|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
just broke another frame...
I just broke the frame on my aluminium MTB. The top tube has snapped all
around the the weld with the headstock. Is it worth getting this welded back together? I broke my titanium framed road bike about a month ago and it is still not back from warranty repair so not too happy. |
Ads |
#2
|
|||
|
|||
just broke another frame...
On Fri, 12 Dec 2003 20:04:24 +0100, Ric wrote:
I just broke the frame on my aluminium MTB. The top tube has snapped all around the the weld with the headstock. Is it worth getting this welded back together? No,it'll just make it weaker at that point, if its possible to weld at all. Depending on make and age, a lot of manufacturers offer a good warranty on frames, maybe ring the makers to find out? I broke my titanium framed road bike about a month ago and it is still not back from warranty repair so not too happy. What are you doing to bend frames? I've raced off road for over 5 years now, and can only recall seeing around 5 broken frames in all that time. Alan. -- To reply by e-mail, change the 'minus' to 'plus'. http://www.dvatc.co.uk - Off-road cycling in the North Midlands. |
#3
|
|||
|
|||
just broke another frame...
"Ric" writes:
I just broke the frame on my aluminium MTB. The top tube has snapped all around the the weld with the headstock. Is it worth getting this welded back together? Two questions: What make? If it's a reputable make there may be some chance of getting a new frame under warranty, or at least at a very substantial discount. What are you doing to break frames? I mean, it's possible that you're just unlucky, but frames are on the whole pretty hard to break. Possibly you need to consider changes to your riding style? -- (Simon Brooke) http://www.jasmine.org.uk/~simon/ Anagram: I'm soon broke. |
#4
|
|||
|
|||
just broke another frame...
"Simon Brooke" wrote in message . uk... "Ric" writes: Possibly you need to consider changes to your riding style? Or lose a whole load of lard. |
#5
|
|||
|
|||
just broke another frame...
"Andy" wrote in message ... "Simon Brooke" wrote in message . uk... "Ric" writes: Possibly you need to consider changes to your riding style? Or lose a whole load of lard. Well that's a bit of a nasty assumption - I'm actually perfect weight for my height according to BMA. |
#6
|
|||
|
|||
just broke another frame...
"Simon Brooke" wrote in message . uk... "Ric" writes: ? Two questions: What make? If it's a reputable make there may be some chance of getting a new frame under warranty, or at least at a very substantial discount. Mercedes bike (don't laugh - terrible mistake buying it). I suspect you are right that they will replace it or fix it if I complain enough. But it will be a lot of stress and hassle arguing with them and even if they agree to fix it it will be a minimum of six-eight weeks away (it has already had two warranty repairs). It would be a whole lot less stress-free just to get it welded back together if there was a chance of it being strong enough. What are you doing to break frames? I mean, it's possible that you're just unlucky, but frames are on the whole pretty hard to break. Possibly you need to consider changes to your riding style? I think it may be because of my height. I'm 1.95m which is not particularly tall by modern standards but nevertheless it is hard to buy off the peg bikes that are really big enough for me so I have to have a long seat post on all my bikes. I think the long seat post on my Mercedes bike put to big a leverage on the tube at the headstock. Even my titanium frame bike needed a long seat post even though it was made to measure, because the builder said that otherwise the flex in the frame would be too difficult to control. That one broke down at the pedal crank. I think an exacerbating factor is that I live in a very hilly area, and use my bikes to carry shopping etc, so the frames are having to support larger than normal torque loads. By the way you seem to have disappeared off uk.rec.sailing - I can understand why! |
#7
|
|||
|
|||
just broke another frame...
"Ric" wrote in message ... ..... bikes that are really big enough for me so I have to have a long seat post on all my bikes. I think the long seat post on my Mercedes bike put to big a leverage on the tube at the headstock. Even my titanium frame bike needed a long seat post even though it was made to measure, because the builder said that otherwise the flex in the frame would be too difficult to control. That one broke down at the pedal crank. I think an exacerbating factor is that I live in a very hilly area, and use my bikes to carry shopping etc, so the frames are having to support larger than normal torque loads. Aha. So maybe your next bike should be a custom steel-framed tourer. Could save money in the long run....;-). Rich |
#8
|
|||
|
|||
just broke another frame...
"Richard Goodman" wrote in message ... Aha. So maybe your next bike should be a custom steel-framed tourer. Could save money in the long run....;-). Yes I already have one - a big black German one. I'd be really unhappy and amazed if I managed to break that! |
#9
|
|||
|
|||
just broke another frame...
Ric wrote:
I just broke the frame on my aluminium MTB. The top tube has snapped all around the the weld with the headstock. Is it worth getting this welded back together? No. Doesn't it have a lifetime warranty? I broke my titanium framed road bike about a month ago and it is still not back from warranty repair so not too happy. Do you jump a lot? |
#10
|
|||
|
|||
just broke another frame...
Ric wrote:
I think it may be because of my height. I'm 1.95m which is not particularly tall by modern standards but nevertheless it is hard to buy off the peg bikes that are really big enough for me so I have to have a long seat post on all my bikes. I think the long seat post on my Mercedes bike put to big a leverage on the tube at the headstock. Pretty unlikely. I think it was just a duff frame. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: 63cm Italian road/touring frame, 1980's, BEAUTIFUL!! | ccrider | Marketplace | 1 | March 11th 04 01:00 PM |
Team vs Strada | mjbass | Recumbent Biking | 43 | January 5th 04 03:28 AM |
Carbon frame intregrity after accident | Jürgen Hartwig | Techniques | 37 | November 6th 03 02:32 PM |
FAQ | Just zis Guy, you know? | UK | 27 | September 5th 03 10:58 PM |
Custom Unicycles - Why? | JJuggle | Unicycling | 10 | August 26th 03 12:41 AM |