wanted - 20" heavy duty wheels.

I'm looking for at least 4 20" BMX type wheels with heavy axles -
either 14MM, or better yet 20mm through axles. Reasonable price,
preferably in Canada. Weight not a big issue.(Application has
cantelevered axle) prefer 4 the same, bur 2X2 may be acceptable(2
front, 2 rear or 4 front or 4 rear)

Waterloo Ontario.

--
Posted via a free Usenet account from http://www.teranews.com

Sounds like this is a special project. I have four 24" Velocity
Aeroheads, 36 spoke, laced to Phil Wood wheelchair Racing Hubs.No
dish. I think they take a 1/2 axle.I also have six Panaracer Pasela
tires, (24x1") tubes and rim strips. Everything is basically new. They
were used on a Soap Box Derby car and made approx a dozen runs.
Let me know if this sounds like something that might work for you.

On Jan 27, 12:16 pm, clare at snyder.on.ca wrote:
I'm looking for at least 4 20" BMX type wheels with heavy axles -
either 14MM, or better yet 20mm through axles. Reasonable price,
preferably in Canada. Weight not a big issue.(Application has
cantelevered axle) prefer 4 the same, bur 2X2 may be acceptable(2
front, 2 rear or 4 front or 4 rear)

Waterloo Ontario.

--
Posted via a free Usenet account fromhttp://www.teranews.com

On 27 Jan 2007 13:23:39 -0800, "
wrote:

Sounds like this is a special project. I have four 24" Velocity
Aeroheads, 36 spoke, laced to Phil Wood wheelchair Racing Hubs.No
dish. I think they take a 1/2 axle.I also have six Panaracer Pasela
tires, (24x1") tubes and rim strips. Everything is basically new. They
were used on a Soap Box Derby car and made approx a dozen runs.
Let me know if this sounds like something that might work for you.

Where are they, and what do you want for them? 20" is more to my
liking, and wider than 1" tires, but perhaps they could be used.

On Jan 27, 12:16 pm, clare at snyder.on.ca wrote:
I'm looking for at least 4 20" BMX type wheels with heavy axles -
either 14MM, or better yet 20mm through axles. Reasonable price,
preferably in Canada. Weight not a big issue.(Application has
cantelevered axle) prefer 4 the same, bur 2X2 may be acceptable(2
front, 2 rear or 4 front or 4 rear)

Waterloo Ontario.

--
Posted via a free Usenet account fromhttp://www.teranews.com


--
Posted via a free Usenet account from http://www.teranews.com

$300 for the four wheels and six tires & tubes.Plus actual shipping. I
am located in SW Florida.
The hubs were custom made by Phil Wood.


On Jan 27, 5:21 pm, clare at snyder.on.ca wrote:
On 27 Jan 2007 13:23:39 -0800, "

wrote:
Sounds like this is a special project. I have four 24" Velocity
Aeroheads, 36 spoke, laced to Phil Wood wheelchair Racing Hubs.No
dish. I think they take a 1/2 axle.I also have six Panaracer Pasela
tires, (24x1") tubes and rim strips. Everything is basically new. They
were used on a Soap Box Derby car and made approx a dozen runs.
Let me know if this sounds like something that might work for you.Where are they, and what do you want for them? 20" is more to my
liking, and wider than 1" tires, but perhaps they could be used.



On Jan 27, 12:16 pm, clare at snyder.on.ca wrote:
I'm looking for at least 4 20" BMX type wheels with heavy axles -
either 14MM, or better yet 20mm through axles. Reasonable price,
preferably in Canada. Weight not a big issue.(Application has
cantelevered axle) prefer 4 the same, bur 2X2 may be acceptable(2
front, 2 rear or 4 front or 4 rear)

Waterloo Ontario.

--
Posted via a free Usenet account fromhttp://www.teranews.com--
Posted via a free Usenet account fromhttp://www.teranews.com