|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Bicycle bottle diameters, why different?
Just ordered a bottle from Stansport. It is nice but much smaller in
diameter than my California Bike Gear bottle which is a snug fit. So the Stansport bottle rattles around in there. Why can't they agree on one standard diameter? In the electronics industry we got that licked decades ago. Any tricks how to adapt to both without bending the cage back and forth? -- Regards, Joerg http://www.analogconsultants.com/ |
#2
|
|||
|
|||
Bicycle bottle diameters, why different?
On 3/20/2018 10:58 AM, Joerg wrote:
Just ordered a bottle from Stansport. It is nice but much smaller in diameter than my California Bike Gear bottle which is a snug fit. So the Stansport bottle rattles around in there. Why can't they agree on one standard diameter? In the electronics industry we got that licked decades ago. Any tricks how to adapt to both without bending the cage back and forth? A standard bicycle water bottle is 2.875" (73 mm). There are cages available for larger bottles. I have the best large cage on a couple of bicycles. It means one bottle instead of two. It's also extremely secure. It's item #1 on my page at http://tinyurl.com/notatlbs. There is also a cage for a growler (#3). I recently saw adjustable diameter cages that us a rubber strap, at Target and Walmart. Secure, but time consuming to get the bottle in and out. |
#3
|
|||
|
|||
Bicycle bottle diameters, why different?
On 2018-03-20 12:45, sms wrote:
On 3/20/2018 10:58 AM, Joerg wrote: Just ordered a bottle from Stansport. It is nice but much smaller in diameter than my California Bike Gear bottle which is a snug fit. So the Stansport bottle rattles around in there. Why can't they agree on one standard diameter? In the electronics industry we got that licked decades ago. Any tricks how to adapt to both without bending the cage back and forth? A standard bicycle water bottle is 2.875" (73 mm). The Stansport is 2.820" (71.5mm) and the Cal Bike Gear is 2.885" (73.3mm). Even worse is that the indentation ring is off by about 0.300". How can this happen? In medical, aerospace or other electronics we'd get flogged for that. There are cages available for larger bottles. I have the best large cage on a couple of bicycles. It means one bottle instead of two. It's also extremely secure. It's item #1 on my page at http://tinyurl.com/notatlbs. There is also a cage for a growler (#3). Then I'd have another boutique solution, new bottles and all that. I was hoping the bicycle industry would have agree to a bottle standard but that hope was just dashed, like many others. I recently saw adjustable diameter cages that us a rubber strap, at Target and Walmart. Secure, but time consuming to get the bottle in and out. I can also wrap some sort of bungee cord around it, hobo-style. However, that gets old and the bottle won't go back in easily without pushing the bungee down. -- Regards, Joerg http://www.analogconsultants.com/ |
#4
|
|||
|
|||
Bicycle bottle diameters, why different?
On Tuesday, March 20, 2018 at 1:54:55 PM UTC-7, Joerg wrote:
On 2018-03-20 12:45, sms wrote: On 3/20/2018 10:58 AM, Joerg wrote: Just ordered a bottle from Stansport. It is nice but much smaller in diameter than my California Bike Gear bottle which is a snug fit. So the Stansport bottle rattles around in there. Why can't they agree on one standard diameter? In the electronics industry we got that licked decades ago. Any tricks how to adapt to both without bending the cage back and forth? A standard bicycle water bottle is 2.875" (73 mm). The Stansport is 2.820" (71.5mm) and the Cal Bike Gear is 2.885" (73.3mm). Even worse is that the indentation ring is off by about 0.300". How can this happen? In medical, aerospace or other electronics we'd get flogged for that. As you should -- in fact, flog yourself for this, too. There are cages available for larger bottles. I have the best large cage on a couple of bicycles. It means one bottle instead of two. It's also extremely secure. It's item #1 on my page at http://tinyurl.com/notatlbs. There is also a cage for a growler (#3). Then I'd have another boutique solution, new bottles and all that. I was hoping the bicycle industry would have agree to a bottle standard but that hope was just dashed, like many others. n your day. I can All my dozens of bottles are within spec, and it is clear to me that the manufacturers are out to f*** with you. This is about you and only you. Cheap-**** water bottle makers like Stansport and Cal Bike Gear got together and said "let's f**** with Joerg." I'm so sorry for you. Next, they'll be screwing with your inner-tubes. Instead of 1.75-2.5" it will be 1.76661-2.499999". This is pay-back for all your complaining about the poor quality of bicycle components. When you make your next bottle order, use a different name. -- Jay Beattie. |
#5
|
|||
|
|||
Bicycle bottle diameters, why different?
