|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Clamp size front derailleur Cannondale Caad 5 frame
Hi
I want to replace my front derailleur but don't know the clamp size for a Caad 5 cannondale frame. Thanks Gerard Remery |
Ads |
#2
|
|||
|
|||
"gazelle_nl" wrote in message ... | Hi | | I want to replace my front derailleur but don't know the clamp size for a | Caad 5 cannondale frame. Pull the old one off and look at it inside the clamp. The size should be listed. At least it is on the Shimano derailleurs I've seen. You don't have to completely remove it. Just temporarily remove the cable and undo the derailleur. All you'll have to do is reattach the cable and adjust after putting it back on. Having said that, every CAAD4 and 5 I've seen used a 27.2 seatpost and a 31.7 clamp for the derailleur. John Rees |
#3
|
|||
|
|||
"gazelle_nl" wrote in message ... | Hi | | I want to replace my front derailleur but don't know the clamp size for a | Caad 5 cannondale frame. Pull the old one off and look at it inside the clamp. The size should be listed. At least it is on the Shimano derailleurs I've seen. You don't have to completely remove it. Just temporarily remove the cable and undo the derailleur. All you'll have to do is reattach the cable and adjust after putting it back on. Having said that, every CAAD4 and 5 I've seen used a 27.2 seatpost and a 31.7 clamp for the derailleur. John Rees |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
what size is my frame tube? (for upgrading derailleur) | tsp | General | 2 | October 1st 03 01:25 AM |