|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Mavic Open Pro or hand built?
maxo wrote:
On Sat, 06 Aug 2005 15:08:40 +0000, Robin Hubert wrote: Fifty bucks is exhorbitant. More like $25 for a pair. I was thinking wheelbuilding pricing. Oops. I am thinking Mavic Open Pro. Now, being that I cannot find any Open Pro pre-built wheelsets (online or LBS) I'm wondering if I should just get the Open Pro rims and have a local spoke them or ..... what? Open Pros are great, you can get machine built wheels on line. with them, but they're still gonna need to be finished by a pro. You don't need a pro. All you need is a $20 book and a little reading comprehension, and a spoke wrench, and maybe some leather work gloves. And a truing stand... You definitely don't need a truing stand. |
Ads |
#12
|
|||
|
|||
Mavic Open Pro or hand built?
On Sat, 06 Aug 2005 14:45:38 -0400, Peter Cole
wrote: maxo wrote: On Sat, 06 Aug 2005 15:08:40 +0000, Robin Hubert wrote: Fifty bucks is exhorbitant. More like $25 for a pair. I was thinking wheelbuilding pricing. Oops. I am thinking Mavic Open Pro. Now, being that I cannot find any Open Pro pre-built wheelsets (online or LBS) I'm wondering if I should just get the Open Pro rims and have a local spoke them or ..... what? Open Pros are great, you can get machine built wheels on line. with them, but they're still gonna need to be finished by a pro. You don't need a pro. All you need is a $20 book and a little reading comprehension, and a spoke wrench, and maybe some leather work gloves. And a truing stand... You definitely don't need a truing stand. The bike can work as a truing stand. It can also work as a dishing tool. But both of these special tools -- esp a dishing tool -- can make the experience go much quicker. JT **************************** Remove "remove" to reply Visit http://www.jt10000.com **************************** |
#13
|
|||
|
|||
Mavic Open Pro or hand built?
On Sat, 06 Aug 2005 14:45:38 -0400, Peter Cole wrote:
And a truing stand... You definitely don't need a truing stand. OK, you can true the wheel placed in a spare fork that's mounted upside down in a hole on your work bench with a c-clamp and a playing card to judge alignment. :P Or flip the bike upside down, which is what I do for quick adjustments. But if you're thinking of paying $300 for a new set of wheels...what's a fifty dollar consumer grade truing stand in the grand scheme? |
#14
|
|||
|
|||
Mavic Open Pro or hand built?
maxo wrote:
On Sat, 06 Aug 2005 14:45:38 -0400, Peter Cole wrote: And a truing stand... You definitely don't need a truing stand. OK, you can true the wheel placed in a spare fork that's mounted upside down in a hole on your work bench with a c-clamp and a playing card to judge alignment. :P Or flip the bike upside down, which is what I do for quick adjustments. But if you're thinking of paying $300 for a new set of wheels...what's a fifty dollar consumer grade truing stand in the grand scheme? Alot of beer to enhance the experience. Robin Hubert |
#15
|
|||
|
|||
Mavic Open Pro or hand built?
On Sat, 06 Aug 2005 19:47:25 +0000, Robin Hubert wrote:
But if you're thinking of paying $300 for a new set of wheels...what's a fifty dollar consumer grade truing stand in the grand scheme? A lot of beer to enhance the experience. Point taken. If I had the space, I'd still get a truing stand as I've always wanted one. :P |
#16
|
|||
|
|||
Mavic Open Pro or hand built?
"Robin Hubert" wrote in message k.net... Oh, yes, Peter, "there is no bike shop like mine, no bike shop like mine (refrain)". And Campagnolo does no wrong (even if they admit it). Robin Hubert I believe that your message might have been a candidate for the write, hold for 24 hours, reread, then decide to sent or not category. I am sure that there is some history between you and Peter, and he has a well known "hand built wheels & Campy components bias", but I think that he has been a wonderful resource for this group over many years and I would be extremely sad to see him leave. ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#17
|
|||
|
|||
Mavic Open Pro or hand built?
