|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
older guy with 3-speed retro bike issues
My pedals have a bit of play; are they supposed to? I can pedal in
all three gears without causing play as long as I’m propelling forward. It doesn’t really bother me too much although it did when I started. I’m wondering: should I try to fix the play in the pedals or leave well-enough alone? Is it more efficient to pedal faster in a lower gear or to work harder in a higher gear? I can see where I might be further along in distance with using the high gears, but my goal right now is to exercise, and not necessarily to get places faster. My handlebars seem awkward. I can’t as yet take my left hand off the handlebars to signal and wave and stuff. I remember when I was a kid, handlebars seemed a little shorter and a little less curved toward the grips. Maybe I ought to look at other sized handlebars. In case you’re interested: Along with my retro bike I went back to retro sneakers like US Keds. I find it easier to pedal with those than with today’s running sneakers. I’m looking forward to doing things on the bike I could do as a kid. I.e, mount by kicking right leg up over the seat; stand up to pedal for some oomph. Using the pannier baskets the way I did with my paper route. I could add to this some bike riding joys such as the running kick mount, and of course the “no hands” stunt as we were egged on by early TV commercials. One thing is a lot different than the old days. I definitely do NOT want to repeat some of the wrecks I had as a kid. I put much more value nowadays on my equipment, both human and bike. Thanks for listening. Riding is great. Bob |
Ads |
#2
|
|||
|
|||
older guy with 3-speed retro bike issues
On Jun 12, 10:19 pm, bob syr wrote:
My pedals have a bit of play; are they supposed to? I can pedal in all three gears without causing play as long as I’m propelling forward. It doesn’t really bother me too much although it did when I started. I’m wondering: should I try to fix the play in the pedals or leave well-enough alone? Is it more efficient to pedal faster in a lower gear or to work harder in a higher gear? I can see where I might be further along in distance with using the high gears, but my goal right now is to exercise, and not necessarily to get places faster. My handlebars seem awkward. I can’t as yet take my left hand off the handlebars to signal and wave and stuff. I remember when I was a kid, handlebars seemed a little shorter and a little less curved toward the grips. Maybe I ought to look at other sized handlebars. Pedals don't have much to get "play" in, so unless they're falling apart, I think you may mean that when you coast a bit, then pedal, there's some slack in the system before you can apply force. Is that right? It could mean there's a stuck clutch dog in the hub. Perhaps a flush and lube (or whatever, for an internal gear hub) is called for. Pedaling faster in a lower gear (but not too low) is better for your body, especially your knees. It's considered normal to want to keep your pedaling cadence up around 80-90 rpm (adjust for age, etc.) Bars of all shapes are available today, though if your bike is "experienced" rather than just looking retro, it might not be easy to find one that fit your stem, brakes, and shifter - newer ones are fatter. Check your local bike shop(s). Good luck, and keep riding! |
#3
|
|||
|
|||
older guy with 3-speed retro bike issues
On Thu, 12 Jun 2008 20:19:40 -0700 (PDT), bob syr
eventually got to the point: / Riding is great. Amen and welcome back. Your pedal play sounds to me like the normal kind of slack in a coaster brake. hub. More efficiency? You're looking to lose weight. Efficiency be damned unless you're talking about burning fat. LSD (long slow distance) is the formula for burning fat. Use all the gears it takes. For riding longer distances and getting more efficiency you might want to look at shoes with a stiffer sole than US Keds. A proper walking shoe or bike shoe are an improvement over gym shoes. Swapping around handlebars can get costly when you're having to replace cables and controls. Basically decide if your wrists are more comfortable with your thumbs pointed forward or towards the center. Prevent chaffing, heat exhaustion, sun stroke and dehydration. bon route. -- zk |
#4
|
|||
|
|||
older guy with 3-speed retro bike issues
"Brian Huntley" wrote in message
... It's considered normal to want to keep your pedaling cadence up around 80-90 rpm (adjust for age, etc.) 50-70rpm is probably a more reasonable expectation for someone in street clothes using flats on a cruiser with a 3 speed hub to go to the shops and back. An 80+ cadence without clips or cleats runs a fairly high risk of slipping off the pedal and is getting more into the sports or performance category of cycling I think. -- www.ozcableguy.com www.oztechnologies.com |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cannondale Issues An Important Safety Recall: Lefty Speed Carbon SL and Lefty Speed DLR2 Forks | â–€Slack | Mountain Biking | 0 | May 27th 07 11:07 PM |
Upating an older Dura Ace 8 Speed Cassette | Steve Koschmann | Techniques | 3 | May 19th 06 03:05 PM |
Older brifter (7 speed): How do I tell if for double or tripple? | Joe LoBuglio | Techniques | 17 | December 16th 05 04:54 PM |
Old 6-speed cassette issues | Paul Hobson | Techniques | 14 | October 10th 05 06:16 AM |
WTB: Older Dura Ace 6/7/8 Speed Crankset 175mm | Cjarani | Marketplace | 0 | October 26th 04 10:34 PM |