|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Do Shimano SPD road pedal clips fit on Mtn Bike shoes?
On Apr 26, 10:48*am, wrote:
I'm thinking of buying Shimano Ultegra PD-6620 SPD-SL Road Pedals... I’m wondering if the cleats will fit my shoes. *My shoes are diadora Mtn bike shoes (because I like to be able to walk off the bike) circa 1997, and have about 1.5 inch wide recessed area for the cleats. Can anyone tell me the dimensions of the PD-6620 cleats that come with the pedals, and if you know if they will fit shoes that have recessed cleats? If they will not fit my shoe, can you recommend a shoe that will allow me to walk and still use these pedals? No they will not. You need non pontooned shoes with the now standard 3 bolt, Look type pattern. |
Ads |
#12
|
|||
|
|||
Do Shimano SPD road pedal clips fit on Mtn Bike shoes?
In article
, "Qui si parla Campagnolo-www.vecchios.com" wrote: On Apr 26, 10:48*am, wrote: I'm thinking of buying Shimano Ultegra PD-6620 SPD-SL Road Pedals... I¹m wondering if the cleats will fit my shoes. *My shoes are diadora Mtn bike shoes (because I like to be able to walk off the bike) circa 1997, and have about 1.5 inch wide recessed area for the cleats. Can anyone tell me the dimensions of the PD-6620 cleats that come with the pedals, and if you know if they will fit shoes that have recessed cleats? If they will not fit my shoe, can you recommend a shoe that will allow me to walk and still use these pedals? No they will not. You need non pontooned shoes with the now standard 3 bolt, Look type pattern. The meta-question is why you bought SPD-SL pedals if you like to be able to walk off the bike. Dirty secret time: SPD is perfectly fine for most cyclists in most circumstances. I raced, with some success, on SPDs. The only reason I changed to Crank Brothers pedals (also walkable, of course) was because they're a little better for cyclocross (SPDs tend to get clogged up if you try walking through mud and then rapidly remounting your bike). -- Ryan Cousineau http://www.wiredcola.com/ "In other newsgroups, they killfile trolls." "In rec.bicycles.racing, we coach them." |
#13
|
|||
|
|||
Do Shimano SPD road pedal clips fit on Mtn Bike shoes?
"Dan O" wrote in message ... On Apr 26, 2:30 pm, Lou Holtman wrote: Andrew Price wrote: On Sat, 26 Apr 2008 22:30:43 +0200, Lou Holtman wrote: What makes these pedals so special? If you want to walk use some kind of ATB pedals. SPD, Time Atac, Speedplay Frogs etc. They are all two sided as a bonus. Almost all. Shimano's A520: http://bike.shimano.com/publish/content/global_cycle/en/us/index/prod... is single-sided. If you decide for SPD it would be dumb to pick single sided. I can not think of a reason not to pick a two sided pedal. What about cornering / ground clearance? What about component quality and overall cost? What about fewer moving parts to maintain? I don't know if these are valid - just some thoughts that came to mind. Hardly valid IMHO. Many people have some kind of excuse not to use two sided SPD pedals. Even top notch XTR SPD pedals (70 euro) are cheaper than most racy road pedals. Lou |
#14
|
|||
|
|||
Do Shimano SPD road pedal clips fit on Mtn Bike shoes?
Lou Holtman wrote:
Others obviously do not agree, I can not think of a reason not to pick a two sided pedal. For some people with rather long cranks on low BBs the cornering clearance might be a point. I simply find them more convenient: always hanging the same way it's easy to tip and click without looking. Comparing the A520 with my two sided 747 the A520 with its cage offers a more solid base, using MTB shoes. -- MfG/Best regards helmut springer panta rhei |
#15
|
|||
|
|||
Do Shimano SPD road pedal clips fit on Mtn Bike shoes?
