|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
WTB: Compact Crankset compatible with Ultegra BB
Looking for a compact crankset that is compatible with my existing Ultegra
BB. Thanks Jason replay by email to: jasonbb at comcast dot net -- ~~~~~~~~~~ __o _-\,_ Jason Byrnes (_)/ (_) ~~~~~~~~~~ |
Ads |
#2
|
|||
|
|||
Compact Crankset compatible with Ultegra BB
Forgot to add 172.5mm length.
Sorry Jason "slartibartfast" wrote in message ... Looking for a compact crankset that is compatible with my existing Ultegra BB. Thanks Jason replay by email to: jasonbb at comcast dot net -- ~~~~~~~~~~ __o _-\,_ Jason Byrnes (_)/ (_) ~~~~~~~~~~ |
#3
|
|||
|
|||
Compact Crankset compatible with Ultegra BB
Jason,
Currently compact cranks are only available in ISIS or square patterns. Shimano will release a 105 crankset for 2006 with 50/39 rings but this will be the new 2 piece style like current D/A and Ultegra. It won't be avaialble until October for OEM and probably February for aftermarket. So, unfortunately the only thing you can do is buy an ISIS bb and crankset. Or, you can use an old (pre 2002) XT or LX trekking crankset with 48/38t rings and remove the inside ring. But you would still have to buy a new BB to do this too because the mtb octalink BB's have a longer spline. I hope this helps you, Jason "slartibartfast" wrote in message ... Looking for a compact crankset that is compatible with my existing Ultegra BB. Thanks Jason replay by email to: jasonbb at comcast dot net -- ~~~~~~~~~~ __o _-\,_ Jason Byrnes (_)/ (_) ~~~~~~~~~~ |
#4
|
|||
|
|||
Compact Crankset compatible with Ultegra BB
"aotearoa706" wrote in message news:rb9Sd.108449$mt.64888@fed1read03... Jason, Currently compact cranks are only available in ISIS or square patterns. Shimano will release a 105 crankset for 2006 with 50/39 rings but this will be the new 2 piece style like current D/A and Ultegra. It won't be avaialble until October for OEM and probably February for aftermarket. So, unfortunately the only thing you can do is buy an ISIS bb and crankset. Or, you can use an old (pre 2002) XT or LX trekking crankset with 48/38t rings and remove the inside ring. But you would still have to buy a new BB to do this too because the mtb octalink BB's have a longer spline. Huh? Both Ritchey and FSA make Octalink compatible 110bcd compact cranks : http://aebike.com/site/page.cfm?PageID=30&SKU=CR3255 http://aebike.com/site/page.cfm?PageID=30&SKU=CR4121 http://aebike.com/site/page.cfm?PageID=30&SKU=CR4208 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Shimano Compact Crankset | C.H. Luu | Techniques | 31 | September 11th 05 04:04 PM |
FSA Gossomaer Compact Mega Exo Crankset | C.H. Luu | General | 2 | May 27th 05 07:34 PM |
Compact Crankset Conversion Questions | tlarwa | Techniques | 15 | April 13th 05 02:07 PM |
Replace Ultegra 9sp crankset with new 10sp crankset? | Bob | Techniques | 4 | January 29th 05 06:23 PM |
Sugino Compact Double crankset, 110 bcd, 48-34, 175 mm, | eflayer2 | Marketplace | 0 | August 14th 04 03:32 AM |