|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
FS: NOS Square Taper BBs
All prices in US dollars, shipping extra, paypal accepted
Real Crankcase - Brand new - spindle lengths of 103, 107, 113, 115mm, 117.5mm and 122mm, english cups only - will work with either 68 or 73mm BB shells - Cartridge design (uses standard shimano cartridge BB tool) with sealed cartridge bearings - hollow CrMo spindles, Al cups, 220g to 245g weight (depends on length) - $40 each See pic at http://206.75.155.18/kmr/bikes/real.jpg KMR Cycles Titanium - Brand New - hollow Ti 6/4 spindle BBs, in 103, 107, and 127.5mm sizes, 68mm english or 70mm italian cups - complete weight with bearings and Ti bolts varies by spindle length from 170 to 190 grams - includes choice of Ti crank bolts between 14mm hex head with seperate Ti washers or 8mm allen head with intergrated Ti washers - Does not include cartridge bearings (uses size 6903-2RS, available at any good bearing supplier) - $40 each See pic at http://206.75.155.18/kmr/bikes/spindles.jpg KMR Cycles Ti crank bolts - Brand New - For Square-taper spindles only - 15 grams per pair, saves approx 10-15 grams off OEM steel crank bolts - Available in 14mm hex head with seperate Ti washers or 8mm allen head with intergrated washers - $15 per pair (see above for pic of crank bolts) Suntour XC-Pro Greaseguard - As new condition, was installed once to check chainline then removed - one available in 73mm english x 119mm spindle only - CrMo spindle with grease injection ports, aluminium cups and lockrings - does not include crank bolts - 260 grams - $30 See pic at http://206.75.155.18/kmr/bikes/ggbb.jpg |
Ads |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Question: 15MM Square Taper Bolt | [email protected] | Techniques | 16 | June 22nd 05 04:56 PM |
Enlarging square taper cranks | Charles Smith | Techniques | 13 | May 2nd 05 10:17 PM |
Crank square taper...? | Kenneth | Techniques | 18 | September 22nd 04 02:03 PM |
Square Taper BBs | NickZX6R | Australia | 12 | March 24th 04 06:20 AM |
Crank square taper hole too large - options? | Phil Holman | Techniques | 12 | July 18th 03 02:10 AM |