Campy UT Crankset Question

Jean Pasquet wrote:
Bonjour,

Hank a écrit :

It changed in 2007 with the introduction of Ultra-Torque (UT), which
was what the original poster was asking about.

You are correct that the original aluminum compact Campy cranks were
regular 110mm - I have one of those, too - but that wasn't the
original poster's question.

OK for 2007.
Therefore, now, all cranks Campagnolo Compact are in 100/112.
But, rings for Centaur 2008 and Chorus therefore have to differ in form
and no compatibles!
Thank you !

And I thought only Shimano designed in incompatibility with existing
standards!

--
Tom Sherman - Holstein-Friesland Bovinia
The weather is here, wish you were beautiful

On Apr 13, 9:32*am, "David Peake" wrote:
Does the aluminum Centaur/Veloce UT crankset have that funky "campy only"
bolt pattern? *Or is that reserved only for the carbon cranksets?

Thank you.

Starting in 2007, all Campag double cranks are UT and hidden bolt and
all are the 110/112 BCD type. TA does make chainrings in this pattern,
BTW.

Bonjour,

Qui si parla Campagnolo-www.vecchios.com a écrit :
On Apr 13, 9:32*am, "David Peake" wrote:
Does the aluminum Centaur/Veloce UT crankset have that funky "campy only"
bolt pattern? *Or is that reserved only for the carbon cranksets?

Starting in 2007, all Campag double cranks are UT and hidden bolt and
all are the 110/112 BCD type. TA does make chainrings in this pattern,
BTW.

Yes
Chainrings in BCD 110/112 are TA Nerius, Campagnolo only.
But not Centaur !

--
Cordialement
Jean Pasquet
[On respecte un homme qui se respecte lui-même] Honoré de Balzac
(pour réponse, remettre les 3 voyelles de mon nom)

On Sat, 19 Apr 2008 06:24:15 -0700 (PDT), "Qui si parla
Campagnolo-www.vecchios.com" wrote:

On Apr 13, 9:32*am, "David Peake" wrote:
Does the aluminum Centaur/Veloce UT crankset have that funky "campy only"
bolt pattern? *Or is that reserved only for the carbon cranksets?

Thank you.

Starting in 2007, all Campag double cranks are UT and hidden bolt and
all are the 110/112 BCD type. TA does make chainrings in this pattern,
BTW.

Dear Peter,

Good to see you again!

Cheers,

Carl Fogel

On Apr 19, 12:15*pm, wrote:
On Sat, 19 Apr 2008 06:24:15 -0700 (PDT), "Qui si parla

Campagnolo-www.vecchios.com" wrote:
On Apr 13, 9:32*am, "David Peake" wrote:
Does the aluminum Centaur/Veloce UT crankset have that funky "campy only"
bolt pattern? *Or is that reserved only for the carbon cranksets?

Thank you.

Starting in 2007, all Campag double cranks are UT and hidden bolt and
all are the 110/112 BCD type. TA does make chainrings in this pattern,
BTW.

Dear Peter,

Good to see you again!

Cheers,

Carl Fogel

Test..we'll see what happens..For Mr Pasquet..'not Centaur', not sure
what you mean as these TA rings will fit onto any 2007/8 Campag UT CT
crank, including Centaur carbon and aluminum and Veloce and Mirage.

Bonjour,

Qui si parla Campagnolo-www.vecchios.com a écrit :

Test..we'll see what happens..For Mr Pasquet..'not Centaur', not sure
what you mean as these TA rings will fit onto any 2007/8 Campag UT CT
crank, including Centaur carbon and aluminum and Veloce and Mirage.

Centaur and underneath for 2008 has chainrings problem of which is at
the level of the thickness. Problem of fall of the chain between rings.
Otherwise, BCD 110/112 is good.

Record and Chorus work fine with TA Nerius.

--
Cordialement
Jean Pasquet
[On respecte un homme qui se respecte lui-même] Honoré de Balzac
(pour réponse, remettre les 3 voyelles de mon nom)