Mavic Kysrium Equipe 2005 model

Has any run in to problems with this wheelset? I'm look for some
feedback before buying a set. Thanks.

Ben Spurgeon wrote:
Has any run in to problems with this wheelset? I'm look for some
feedback before buying a set. Thanks.

Crappy rear hub, along with the entire mavic line. For the $, why not
have a good wheelbuilder design and build a wheelset specifically for
you? Better wheels, better hubs by far, probably cheaper as well.

"Qui si parla Campagnolo" wrote in message
ups.com...
Crappy rear hub, along with the entire mavic line.
What's crappy about Mavic hubs? I'm not disagreeing, just curious about
your opinion.

BobT

BobT wrote:
"Qui si parla Campagnolo" wrote in message
ups.com...
Crappy rear hub, along with the entire mavic line.
What's crappy about Mavic hubs? I'm not disagreeing, just curious about
your opinion.

Actually, many years ago Mavic used to make these great hubs, light and
smooth and strong. I don't know how the hubs in the ksyriums are,
however, I would guess that they don't spin smoothly. A lot of the
wheelsets that are available now have rough spinning and poorly
adjusted hubs. You can probably rebuild the hub, but, why would you
spend a bunch of money on a wheel that has a poorly finished hub? For
the price of ksyriums, you can get dura ace or campy hubs, nice rims,
db or bladded spokes put together into a handbuilt wheel.

If you want one of those factory wheelsets, you can get some for under
$200. They are probably poorly finished and you'll have to touch them
up yourself, however, they are cheap. But the ksyriums cost way too
much.

Andres

wrote:
BobT wrote:
"Qui si parla Campagnolo" wrote in message
ups.com...
Crappy rear hub, along with the entire mavic line.
What's crappy about Mavic hubs? I'm not disagreeing, just curious about
your opinion.

Actually, many years ago Mavic used to make these great hubs, light and
smooth and strong. I don't know how the hubs in the ksyriums are,
however, I would guess that they don't spin smoothly. A lot of the
wheelsets that are available now have rough spinning and poorly
adjusted hubs. You can probably rebuild the hub, but, why would you
spend a bunch of money on a wheel that has a poorly finished hub? For
the price of ksyriums, you can get dura ace or campy hubs, nice rims,
db or bladded spokes put together into a handbuilt wheel.


I'll tell ya and BobT-They use a plastic bushing inside the freehub
body, at the bottom, that runs on a rubber seal. This gets the least
bit diry or dusty, the freehub doesn't 'freewheel' any longer. Needs a
Overhaul frequesntly. The Mavic rep suggested that we put in a .5mm
axle spacer on top of the axle stub, just under the freeehub body, to
lift it up a wee bit, and that helps a lot. This, along with spokes
bonded to 'nipples'(makes a NICE curly-que type thing, twisting),
makes me wonder why anybody spends the $ on these.