|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Giraffe unicycle free mounting (no steps, steps and brake steps)
A) Up to 6 foot tall giraffe unicycles:
Many unicyclists can free mount (in the open) a six foot unicycle WITHOUT any special wheel locking devices. Here are two web pages that might help: http://www.unicycling.org/unicycling/mg.html http://www.unicyclist.com/forums/sho...hlight=giraffe This describes only the standard giraffe. There are many other mounts that can be done on a giraffe such as the catapult mount, side mount, etc. However, they are not the focus of this post. B) 7-10 foot and even taller giraffe unicycles: Giraffe unicycles taller than six feet usually have one or possibly more built in steps welded to the frame that are used to free mount. These steps do NOT prevent the wheel from moving. Tom Miller of The Unicycle Factory makes these as well as many others. He is also an extremely experienced giraffe unicycle rider and can probably tell us about many giraffe unicycles and how to free mount them. Here's his web page: http://www.tux.org/~bagleyd/unicycle_factory/ His custom giraffe and other custom unicycles can be found he http://www.tux.org/~bagleyd/unicycle...ry/custom.html You can call him at (765) 452-2692. (He doesn't have e-mail and doesn't have time to respond to postal mail.) He has also build giraffe unicycles with step activated brakes and can describe them and their use much better than I can. C) Giraffe unicycles with step activated brakes used for free mounting: The spring loaded step activates a standard bicycle brake via a brake cable. Unicycles with these are usually at least eight tall and often much taller. They are rare and expensive to build. free mount. These steps are at the back of the frame, hinged at the frame and have a rather long lever extending in the front of the frame attached to the brake cable. A spring is also attached to this lever pulling down to keep the brake from engaging when there is no weight on any of the steps. Of course weight on any of the steps causes the step to go down about 15-20 degrees where a fixed stop prevents further downward movement of the step. The lever of course goes up 15-20 degrees and pulls a brake cable up enough to fully engage the brake. The brake should be adjusted so the brake pads are about 1/8" from the rim when not engaged to ensure that they don't drag or engage themselves due solely to mis-calibration (adjustment) of the brakes. D) Extremely unusual hopping method of free mounting very tall giraffes: http://www.unicycling.org/unicycling...mail/1280.html Here's a thing NOT to do (or to do extremely carefully): A pedal grab up to the first step of a tall giraffe being ridden by someone else. DO NOT do this to a giraffe with a step activated brake! The giraffe rider will not be happy with your free loading on his brake! Sincerely, Ken Fuchs |
Ads |
#2
|
|||
|
|||
Giraffe unicycle free mounting (no steps, steps and brake steps)
On Mon, 10 Nov 2003 13:07:51 -0600, Ken Fuchs
wrote: Here are two web pages that might help: Additionally, A. A few tips towards the bottom of http://www.semcycle.com/php/tips.php. B. Instructive set of 5 photos at http://lutkus.com/photos/giraffe/freemount/. Klaas Bil - Newsgroup Addict -- Grizzly bear droppings have bells in them and smell like pepper spray. - UniBrier |
#3
|
|||
|
|||
Giraffe unicycle free mounting (no steps, steps and brake steps)
On Mon, 10 Nov 2003 13:07:51 -0600, Ken Fuchs
wrote: Here are two web pages that might help: Additionally, A. A few tips towards the bottom of http://www.semcycle.com/php/tips.php. B. Instructive set of 5 photos at http://lutkus.com/photos/giraffe/freemount/. Klaas Bil - Newsgroup Addict -- Grizzly bear droppings have bells in them and smell like pepper spray. - UniBrier |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
*Edit Me* - New FAQ addition on brake squeal. | ant | Techniques | 1 | July 23rd 03 06:52 AM |