#21
|
|||
|
|||
Lowering a seat
For your reference, records indicate that
Ned Mantei wrote: My impression is that most people want to swing a leg over the saddle while standing. I'm not sure if this is so in your case, nor whether the following would help: My method is to push off with left foot on the pedal, coast a bit, and then swing my right leg over while standing on the left pedal. Another alternative mounting technique is to go forward over the top tube. I do it mainly when I have a crate strapped to my rack that comes up much higher than my seat, but the mechanics are different enough that I suspect that it might also help people who have hip/leg problems like the OP describes. And then there’s alway the “lay it on the ground and step over it” option. If the physical act of bending down to lift the bike is too much, maybe a strap or something could be used to hoist it up. -- "Also . . . I can kill you with my brain." River Tam, Trash, Firefly |
Ads |
#22
|
|||
|
|||
Lowering a seat
On Tue, 19 Jul 2016 13:36:40 -0400, Frank Krygowski
wrote: Due to stiffness in her hips, she's becoming unable to swing her leg over the saddle in its normal position. Is she grabbing her ankle or shin with her hand and lifting the foot over the saddle? I went through a long period of swearing that I was going to sew Madison handles into my socks, but it's automatic now. Also, always put the knee over first when mounting and the foot over first when dismounting. Laying the bike down is a great idea in theory, but in practice, it has to pass through your leg. -- joy beeson at comcast dot net http://wlweather.net/PAGEJOY/ The above message is a Usenet post. I don't recall having given anyone permission to use it on a Web site. |
#23
|
|||
|
|||
Lowering a seat
On Tuesday, July 19, 2016 at 12:36:45 PM UTC-5, Frank Krygowski wrote:
My wife's favorite bike, her Cannondale touring bike, is becoming unusable for her. Due to stiffness in her hips, she's becoming unable to swing her leg over the saddle in its normal position. The frame is not a step-through design like a mixte or "girl's bike," although the top tube is much lower than typical. I thought I might solve the problem with an ancient Hite Rite spring and quick release unit https://i0.wp.com/oi50.tinypic.com/124zyhi.jpg so she could come to a stop, then lower the saddle before swinging her leg over. But the seatpost motion is far too stiff. Despite several hours of effort to be sure there are no burrs, despite trying different lubricants, etc., the seatpost doesn't easily drop under her weight. I can try to locate a much softer spring, I suppose. But I wonder if anyone has come up with another solution, other than a multi-hundred-dollar dropper seatpost, or a new bike. Ideas, anyone? -- - Frank Krygowski The problem with a softer spring is it won't stay up while sitting on it. My folding bicycle (Mariner 7) came with a spring seat post. Held the seat up in the way, then sank when I sat on it bending my knee too much. But a folding bicycle could be a lot easier for her to drop the seat, stand over it, raise the seat, then ride. Some people's arthritis does improve if they eliminate inflammatory foods. Wheat and Dairy are the most problematic foods. http://www.wheatbellyblog.com/2015/0...y-lifestyle-2/ Another approach is to do the elimination diet. 2 weeks of chicken, carrots, and rice, then add 1 food every 3 days. http://familyonbikes.org/blog/2013/1...y-back-health/ |
#24
|
|||
|
|||
Lowering a seat
"Joerg" wrote in message ... On 2016-07-19 18:53, Frank Krygowski wrote: On 7/19/2016 8:35 PM, jbeattie wrote: [...] Frank, this is the big chance for your wife to jump to a Utopia Kranich. http://coolmainpress.com/AndreJute%27sUtopiaKranich.pdf There is no finer bike, and once fitted with a Rohloff Speedhub and chain-case, you will never have to do any maintenance of any kind, ever -- even if the bike is hit by a car. The car will require significant repairs, but not the bike. Trouble is, we keep our bikes in the basement. I'd have to hire help, or install a pulley system, to get that beast up the stairs. Which, I hasten to say, does not mean that it is the absolutely perfect bicycle, the standard by which all two wheeled vehicles should be judged. ;-) It's on sale but they only have the 5" version left: http://www.pricepoint.com/Brand/Grav...P-Seatpost.axd Someone was recently asking how to free a stuck splined seat post that can't twist - with one of those it would be fairly easy. Fix a couple of clamps, one near the top of the seat post and one on the frame collar. Join those with a metal hinged elbow, pull the middle joint away from the post and its free to bend and the seat lowers. Push the middle joint against the post and it can't go anywhere when weight is put on the seat. |
#25
|
|||
|
|||
Lowering a seat
On Tuesday, July 26, 2016 at 10:42:47 AM UTC-4, Mike A Schwab wrote:
