|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
In article ,
Zoot Katz wrote: Fri, 10 Sep 2004 07:01:21 -0700, , Ryan Cousineau wrote: Or better yet, scavenge it from a dumpster! And add spokes you found at a closing-out bicycle shop! And bearings recycled from some other wheel! Using tools you were given by your brother!* I recently donated a 20" rear wheel to OCB! that had sorta come from their own trash bin. It was tossed out as a front wheel with a slightly rusted chrome rim. I wanted the hub to make a matching pair of trailer wheels. So, I took it home stripped it and laced the rear hub I had into the cleaned-up rim, added a freewheel and gave it back. Cost me nothing except that Johan called me a "freak". Okay Zoot, you win this round. But all will bow before the Super Auto-Mini once I finish it! -- Ryan Cousineau, http://www.wiredcola.com Verus de parvis; verus de magnis. |
Ads |
#12
|
|||
|
|||
Ryan Cousineau wrote in message ...
Why is Princess Auto so cool? They sell everything from obsolete cell phone batteries to 75-ton hydraulic presses. And their metric hex wrench sets cost $3. My ears keep hearing that as "Princess Otto", and I get this strange image of a royal Austrian transvestite. But they are cools stores. Wish I had one nearby (downtown Toronto.) |
#13
|
|||
|
|||
Ryan Cousineau wrote:
Benjamin Lewis wrote: Ooh, very cool. Thanks for the heads-up; I'll definitely check it out. What exactly is "within riding distance"? About a mile. Princess Auto is a block from new Ikea. Notable hazards: you have to ride over the Brunette overpass. A map showing the location: http://princessauto.com/PAcountry.cf...&INF=loc&SPC=1 Thanks. Where is the Brunette overpass? I've ridden out along Lougheed highway past that location, and I don't seem to recall any hazardous overpasses. In fact, a number of our brevets have started very close to that location. It's about a 40-45 minute ride from my house at my speed, I believe. It should make a nice fixie ride. Latest incarnation of fixie: http://www.cs.sfu.ca/~bclewis/personal/bike/fixie9a.jpg http://www.cs.sfu.ca/~bclewis/person...e/fixie10a.jpg http://www.cs.sfu.ca/~bclewis/person...e/fixie11a.jpg http://www.cs.sfu.ca/~bclewis/person...e/fixie12a.jpg Changes: - "cowhorn" handle bars made from sawed-off drops. - cork tape started ****ing me off (ripping too easily), so I've replaced it with nylon lashing strap to which I applied shellac. Not as soft (rock-hard, in fact), but it sure looks nicer. - shorter (171mm!) Maxy cranks. - in a concession to safety, lights. -- Benjamin Lewis I regret to say that we of the FBI are powerless to act in cases of oral-genital intimacy, unless it has in some way obstructed interstate commerce. -- J. Edgar Hoover |
#14
|
|||
|
|||
In article ,
Benjamin Lewis wrote: Ryan Cousineau wrote: Benjamin Lewis wrote: Ooh, very cool. Thanks for the heads-up; I'll definitely check it out. What exactly is "within riding distance"? About a mile. Princess Auto is a block from new Ikea. Notable hazards: you have to ride over the Brunette overpass. A map showing the location: http://princessauto.com/PAcountry.cf...&INF=loc&SPC=1 Thanks. Where is the Brunette overpass? I've ridden out along Lougheed highway past that location, and I don't seem to recall any hazardous overpasses. That's the overpass that connects New Westminster and Coquitlam over the freeway. The prime hazard is the sheer volume of cars, moving at speed, and merging on and off. Not impassable by any means: I occasionally ride it on my commute, as part of an alternate route. It's the obvious route between Skytrain and Coquitlam (though I think there is an alternate back route). By bike, the directions to Princess Auto are easy: head east on Lougheed. take the first right after you pass Ikea, go just over a block further, and take the first right after you go under the freeway and over the railroad tracks. You're now at Princess Auto. In fact, a number of our brevets have started very close to that location. It's about a 40-45 minute ride from my house at my speed, I believe. It should make a nice fixie ride. Latest incarnation of fixie: http://www.cs.sfu.ca/~bclewis/personal/bike/fixie9a.jpg Changes: - "cowhorn" handle bars made from sawed-off drops. - cork tape started ****ing me off (ripping too easily), so I've replaced it with nylon lashing strap to which I applied shellac. Not as soft (rock-hard, in fact), but it sure looks nicer. - shorter (171mm!) Maxy cranks. - in a concession to safety, lights. The bike looks good. In the course of preparing a bike for sale, the prospective owner mentioned to me that she would have to wear gloves, as she was allergic to rubber (such as "cork" tape seems to consist of these days). I found the perfect solution in MEC's bins: cloth bar tape. Not much softer than shellac'd nylon, but a bit better. And it looks nice (it helped that the black cotton tape matched the black bike). What are you using for a rear hub? It looks like a standard freewheel hub with a bottom bracket lockring on the threads. Correct? -- Ryan Cousineau, http://www.wiredcola.com Verus de parvis; verus de magnis. |
#15
|
|||
|
|||
Ryan Cousineau wrote:
The bike looks good. In the course of preparing a bike for sale, the prospective owner mentioned to me that she would have to wear gloves, as she was allergic to rubber (such as "cork" tape seems to consist of these days). I found the perfect solution in MEC's bins: cloth bar tape. Not much softer than shellac'd I wondered how that was spelled, and then eventually contorted my sentence to avoid it altogether. nylon, but a bit better. Define "better" :P My theory is that I'll be able to keep the shellac-ed surface nice looking more easily and for longer. What are you using for a rear hub? It looks like a standard freewheel hub with a bottom bracket lockring on the threads. Correct? Yes, exactly. It's just some cheapo thing I found at OCB. -- Benjamin Lewis I regret to say that we of the FBI are powerless to act in cases of oral-genital intimacy, unless it has in some way obstructed interstate commerce. -- J. Edgar Hoover |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Chain skipping | Micheal Artindale | Mountain Biking | 17 | June 26th 04 12:56 AM |
Bike Stores Endangerd Because of Super Chain Stores? | James Lynx | General | 112 | June 5th 04 01:22 PM |
Trips for Kids 13th Annual Bike Swap & Sale | Marilyn Price | Techniques | 0 | June 1st 04 04:54 AM |
Trips for Kids 13th Annual Bike Swap & Sale | Marilyn Price | General | 0 | June 1st 04 04:52 AM |
Trips for Kids 13th Annual Bike Swap & Sale | Marilyn Price | Recumbent Biking | 0 | June 1st 04 04:49 AM |