#1
|
|||
|
|||
MRP
Hey
Has anyone fitted a System 1 MRP chain device to a hardtail with standard (lower) chainstays. The chainline is a bit screwed what with the back plate hitting the chainstay. Any ideas other than getting a system 2, as the MRP website says you can get a system 1 to work with lower chainstays fine. -- Matt Fear of a flat planet |
Ads |
#2
|
|||
|
|||
MRP
Matthew Paterson wrote:
Hey Has anyone fitted a System 1 MRP chain device to a hardtail with standard (lower) chainstays. The chainline is a bit screwed what with the back plate hitting the chainstay. Any ideas other than getting a system 2, as the MRP website says you can get a system 1 to work with lower chainstays fine. Check to see if your bottom bracket is asymmetrical... i.e., the spindle may be longer one one end to allow for the inner plate. Reverse it if this is so. My MRP-equipped bike has ass chainline, too. The chainline is straight on gears 7 and 8 out of 9. I had to grind down the inner plate a LOT in order to stop it from hitting the stays. -- Phil, Squid-in-Training |
Thread Tools | |
Display Modes | |
|
|