Frank Drackman wrote:
"Robin Hubert" wrote in message k.net... Oh, yes, Peter, "there is no bike shop like mine, no bike shop like mine (refrain)". And Campagnolo does no wrong (even if they admit it). Robin Hubert I believe that your message might have been a candidate for the write, hold for 24 hours, reread, then decide to sent or not category. I am sure that there is some history between you and Peter, and he has a well known "hand built wheels & Campy components bias", but I think that he has been a wonderful resource for this group over many years and I would be extremely sad to see him leave. ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- Fair enough, but the honesty and politics don't mix too well. Did you read my "pompous ass" comment? Robin Hubert |
#18
|
|||
|
|||
Mavic Open Pro or hand built?
"Robin Hubert" wrote in message k.net... Frank Drackman wrote: "Robin Hubert" wrote in message k.net... Oh, yes, Peter, "there is no bike shop like mine, no bike shop like mine (refrain)". And Campagnolo does no wrong (even if they admit it). Robin Hubert I believe that your message might have been a candidate for the write, hold for 24 hours, reread, then decide to sent or not category. I am sure that there is some history between you and Peter, and he has a well known "hand built wheels & Campy components bias", but I think that he has been a wonderful resource for this group over many years and I would be extremely sad to see him leave. ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- Fair enough, but the honesty and politics don't mix too well. Did you read my "pompous ass" comment? I did not see the pompous ass comment ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#19
|
|||
|
|||
Mavic Open Pro or hand built?
The Quiet Man wrote: http://www.performancebike.com/shop/...TOKEN=76732712 $199.00 Search Google for a $20 off $150 coupon. BUT make sure a good wheelbuilder trues, rounds, tensions, dishes and stress relieves these.. |
#20
|
|||
|
|||
Mavic Open Pro or hand built?
maxo wrote:
On Sat, 06 Aug 2005 14:45:38 -0400, Peter Cole wrote: And a truing stand... You definitely don't need a truing stand. OK, you can true the wheel placed in a spare fork that's mounted upside down in a hole on your work bench with a c-clamp and a playing card to judge alignment. :P Or flip the bike upside down, which is what I do for quick adjustments. But if you're thinking of paying $300 for a new set of wheels...what's a fifty dollar consumer grade truing stand in the grand scheme? I just hang the bike from the saddle nose with a rope from the garage ceiling, or, in nice weather, use the rack on the back of my van. I use the brake pads to gauge trueness and eyeball the dish (I usually mount a tire). I've done perhaps a dozen pairs of wheels this way over the past few years. FWIW, I've never paid anything like $300 for a set of wheels. My most expensive set was $215 shipped, which included Mavic Open Pro rims, DT spokes, Ultegra hubs, 9-sp cassette, tubes and tires (Supergo). Most of the other sets were $100 or less. I'm a frugal Yankee. I'm sure a truing stand is nice, as is a tensiometer, work stand and lots of other doo-dads -- they're just not necessary. Frugality in my world is more about simplification than money. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mavic Tubular Helium & Mavic Open Pro wheels, Tires on Ebay | [email protected] | Marketplace | 0 | December 8th 04 04:58 AM |
F.S. MORE MAVIC RIMS *NEW* $20.00 | Biged \(remove nospam to reply\) | Marketplace | 0 | September 8th 04 02:29 PM |
F.S. MORE MAVIC RIMS *NEW* $20.00 | Biged \(remove nospam to reply\) | Marketplace | 0 | September 1st 04 07:25 PM |
F.S. MORE MAVIC RIMS *NEW* $20.00 | Biged \(remove nospam to reply\) | Marketplace | 0 | September 1st 04 04:12 PM |
Mavic CXP-33s or Mavic Open Pros? | Dave Stallard | General | 26 | November 11th 03 11:57 PM |