|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
I laugh in the face of seized bottom brackets...
Ha Ha Ha!
(See, that was me, laughing) As my town hack now lives in Switzerland I've recently been on the lookout for a cheap replacement. I don't like having to lock up my "posh" bike in town where some pikey git will no doubt have a crack at thieving it. So, last week I picked up a Diamondback Sorrento from my local tip for a fiver. The frame n' forks are in good nick, as are the wheels and a few other bits, spot of rust here and there but for a shopping hack that's actually desirable as far as I'm concerned. I reckoned it was a great bargain as long as I could get the seatpost and bottom bracket out when I got home..... and therein lay the rub, both seized absolutely solid. Until today! The seatpost has defied me so far but I can get that out with the hacksaw down the seat tube method, I just didn't want to spend the time if I couldn't remove the BB. I've been swearing and battling with it since last week but today my shiny new DeWalt impact wrench arrived. I plugged the battery into the charger in full view of the stubborn Diamondback so it knew the end was nigh. It had an hour left to live and I wanted it to know it (**mad cackle**!). Sixty minutes later the "fully charged" LED lit and I attacked!! BRRRR-RATTLE-BZZZZZ-BRRRRRR!!!! About 60 seconds later and victory was mine. So, if you find yourself with a seized bottom bracket, you know the tool to use. Bob -- Mail address is spam trapped To reply by email remove the beverage |
Ads |
#2
|
|||
|
|||
I laugh in the face of seized bottom brackets...
Call Me Bob wrote:
Ha Ha Ha! (See, that was me, laughing) As my town hack now lives in Switzerland I've recently been on the lookout for a cheap replacement. I don't like having to lock up my "posh" bike in town where some pikey git will no doubt have a crack at thieving it. So, last week I picked up a Diamondback Sorrento from my local tip for a fiver. The frame n' forks are in good nick, as are the wheels and a few other bits, spot of rust here and there but for a shopping hack that's actually desirable as far as I'm concerned. I reckoned it was a great bargain as long as I could get the seatpost and bottom bracket out when I got home..... and therein lay the rub, both seized absolutely solid. Until today! The seatpost has defied me so far but I can get that out with the hacksaw down the seat tube method, I just didn't want to spend the time if I couldn't remove the BB. I've been swearing and battling with it since last week but today my shiny new DeWalt impact wrench arrived. I plugged the battery into the charger in full view of the stubborn Diamondback so it knew the end was nigh. It had an hour left to live and I wanted it to know it (**mad cackle**!). Sixty minutes later the "fully charged" LED lit and I attacked!! BRRRR-RATTLE-BZZZZZ-BRRRRRR!!!! About 60 seconds later and victory was mine. So, if you find yourself with a seized bottom bracket, you know the tool to use. Bob -- Mail address is spam trapped To reply by email remove the beverage I weld a seat bracket to the seatpost aand hit it with a big hammer (not the bike). for bbs I[/url] ]http:// -- -------------------------- Posted via cyclingforums.com http://www.cyclingforums.com |
#3
|
|||
|
|||
I laugh in the face of seized bottom brackets...
How does an impact wrench work, never came across that before??
"Call me Bob" wrote in message ... Ha Ha Ha! (See, that was me, laughing) As my town hack now lives in Switzerland I've recently been on the lookout for a cheap replacement. I don't like having to lock up my "posh" bike in town where some pikey git will no doubt have a crack at thieving it. So, last week I picked up a Diamondback Sorrento from my local tip for a fiver. The frame n' forks are in good nick, as are the wheels and a few other bits, spot of rust here and there but for a shopping hack that's actually desirable as far as I'm concerned. I reckoned it was a great bargain as long as I could get the seatpost and bottom bracket out when I got home..... and therein lay the rub, both seized absolutely solid. Until today! The seatpost has defied me so far but I can get that out with the hacksaw down the seat tube method, I just didn't want to spend the time if I couldn't remove the BB. I've been swearing and battling with it since last week but today my shiny new DeWalt impact wrench arrived. I plugged the battery into the charger in full view of the stubborn Diamondback so it knew the end was nigh. It had an hour left to live and I wanted it to know it (**mad cackle**!). Sixty minutes later the "fully charged" LED lit and I attacked!! BRRRR-RATTLE-BZZZZZ-BRRRRRR!!!! About 60 seconds later and victory was mine. So, if you find yourself with a seized bottom bracket, you know the tool to use. Bob -- Mail address is spam trapped To reply by email remove the beverage |
#4
|
|||
|
|||
I laugh in the face of seized bottom brackets...
On Fri, 22 Aug 2003 10:01:10 +0100, "Tim"
wrote: How does an impact wrench work, never came across that before?? Think "hammer drill for nuts and bolts". It's basically a powered ratchet, which provides speed and effortless torque. The key though is the hammer action it gives, which is essential for tightening or cracking nuts (and seized BB's!). http://www.powertoolsuk.co.uk/webcat...W053K2&ID=1108 That's a cordless one, but they come corded of course and in much heavier and more powerful incarnations depending on intended use. Bob -- Mail address is spam trapped To reply by email remove the beverage |
#5
|
|||
|
|||
I laugh in the face of seized bottom brackets...
In ,
Call me Bob typed: Ha Ha Ha! (See, that was me, laughing) As this thread has lengthened the title has moved right in the subject listing window so it now displays "I laugh in the fce of seized bottom" Tony -- "Reality is what refuses to go away when I stop believing in it. " Philip K. Dick |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
difference between bottom brackets for road and track? | Bryan K. Walton | Techniques | 21 | January 29th 04 12:54 PM |