On 3/20/2018 1:54 PM, Joerg wrote:
snip The Stansport is 2.820" (71.5mm) and the Cal Bike Gear is 2.885" (73.3mm). Even worse is that the indentation ring is off by about 0.300". How can this happen? In medical, aerospace or other electronics we'd get flogged for that. There is no standards body for water bottles. The diameter is supposed to be 2.875" (73mm) with the indentation on tall bottles at 5.0" (127mm). You should write a letter to Stansport. Maybe consider contacting an attorney about a class action lawsuit. Claim that the bottle bounced out on a trail and a mountain lion took it. Jay can handle the lawsuit for you. I can also wrap some sort of bungee cord around it, hobo-style. However, that gets old and the bottle won't go back in easily without pushing the bungee down. Use layers of heat shrink tubing until you get that extra 1.5mm or so. Of course that size heat shrink tubing will likely cost more than just buying a proper bottle. |
#6
|
|||
|
|||
Bicycle bottle diameters, why different?
On 2018-03-20 15:01, sms wrote:
On 3/20/2018 1:54 PM, Joerg wrote: snip The Stansport is 2.820" (71.5mm) and the Cal Bike Gear is 2.885" (73.3mm). Even worse is that the indentation ring is off by about 0.300". How can this happen? In medical, aerospace or other electronics we'd get flogged for that. There is no standards body for water bottles. The diameter is supposed to be 2.875" (73mm) with the indentation on tall bottles at 5.0" (127mm). The center of the indentation is 5-1/2" on the Stansport bottle and 5-3/4" on the Cal Bike bottle (which fits all holders like a glove). You should write a letter to Stansport. Maybe consider contacting an attorney about a class action lawsuit. Claim that the bottle bounced out on a trail and a mountain lion took it. Jay can handle the lawsuit for you. That would only work if the mountain lion then choked on it and needed expensive medical attention, followed by a few cat shrink sessions. For a class action it would have to affect his tribe and two or three others. I can also wrap some sort of bungee cord around it, hobo-style. However, that gets old and the bottle won't go back in easily without pushing the bungee down. Use layers of heat shrink tubing until you get that extra 1.5mm or so. Of course that size heat shrink tubing will likely cost more than just buying a proper bottle. The question is, how do you know if a bottle is proper when buying one online? -- Regards, Joerg http://www.analogconsultants.com/ |
#7
|
|||
|
|||
Bicycle bottle diameters, why different?
On 3/20/2018 3:18 PM, Joerg wrote:
snip The question is, how do you know if a bottle is proper when buying one online? Stansport is primarly a camping equipment company. Buy from a supplier of bicycle equipment. I like the Clean Designs bottle https://www.cleanbottle.com/ |
#8
|
|||
|
|||
Bicycle bottle diameters, why different?
On 3/20/2018 6:18 PM, Joerg wrote:
The question is, how do you know if a bottle is proper when buying one online? It's impossible. There's absolutely no way. So go to your LBS. -- - Frank Krygowski |
#9
|
|||
|
|||
Bicycle bottle diameters, why different?
On Tuesday, March 20, 2018 at 9:54:55 PM UTC+1, Joerg wrote:
On 2018-03-20 12:45, sms wrote: On 3/20/2018 10:58 AM, Joerg wrote: Just ordered a bottle from Stansport. It is nice but much smaller in diameter than my California Bike Gear bottle which is a snug fit. So the Stansport bottle rattles around in there. Why can't they agree on one standard diameter? In the electronics industry we got that licked decades ago. Any tricks how to adapt to both without bending the cage back and forth? A standard bicycle water bottle is 2.875" (73 mm). The Stansport is 2.820" (71.5mm) and the Cal Bike Gear is 2.885" (73.3mm). Even worse is that the indentation ring is off by about 0.300". How can this happen? In medical, aerospace or other electronics we'd get flogged for that. There are cages available for larger bottles. I have the best large cage on a couple of bicycles. It means one bottle instead of two. It's also extremely secure. It's item #1 on my page at http://tinyurl.com/notatlbs. There is also a cage for a growler (#3). Then I'd have another boutique solution, new bottles and all that. I was hoping the bicycle industry would have agree to a bottle standard but that hope was just dashed, like many others. I recently saw adjustable diameter cages that us a rubber strap, at Target and Walmart. Secure, but time consuming to get the bottle in and out. I can also wrap some sort of bungee cord around it, hobo-style. However, that gets old and the bottle won't go back in easily without pushing the bungee down. -- Regards, Joerg http://www.analogconsultants.com/ Your waterbottle holder can't handle a diameter difference of 1.8 mm? Get a better one. Lou |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Seat Post Diameters | Steve Freides[_2_] | Techniques | 10 | September 7th 10 06:26 PM |
Handlebar diameters? | Duncan Smith | Techniques | 6 | October 8th 07 11:38 PM |
Available diameters on integrated headsets? | dabac[_41_] | Techniques | 6 | September 20th 07 11:33 AM |
Chain Ring Diameters | James Fitch | Techniques | 3 | March 7th 07 02:41 AM |
How does one measure wheel diameters? | Alan Holmes | UK | 8 | December 20th 06 10:52 PM |