A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Techniques
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Towing carbon-frame bicycles?



 
 
Thread Tools Display Modes
  #1  
Old August 19th 17, 07:51 PM posted to rec.bicycles.tech
Joerg[_2_]
external usenet poster
 
Posts: 6,016
Default Towing carbon-frame bicycles?

It rarely happens but I have towed bicycles on occasion when a chain was
irreparably pretzeled or the derailer had snapped. Or as "power assist"
when a rider plain ran out of steam. I carry a towing rope in the left
pannier. It doubles as a tie down rope for bulky loads and to tie down
the bike in the bed of a pickup truck.

Now that many bikes have fancy carbon frames this brings up the question
whether one can still tie the towing rope to the head tube. Or is that
now too sensitive and it is better to wrap it somewhere around the stem
area?

--
Regards, Joerg

http://www.analogconsultants.com/
Ads
  #2  
Old August 19th 17, 08:02 PM posted to rec.bicycles.tech
AMuzi
external usenet poster
 
Posts: 13,447
Default Towing carbon-frame bicycles?

On 8/19/2017 1:51 PM, Joerg wrote:
It rarely happens but I have towed bicycles on occasion when
a chain was irreparably pretzeled or the derailer had
snapped. Or as "power assist" when a rider plain ran out of
steam. I carry a towing rope in the left pannier. It doubles
as a tie down rope for bulky loads and to tie down the bike
in the bed of a pickup truck.

Now that many bikes have fancy carbon frames this brings up
the question whether one can still tie the towing rope to
the head tube. Or is that now too sensitive and it is better
to wrap it somewhere around the stem area?


If it's deemed necessary for one reason or another, a better
idea may be to have the towed rider simply hold the end of
rope or cord. One might also simply ride along pushing the
rider's hip occasionally with one hand. I have seen some
ugly crashes on group rides over the years with a tethered
bicycle.

--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971


  #3  
Old August 19th 17, 08:28 PM posted to rec.bicycles.tech
Joerg[_2_]
external usenet poster
 
Posts: 6,016
Default Towing carbon-frame bicycles?

On 2017-08-19 12:02, AMuzi wrote:
On 8/19/2017 1:51 PM, Joerg wrote:
It rarely happens but I have towed bicycles on occasion when
a chain was irreparably pretzeled or the derailer had
snapped. Or as "power assist" when a rider plain ran out of
steam. I carry a towing rope in the left pannier. It doubles
as a tie down rope for bulky loads and to tie down the bike
in the bed of a pickup truck.

Now that many bikes have fancy carbon frames this brings up
the question whether one can still tie the towing rope to
the head tube. Or is that now too sensitive and it is better
to wrap it somewhere around the stem area?


If it's deemed necessary for one reason or another, a better idea may be
to have the towed rider simply hold the end of rope or cord. One might
also simply ride along pushing the rider's hip occasionally with one
hand. I have seen some ugly crashes on group rides over the years with a
tethered bicycle.


Holding is an option even on a road (side-by-side riding isn't) but it
means the other cyclist can't use the brakes well but he or she is going
to have to do most of the braking. As long as no slack is allowed in the
rope I found it to be fairly safe. It's mainly for long uphill slogs and
not at high speed.

https://www.youtube.com/watch?v=WFtJQpQlFss

Even motorcyclists do it. If the engine quits in the middle of nowhere
in Nevada it may be the only option.

https://www.youtube.com/watch?v=qmerGH5zkF4

The worst we've ever done as students was transporting a bed, as is,
over several miles. Strapped to the rack of my bike and tied to the
handlebar of the other cyclist's bike. Max pressure in the tires. We had
to cross the then still existing German-Dutch border which raised some
eyebrows among the guys in uniforms.

--
Regards, Joerg

http://www.analogconsultants.com/
  #4  
Old August 19th 17, 09:15 PM posted to rec.bicycles.tech
JBeattie
external usenet poster
 
Posts: 5,870
Default Towing carbon-frame bicycles?

On Saturday, August 19, 2017 at 11:51:07 AM UTC-7, Joerg wrote:
It rarely happens but I have towed bicycles on occasion when a chain was
irreparably pretzeled or the derailer had snapped. Or as "power assist"
when a rider plain ran out of steam. I carry a towing rope in the left
pannier. It doubles as a tie down rope for bulky loads and to tie down
the bike in the bed of a pickup truck.

