A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » Regional Cycling » Australia
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Some thoughts on Vistalight (vistalite?) batteries



 
 
Thread Tools Display Modes
  #11  
Old July 6th 03, 11:48 AM
John Doe
external usenet poster
 
Posts: n/a
Default Some thoughts on Vistalight (vistalite?) batteries


"Gags" wrote in message
...
: housing/heatsink that i mounted it in.
:
: Cheers,
:
: Gags
:


Dont suppose you have pictures

Pete


Ads
  #12  
Old July 6th 03, 12:26 PM
stu
external usenet poster
 
Posts: n/a
Default Some thoughts on Vistalight (vistalite?) batteries

l must be going blind they are on jaycars web site, missed them when l
looked. l wish they made them in 10w but stuff it l am not a weight weenie l
will just get another battery.
thanks


  #13  
Old July 7th 03, 03:46 AM
stu
external usenet poster
 
Posts: n/a
Default Some thoughts on Vistalight (vistalite?) batteries

thanks for that dave
l will pick up a 10W one next time l am at kmart.
"PWM set up at a 50% duty cycle" did you build this yourself? l have see the
light brain on hippys site but while l could put it together, l couldn't do
the code(l dont think)

now, is 3 lights to many?
l am also working on an mounting a couple of leds so l can see my HRM and
speedo, and maybe even what gear l am in(but l think that would be a little
over the top, but how much could 4 leds and 2 AA batteries weigh?)

stuart


  #14  
Old July 9th 03, 06:23 PM
AJS
external usenet poster
 
Posts: n/a
Default Some thoughts on Lighting


I have spent a few hours and some $$ on lighting lately. Here are some of my
thoughts.

Try and get Phillips, GE or Osram. The Jaycar bulbs and light assembly are
quite poor. Poor light output, Poor colouring. Basically junk. If anyone is
looking at using bi pin bulbs (I haven't tested assemblies yet) then GE is
the
way to go (34715 Is what I tested). Nice white light. I would then go for
Phillips and Osram in that order. How do I know this ? Well I have just
finished building some lights using small car spotlights (Don't waste your
money of cheapies) and custom bulb holders. It works very well. I spent MANY
hours testing differing bulbs, filament types Ect. side by side. I am
currently looking for some projector bulbs to test them. If they can cope
with the vibration
then I will probably stick with them. 25% brighter than the brightest bulb I
can find with the usual reduced life.

I know that Osram make a assembly that uses an Xenon bulb (IRC). I was not
overly impressed with these (Actually disappointed). Not as bright as they
should have been until over voltaged. (I know that someone in Adelaide is
currently looking at using these to take a product to market with.)

There is a HUGE different in light output, colour and quality between
different bulb's/housings. For the people who have built them I would
recommend looking at what they are using and if they can get an additional
performance increase for little outlay.


I hope this is of interest and help to a few of you. It was not posted to a
relevant post in this thread as I could not decide which one.




AJS



P.s I am looking at setting up an light meter and measuring the output and
spectrum of different lights. If I do I will post URL for interested
parties. If anyone know where I can get HID 10-20W bulbs for a decent price
let me know, this is my pet project that is just a little to expensive to
finish at the moment




"kingsley" wrote in message
news[email protected] st.com.au...

Have you ever seen the discharge graph for NiCd batteries?

It goes roughly:

|...............
V | :
| :
+====================
time

I can tell you that NiMH feels about the same.

The problem is that, as Murphy would have it, that
abrupt turn in the graph corresponds to the curve
you're riding down, in the rain, on the commute
home from work. You've just about got time to to
think "Hmmm, that light is looking a bit dull", and
then a minute later it's just about out. Maybe it
had been a bit duller earlier, but riding in those
dawn/dusk times it's impossible to tell.

This has led me to thoughts of other batteries. IMHO the
vistalight 'nitestick' is not too bad, and I think
for it's price it's good, I'm happy with mine anyway.
I must remember to charge it every couple of days though.

But each battery is only 2200mAh at 7.2V. Why is it
such a bulky battery supplies only 2200mAh? I must be
missing something. I know a photo shop that sells 2000mAh
'AA' batteries - admittedly AA is only 1.5 volts (which is
really 1.2V talking NiCd/NiMH).
Wouldn't 6 of these ganged together give me 12000mAh and
probably weigh the same as a nightstick?
Have I missed someting here?
Can someone suggest a better SLA alternative?

A nightstick battery (NiMH) costs about $70,
a pack of 4 2000mAh AAs (IIRC) about $50 with a charger.

cheers,
-kt



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Vistalite VL400 Series NLee1875 Techniques 1 November 19th 03 08:19 AM
2 batteries powering 1 lamp / Vistalite Nightstick scottshields Techniques 5 November 5th 03 02:31 PM


All times are GMT +1. The time now is 08:41 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2004-2017 CycleBanter.com.
The comments are property of their posters.