Something I've been wondering about.

Last Sunday I was on my usual weekly "long ride" (which was hardly as
long as it used to be). And I was sort of looking down and the chain
was on the big chain ring and the 5th cassette sprocket (9 speed
cassette) and I got to thinking.

Note the friction losses for a chain drive are usually considered to
be very low, the usual efficiency of a chain drive is usually reckoned
to be "up to" 98%. But the instructions for installing a chain drive
is always to ensure that the drive and driven sprockets are exactly in
line.

But the conventional bicycle with it's multiple front and rear
sprockets does not have the sprockets aligned except in two instances,
assuming the usual chain line dimensions. When on the large front
chain ring and (usually) the center cassette sprocket on an uneven
numbered cassette, and when on the small front chain ring and a larger
cassette sprocket. Perhaps two sprockets larger than center.

So, if the usually chain efficiency figures are used the chain is
delivering the 98%+ efficiency only twice in a possible 18 speed
range.

What efficiency is being delivered during the periods when the chain
is not perfectly aligned?

And should one worry about it?


--
Cheers,
John B.