|
|
Thread Tools | Display Modes |
#21
|
|||
|
|||
wrote in message ... I bought a cheap bike at WalMart today. It was about $60. I seriously can't imagine how they can produce and sell a bike for $60 and still make a profit. Granted they make millions of them and they use Chinese slave labor....but still. The last time I replaced the tires on my MTB - not expensive tires either - it cost me $50 for the tires and new tubes. Just yesterday I went to my LBS to order a replacement casette, chain and crank set...nearly $150. And these are by no means high end parts. Cheto |
Ads |
#22
|
|||
|
|||
wrote in message ... I bought a cheap bike at WalMart today. It was about $60. I seriously can't imagine how they can produce and sell a bike for $60 and still make a profit. Granted they make millions of them and they use Chinese slave labor....but still. The last time I replaced the tires on my MTB - not expensive tires either - it cost me $50 for the tires and new tubes. Just yesterday I went to my LBS to order a replacement casette, chain and crank set...nearly $150. And these are by no means high end parts. Cheto |
#23
|
|||
|
|||
wrote in message ... I bought a cheap bike at WalMart today. etc. What everyone else said, plus this: It's entirely likely there's something truly fundamentally wrong with the way the bike was assembled and the brakes installed. Like the pads are missing, or the brakes are on the wrong side of the fork, or the fork is backwards, or something else so stupid you probably won't believe it when you learn what it is. Aside from their innate compromises, *mart bikes are often assembled by people with no prior experience or training in the task. Go to one of the sites mentioned, parktool or sheldonbrown, and carefully compare the photographs of properly-installed brakes to your brakes. Then think about what else might have been botched in the assembly of your bike, and ask yourself if it's still a bargain if it's so dangerous you're afraid to ride it. RichC |
#24
|
|||
|
|||
wrote in message ... I bought a cheap bike at WalMart today. etc. What everyone else said, plus this: It's entirely likely there's something truly fundamentally wrong with the way the bike was assembled and the brakes installed. Like the pads are missing, or the brakes are on the wrong side of the fork, or the fork is backwards, or something else so stupid you probably won't believe it when you learn what it is. Aside from their innate compromises, *mart bikes are often assembled by people with no prior experience or training in the task. Go to one of the sites mentioned, parktool or sheldonbrown, and carefully compare the photographs of properly-installed brakes to your brakes. Then think about what else might have been botched in the assembly of your bike, and ask yourself if it's still a bargain if it's so dangerous you're afraid to ride it. RichC |
#25
|
|||
|
|||
wrote in message ... I bought a cheap bike at WalMart today. etc. What everyone else said, plus this: It's entirely likely there's something truly fundamentally wrong with the way the bike was assembled and the brakes installed. Like the pads are missing, or the brakes are on the wrong side of the fork, or the fork is backwards, or something else so stupid you probably won't believe it when you learn what it is. Aside from their innate compromises, *mart bikes are often assembled by people with no prior experience or training in the task. Go to one of the sites mentioned, parktool or sheldonbrown, and carefully compare the photographs of properly-installed brakes to your brakes. Then think about what else might have been botched in the assembly of your bike, and ask yourself if it's still a bargain if it's so dangerous you're afraid to ride it. RichC |
#26
|
|||
|
|||
"Cheto" wrote in message ... wrote in message ... I bought a cheap bike at WalMart today. It was about $60. I seriously can't imagine how they can produce and sell a bike for $60 and still make a profit. They have "full suspension" bikes for that much. Granted, the 'suspension' is little more than a spring, but to the uninitiated, they look the part. Pete |
#27
|
|||
|
|||
"Cheto" wrote in message ... wrote in message ... I bought a cheap bike at WalMart today. It was about $60. I seriously can't imagine how they can produce and sell a bike for $60 and still make a profit. They have "full suspension" bikes for that much. Granted, the 'suspension' is little more than a spring, but to the uninitiated, they look the part. Pete |
#28
|
|||
|
|||
"Cheto" wrote in message ... wrote in message ... I bought a cheap bike at WalMart today. It was about $60. I seriously can't imagine how they can produce and sell a bike for $60 and still make a profit. They have "full suspension" bikes for that much. Granted, the 'suspension' is little more than a spring, but to the uninitiated, they look the part. Pete |
#29
|
|||
|
|||
That is bull, the best way is to spray some WS-40 on them, just a lite shot.
"Mitch Haley" wrote in message ... The two main ways of getting rid of brake noise are getting rid of free play in the brakes and adjusting them so that the edge of the brake shoe closest to the front of the bike contacts the rim first. Grab a brake shoe and try to move it front to back, is the brake tight, or is it sloppy? Getting rid of that slop is the first step, but it may not be possible with a two dollar brake on a sixty dollar bike. Mitch. |
#30
|
|||
|
|||
That is bull, the best way is to spray some WS-40 on them, just a lite shot.
"Mitch Haley" wrote in message ... The two main ways of getting rid of brake noise are getting rid of free play in the brakes and adjusting them so that the edge of the brake shoe closest to the front of the bike contacts the rim first. Grab a brake shoe and try to move it front to back, is the brake tight, or is it sloppy? Getting rid of that slop is the first step, but it may not be possible with a two dollar brake on a sixty dollar bike. Mitch. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
??? about incredibly loud breaks | [email protected] | General | 15 | October 10th 04 01:57 PM |
How to tighten back pedal style breaks? | Julia Goolia | Techniques | 19 | May 10th 04 07:05 AM |