|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Bottom bracket replacement compatibility
I have an old 20.5" Raleigh MT-20 bike from the early/mid-90's with all
Altus C10 stuff on it. The bottom bracket is a Shimano BB-CS11 with the following markings on it: BB-CS11 Shimano Japan via 68 R3 BC 1.37x24 Spindle: D-EL the plastic cap is on the R side. I am trying to find a replacement and can't figure out what's compatible. Two local bike shops have given me two different answers. I have found a Shimano UN52 and a UN72 online that have similar (or the same) specs, but not sure if they'll work, party because they have the plastic cap on the right side, partly because I can't find any information about this BB. Thanks in advance for any advice you can provide. Jim |
Ads |
#2
|
|||
|
|||
On Wed, 10 Aug 2005 04:40:42 GMT, "Jim Dekan"
wrote: I have an old 20.5" Raleigh MT-20 bike from the early/mid-90's with all Altus C10 stuff on it. The bottom bracket is a Shimano BB-CS11 with the following markings on it: BB-CS11 Shimano Japan via 68 R3 BC 1.37x24 Spindle: D-EL the plastic cap is on the R side. Hi Jim It is an english thread (1.37x24 tpi) with 68 mm BB shell. Are you sure about the "R3" logo? it might be 103 mm spindle lenght, anyway you can measure it. If the spindle is square tapered it's easy to find a replacement by Shimano, you only have to ask for "English thread (1.37x24 tpi) 68 mm BB shell and spindle lenght in millimeters" it certainly will fit. Maurizio |
#3
|
|||
|
|||
Jim Dekan wrote: I have an old 20.5" Raleigh MT-20 bike from the early/mid-90's with all Altus C10 stuff on it. The bottom bracket is a Shimano BB-CS11 with the following markings on it: BB-CS11 Tourney BB in an Altus bike ... typical hidden down grade. Altus with the FC-CT92 or FC-CT91 crankset should have a BB-CT91 Bottom Bracket. The makings on it would have been YL116, that is a 116mm spindle with a 47.5mm chainline. Shimano Japan via 68 R3 BC 1.37x24 Spindle: D-EL Thats interesting, the listing for a BB-CS11 with the D-EL designation is 127.5mm spindle but with the 47.5 chainline ... measure the spindle to be sure. the plastic cap is on the R side. Matters not I am trying to find a replacement and can't figure out what's compatible. Two local bike shops have given me two different answers. They may both be right. I have found a Shimano UN52 and a UN72 online that have similar (or the same) specs, but not sure if they'll work, party because they have the plastic cap on the right side, Matters not. partly because I can't find any information about this BB. 1996/97 Dealer support Manual. R |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bottom bracket shell, head-tube tube, angles? | Simon Brooke | UK | 13 | June 3rd 05 06:19 PM |
Bottom bracket spindle length question | Bruce W.1 | Techniques | 7 | February 27th 05 01:41 AM |
Ultegra bottom bracket installation problem | Floyd Sense | Techniques | 1 | August 3rd 04 06:57 AM |
Campy front derailleur won't shift | Mike Lackey | Techniques | 6 | April 13th 04 02:05 PM |
Why "bottom bracket"? | 303squadron | General | 2 | September 27th 03 12:58 PM |