Dan O wrote:
What about cornering / ground clearance? Potentially. What about component quality and overall cost? No quality question left open with high end two sided SPD pedals, and road pedals tend to be more expensive. You typically won't get Ti spindles...which I think is in line with quality 8) What about fewer moving parts to maintain? Doesn't apply. Bearings are good, overall design is for mud and dirt anyway. Of course one, IMHO valid, aspect is the looks. -- MfG/Best regards helmut springer panta rhei |
#16
|
|||
|
|||
Do Shimano SPD road pedal clips fit on Mtn Bike shoes?
"Helmut Springer" wrote in message ... Lou Holtman wrote: Others obviously do not agree, I can not think of a reason not to pick a two sided pedal. For some people with rather long cranks on low BBs the cornering clearance might be a point. Did you measure the difference in cornering clearance. I think a wider cage works in the wrong direction. I simply find them more convenient: always hanging the same way it's easy to tip and click without looking. I just step on my double sided SPD without looking. Comparing the A520 with my two sided 747 the A520 with its cage offers a more solid base, using MTB shoes. I can understand that. Lou |
#17
|
|||
|
|||
Do Shimano SPD road pedal clips fit on Mtn Bike shoes?
On Mon, 28 Apr 2008 09:12:20 +0200, "Lou Holtman"
wrote: Hardly valid IMHO. Many people have some kind of excuse not to use two sided SPD pedals. Even top notch XTR SPD pedals (70 euro) are cheaper than most racy road pedals. The Shimano A520 pedals cost a *lot* less than that (like less than half...) |
#18
|
|||
|
|||
Do Shimano SPD road pedal clips fit on Mtn Bike shoes?
On Sun, 27 Apr 2008 18:44:20 GMT, Ryan Cousineau
wrote: The meta-question is why you bought SPD-SL pedals if you like to be able to walk off the bike. If I've understood correctly, he hasn't bought them yet - he wanted to know if he did, would they fit the shoes he already has. |
#19
|
|||
|
|||
Do Shimano SPD road pedal clips fit on Mtn Bike shoes?
In article ,
"Lou Holtman" wrote: "Helmut Springer" wrote in message ... Lou Holtman wrote: Others obviously do not agree, I can not think of a reason not to pick a two sided pedal. For some people with rather long cranks on low BBs the cornering clearance might be a point. Did you measure the difference in cornering clearance. I think a wider cage works in the wrong direction. I simply find them more convenient: always hanging the same way it's easy to tip and click without looking. I just step on my double sided SPD without looking. I have found a pedal to satisfy both of you: http://exustar.com/pr77.php It's a floor wax, and a dessert topping, -- Ryan Cousineau http://www.wiredcola.com/ "In other newsgroups, they killfile trolls." "In rec.bicycles.racing, we coach them." |
#20
|
|||
|
|||
Do Shimano SPD road pedal clips fit on Mtn Bike shoes?
Lou Holtman wrote:
For some people with rather long cranks on low BBs the cornering clearance might be a point. Did you measure the difference in cornering clearance. I think a wider cage works in the wrong direction. Nope, I'm partly still using PD6500 (old Ultegra), Exustar make similar one sided SPD. I just step on my double sided SPD without looking. With the 747 I find that I can hit them on small side where the cleat will catch a little and I've to re-enter. -- MfG/Best regards helmut springer panta rhei |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS:RETRO VITTORIA ROAD SHOES FOR TOE CLIPS,SIZE 40,BLACK LEATHER | [email protected] | Marketplace | 0 | April 14th 06 10:24 PM |
Regular shoes with Shimano PD-A520 SPD Pedal | Dumb Newbie | Techniques | 8 | May 14th 05 07:00 AM |
FA Shimano Road Pedal | Default | UK | 0 | April 22nd 05 12:54 AM |
FA: Top-end DMT R2 Road Shoes 44.0, NIB, NR..L@@K!!! PERFECT FOR SPEEDPLAY PEDAL USERS... | [email protected] | Marketplace | 0 | March 5th 05 06:00 PM |
best shoes for Shimano M540 pedals for a *road/racing* bike use? | Yuri Budilov | Techniques | 10 | September 22nd 04 01:17 AM |