Now that many bikes have fancy carbon frames this brings up the question
whether one can still tie the towing rope to the head tube. Or is that
now too sensitive and it is better to wrap it somewhere around the stem
area?

--
Regards, Joerg

http://www.analogconsultants.com/


Wow, is the tow rope in the pannier pocket next to the heart-lung machine, or is that in another pannier? I carry a full selection of shop tools, derailleur hangers, spokes, rims and a friction-drive motor, just in case the rider is tired or I can't completely repair the bike. https://www.electricbike.com/wp-cont...plerBike21.jpg I used to bring a granite surface plate and gas torch for fixing and truing steel frames, but most people are on aluminum or CF these days, at least back on the super-gnarly trails where I ride.

-- Jay Beattie





  #5  
Old August 20th 17, 09:53 AM posted to rec.bicycles.tech
Ned Mantei[_2_]
external usenet poster
 
Posts: 81
Default Towing carbon-frame bicycles?

On 19-08-17 22:15, jbeattie wrote:
Wow, is the tow rope in the pannier pocket next to the heart-lung machine, or is that in another pannier? I carry a full selection of shop tools, derailleur hangers, spokes, rims and a friction-drive motor, just in case the rider is tired or I can't completely repair the bike.https://www.electricbike.com/wp-cont...plerBike21.jpg I used to bring a granite surface plate and gas torch for fixing and truing steel frames, but most people are on aluminum or CF these days, at least back on the super-gnarly trails where I ride.


Eckart Heinrich has a web page (in German) with tales of his bike tours.
In one case he was in the Italian part of Switzerland and wanted to go
from Val Calanca to Val Blenio. Along the way he had to lower his bike
down a drop using a rope. So yes, a rope can be useful.

I carry a couple of meters of light climbing rope, which weighs almost
nothing. If I get stranded and have to spend the night somewhere up on a
mountain meadow, the rope and the emergency blanket could make for a
shelter. Also useful in case something breaks and needs to be tied in
place. A couple of months ago on a dirt road in Sardinia I gave the rope
to a guy on a motorbike for this reason.

Ned
  #6  
Old August 20th 17, 03:16 PM posted to rec.bicycles.tech
Joerg[_2_]
external usenet poster
 
Posts: 6,016
Default Towing carbon-frame bicycles?

On 2017-08-20 01:53, Ned Mantei wrote:
On 19-08-17 22:15, jbeattie wrote:
Wow, is the tow rope in the pannier pocket next to the heart-lung
machine, or is that in another pannier?



Underneath of the homemade Belgian Tripel that hitched a ride on Wednesday.


... I carry a full selection of
shop tools, derailleur hangers, spokes, rims and a friction-drive
motor, just in case the rider is tired or I can't completely repair
the
bike.https://www.electricbike.com/wp-cont...plerBike21.jpg
I used to bring a granite surface plate and gas torch for fixing and
truing steel frames, but most people are on aluminum or CF these days,
at least back on the super-gnarly trails where I ride.



Once when I came upon a stranded motorist and rolled out my tool kit he
was quite surprised. And we fixed his car.


Eckart Heinrich has a web page (in German) with tales of his bike tours.
In one case he was in the Italian part of Switzerland and wanted to go
from Val Calanca to Val Blenio. Along the way he had to lower his bike
down a drop using a rope. So yes, a rope can be useful.

I carry a couple of meters of light climbing rope, which weighs almost
nothing. If I get stranded and have to spend the night somewhere up on a
mountain meadow, the rope and the emergency blanket could make for a
shelter. Also useful in case something breaks and needs to be tied in
place. A couple of months ago on a dirt road in Sardinia I gave the rope
to a guy on a motorbike for this reason.


It is also really nice when picking up machine parts somewhere and the
box is bigger than anticipated. Or when a big package has to go to Fedex
but it's past the local pickup time.

--
Regards, Joerg

http://www.analogconsultants.com/
  #7  
Old August 21st 17, 05:35 PM posted to rec.bicycles.tech
Doug Landau
external usenet poster
 
Posts: 1,424
Default Towing carbon-frame bicycles?


Holding is an option even on a road (side-by-side riding isn't) but it
means the other cyclist can't use the brakes well but he or she is going
to have to do most of the braking.


The proper way is described here
http://www.cycleworld.com/2015/09/04...-safely#page-2

The rope goes around the bars and the gooseneck/tripleclamp/whatever and is held to the bars by one hand.

