 Euros. -- Jeff Liebermann 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558 Having ridden a great deal of gravel in my time I can't figure out why the GRX cranks would be set-up for cyclocross rather than gravel. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Favorite multitool | DeF | Australia | 1 | April 17th 07 07:34 AM |
nifty LED pedals | phlegm | Unicycling | 21 | September 11th 05 11:05 PM |
Multitool wanted - Socket/spanner type | Random | UK | 9 | May 16th 05 01:47 PM |
OT nifty album software | Penny S | Mountain Biking | 1 | March 22nd 04 12:16 PM |
Nifty gadget | Doesnotcompute | UK | 2 | August 19th 03 10:35 AM |