The rope has to be let-go-able.
  #8  
Old August 21st 17, 06:28 PM posted to rec.bicycles.tech
Joerg[_2_]
external usenet poster
 
Posts: 6,016
Default Towing carbon-frame bicycles?

On 2017-08-21 09:35, Doug Landau wrote:

Holding is an option even on a road (side-by-side riding isn't) but
it means the other cyclist can't use the brakes well but he or she
is going to have to do most of the braking.


The proper way is described here
http://www.cycleworld.com/2015/09/04...-safely#page-2


The method in the first picture is what the video I linked shows.


The rope goes around the bars and the gooseneck/tripleclamp/whatever
and is held to the bars by one hand.


On modern motorcycles that is often hardly possible anymore. Too much
stuff in the way. But on bicycles it works. Holding it by hand is iffy
because the trailing rider must do the braking.

My question was mainly because I don't know if a rope tied to the stem
could exert too much force in the top steerer bearing or into frame at
that spot when the disabled bike is CF. Going up a hill it can be a lot.
OTOH tying it around the head tube to might crush the head tube but I
don't know about that.


The rope has to be let-go-able.


Ideally, yes, but I never had any quick-release on mine. Once it gets
screwed up and tangled in a wheel it's almost too late anyhow.

--
Regards, Joerg

http://www.analogconsultants.com/
  #9  
Old August 21st 17, 09:53 PM posted to rec.bicycles.tech
Doug Landau
external usenet poster
 
Posts: 1,424
Default Towing carbon-frame bicycles?

On Monday, August 21, 2017 at 10:28:31 AM UTC-7, Joerg wrote:
On 2017-08-21 09:35, Doug Landau wrote:

Holding is an option even on a road (side-by-side riding isn't) but
it means the other cyclist can't use the brakes well but he or she
is going to have to do most of the braking.


The proper way is described here
http://www.cycleworld.com/2015/09/04...-safely#page-2


The method in the first picture is what the video I linked shows.


The rope goes around the bars and the gooseneck/tripleclamp/whatever
and is held to the bars by one hand.


On modern motorcycles that is often hardly possible anymore. Too much
stuff in the way. But on bicycles it works. Holding it by hand is iffy
because the trailing rider must do the braking.

My question was mainly because I don't know if a rope tied to the stem
could exert too much force in the top steerer bearing or into frame at
that spot when the disabled bike is CF. Going up a hill it can be a lot.
OTOH tying it around the head tube to might crush the head tube but I
don't know about that.


The rope has to be let-go-able.


Ideally, yes, but I never had any quick-release on mine. Once it gets
screwed up and tangled in a wheel it's almost too late anyhow.

--
Regards, Joerg

http://www.analogconsultants.com/


The rope HAS to be let-go-able
  #10  
Old August 21st 17, 10:18 PM posted to rec.bicycles.tech
Joerg[_2_]
external usenet poster
 
Posts: 6,016
Default Towing carbon-frame bicycles?

On 2017-08-21 13:53, Doug Landau wrote:
On Monday, August 21, 2017 at 10:28:31 AM UTC-7, Joerg wrote:
On 2017-08-21 09:35, Doug Landau wrote:


[...]

The rope has to be let-go-able.


Ideally, yes, but I never had any quick-release on mine. Once it gets
screwed up and tangled in a wheel it's almost too late anyhow.

--
Regards, Joerg

http://www.analogconsultants.com/


The rope HAS to be let-go-able


So far I have successfully completed all my tows by tying knots to my
bicycle and to the trailing bicycle. Some over lots of miles.

--
Regards, Joerg

http://www.analogconsultants.com/
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Towing bicycles Tom Crispin UK 19 December 11th 06 07:15 PM
FS: NEW 2006 Raleigh full carbon Team frame w/NEW Ritchey carbon fork [email protected] Marketplace 1 November 27th 06 01:09 AM
FA: 2003 GIANT TCR 0 CARBON FRAME, CARBON FORK, CARBON CAGES AND COMPUTER Phil, Squid-in-Training Marketplace 0 January 21st 05 04:07 PM
Orbea Lobular Carbon frame/Zeus FCM carbon fork/integrated headset Jonathan Page Marketplace 0 August 8th 04 08:49 PM
Steel Frame vs Aluminum Frame w/ Carbon seat stays and carbon fork ydm9 General 6 April 12th 04 09:42 PM


All times are GMT +1. The time now is 10:04 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.