On Tuesday, July 19, 2016 at 12:36:45 PM UTC-5, Frank Krygowski wrote: My wife's favorite bike, her Cannondale touring bike, is becoming unusable for her. Due to stiffness in her hips, she's becoming unable to swing her leg over the saddle in its normal position. The frame is not a step-through design like a mixte or "girl's bike," although the top tube is much lower than typical. I thought I might solve the problem with an ancient Hite Rite spring and quick release unit https://i0.wp.com/oi50.tinypic.com/124zyhi.jpg so she could come to a stop, then lower the saddle before swinging her leg over. But the seatpost motion is far too stiff. Despite several hours of effort to be sure there are no burrs, despite trying different lubricants, etc., the seatpost doesn't easily drop under her weight. I can try to locate a much softer spring, I suppose. But I wonder if anyone has come up with another solution, other than a multi-hundred-dollar dropper seatpost, or a new bike. Ideas, anyone? -- - Frank Krygowski The problem with a softer spring is it won't stay up while sitting on it. Perhaps I wasn't clear enough. I'm not trying to have a bouncy seatpost. The seatpost would be clamped in position using a quick release collar when riding. The clamp would be loosened only as (or after) she came to a stop. Then her weight would push the seatpost down into the seat tube, lowering the saddle so she could swing her leg over it. I'm still working on that possibility, BTW, looking for suitable springs. It needs to be strong enough to push the seatpost and saddle back up to the initial height when her weight is off the saddle, and not much stronger. My folding bicycle (Mariner 7) came with a spring seat post. Held the seat up in the way, then sank when I sat on it bending my knee too much. But a folding bicycle could be a lot easier for her to drop the seat, stand over it, raise the seat, then ride. She's been temporarily solving the problem by riding either her Bike Friday (which as a step-through frame) or by riding with me on the tandem. But she loves that Cannondale touring bike, so she's working on stretching exercises while I ponder retraction mechanisms. -- - Frank Krygowski |
#26
|
|||
|
|||
Lowering a seat
"Frank Krygowski" wrote in message ... On Tuesday, July 26, 2016 at 10:42:47 AM UTC-4, Mike A Schwab wrote: On Tuesday, July 19, 2016 at 12:36:45 PM UTC-5, Frank Krygowski wrote: My wife's favorite bike, her Cannondale touring bike, is becoming unusable for her. Due to stiffness in her hips, she's becoming unable to swing her leg over the saddle in its normal position. The frame is not a step-through design like a mixte or "girl's bike," although the top tube is much lower than typical. I thought I might solve the problem with an ancient Hite Rite spring and quick release unit https://i0.wp.com/oi50.tinypic.com/124zyhi.jpg so she could come to a stop, then lower the saddle before swinging her leg over. But the seatpost motion is far too stiff. Despite several hours of effort to be sure there are no burrs, despite trying different lubricants, etc., the seatpost doesn't easily drop under her weight. I can try to locate a much softer spring, I suppose. But I wonder if anyone has come up with another solution, other than a multi-hundred-dollar dropper seatpost, or a new bike. Ideas, anyone? -- - Frank Krygowski The problem with a softer spring is it won't stay up while sitting on it. Perhaps I wasn't clear enough. I'm not trying to have a bouncy seatpost. The seatpost would be clamped in position using a quick release collar when riding. I posted the solution yesterday - as yet there's no indication anyone took any notice. |
#27
|
|||
|
|||
Lowering a seat
On Wed, 27 Jul 2016 21:25:44 +0100, "Ian Field"
wrote: "Frank Krygowski" wrote in message ... On Tuesday, July 26, 2016 at 10:42:47 AM UTC-4, Mike A Schwab wrote: On Tuesday, July 19, 2016 at 12:36:45 PM UTC-5, Frank Krygowski wrote: My wife's favorite bike, her Cannondale touring bike, is becoming unusable for her. Due to stiffness in her hips, she's becoming unable to swing her leg over the saddle in its normal position. The frame is not a step-through design like a mixte or "girl's bike," although the top tube is much lower than typical. I thought I might solve the problem with an ancient Hite Rite spring and quick release unit https://i0.wp.com/oi50.tinypic.com/124zyhi.jpg so she could come to a stop, then lower the saddle before swinging her leg over. But the seatpost motion is far too stiff. Despite several hours of effort to be sure there are no burrs, despite trying different lubricants, etc., the seatpost doesn't easily drop under her weight. I can try to locate a much softer spring, I suppose. But I wonder if anyone has come up with another solution, other than a multi-hundred-dollar dropper seatpost, or a new bike. Ideas, anyone? -- - Frank Krygowski The problem with a softer spring is it won't stay up while sitting on it. Perhaps I wasn't clear enough. I'm not trying to have a bouncy seatpost. The seatpost would be clamped in position using a quick release collar when riding. I posted the solution yesterday - as yet there's no indication anyone took any notice. Which probably should give you some idea of how others perceive you. A nonentity? -- cheers, John B. |
#28
|
|||
|
|||
Lowering a seat
On 7/27/2016 4:25 PM, Ian Field wrote:
"Frank Krygowski" wrote in message ... On Tuesday, July 26, 2016 at 10:42:47 AM UTC-4, Mike A Schwab wrote: On Tuesday, July 19, 2016 at 12:36:45 PM UTC-5, Frank Krygowski wrote: My wife's favorite bike, her Cannondale touring bike, is becoming unusable for her. Due to stiffness in her hips, she's becoming unable to swing her leg over the saddle in its normal position. The frame is not a step-through design like a mixte or "girl's bike," although the top tube is much lower than typical. I thought I might solve the problem with an ancient Hite Rite spring and quick release unit https://i0.wp.com/oi50.tinypic.com/124zyhi.jpg so she could come to a stop, then lower the saddle before swinging her leg over. But the seatpost motion is far too stiff. Despite several hours of effort to be sure there are no burrs, despite trying different lubricants, etc., the seatpost doesn't easily drop under her weight. I can try to locate a much softer spring, I suppose. But I wonder if anyone has come up with another solution, other than a multi-hundred-dollar dropper seatpost, or a new bike. Ideas, anyone? -- - Frank Krygowski The problem with a softer spring is it won't stay up while sitting on it. Perhaps I wasn't clear enough. I'm not trying to have a bouncy seatpost. The seatpost would be clamped in position using a quick release collar when riding. I posted the solution yesterday - as yet there's no indication anyone took any notice. I saw your post and your solution. It was very nice, but it seemed to address a completely different problem. This bike does not have a stuck seatpost, splined or otherwise. -- - Frank Krygowski |
#29
|
|||
|
|||
Lowering a seat
"Frank Krygowski" wrote in message ... On 7/27/2016 4:25 PM, Ian Field wrote: "Frank Krygowski" wrote in message ... On Tuesday, July 26, 2016 at 10:42:47 AM UTC-4, Mike A Schwab wrote: On Tuesday, July 19, 2016 at 12:36:45 PM UTC-5, Frank Krygowski wrote: My wife's favorite bike, her Cannondale touring bike, is becoming unusable for her. Due to stiffness in her hips, she's becoming unable to swing her leg over the saddle in its normal position. The frame is not a step-through design like a mixte or "girl's bike," although the top tube is much lower than typical. I thought I might solve the problem with an ancient Hite Rite spring and quick release unit https://i0.wp.com/oi50.tinypic.com/124zyhi.jpg so she could come to a stop, then lower the saddle before swinging her leg over. But the seatpost motion is far too stiff. Despite several hours of effort to be sure there are no burrs, despite trying different lubricants, etc., the seatpost doesn't easily drop under her weight. I can try to locate a much softer spring, I suppose. But I wonder if anyone has come up with another solution, other than a multi-hundred-dollar dropper seatpost, or a new bike. Ideas, anyone? -- - Frank Krygowski The problem with a softer spring is it won't stay up while sitting on it. Perhaps I wasn't clear enough. I'm not trying to have a bouncy seatpost. The seatpost would be clamped in position using a quick release collar when riding. I posted the solution yesterday - as yet there's no indication anyone took any notice. I saw your post and your solution. It was very nice, but it seemed to address a completely different problem. This bike does not have a stuck seatpost, splined or otherwise. WTF!!!!! - you must be as thick as John.B! The idea would be irrelevant if the post was stuck. It would work best on a splined post that can't twist - but if you can get decent machine shop facilities, you can make the hinge arm rigid enough to limit twisting. |
#30
|
|||
|
|||
Lowering a seat
On 2016-07-26 19:39, Frank Krygowski wrote:
On Tuesday, July 26, 2016 at 10:42:47 AM UTC-4, Mike A Schwab wrote: On Tuesday, July 19, 2016 at 12:36:45 PM UTC-5, Frank Krygowski wrote: My wife's favorite bike, her Cannondale touring bike, is becoming unusable for her. Due to stiffness in her hips, she's becoming unable to swing her leg over the saddle in its normal position. The frame is not a step-through design like a mixte or "girl's bike," although the top tube is much lower than typical. I thought I might solve the problem with an ancient Hite Rite spring and quick release unit https://i0.wp.com/oi50.tinypic.com/124zyhi.jpg so she could come to a stop, then lower the saddle before swinging her leg over. But the seatpost motion is far too stiff. Despite several hours of effort to be sure there are no burrs, despite trying different lubricants, etc., the seatpost doesn't easily drop under her weight. I can try to locate a much softer spring, I suppose. But I wonder if anyone has come up with another solution, other than a multi-hundred-dollar dropper seatpost, or a new bike. Ideas, anyone? -- - Frank Krygowski The problem with a softer spring is it won't stay up while sitting on it. Perhaps I wasn't clear enough. I'm not trying to have a bouncy seatpost. The seatpost would be clamped in position using a quick release collar when riding. The clamp would be loosened only as (or after) she came to a stop. Then her weight would push the seatpost down into the seat tube, lowering the saddle so she could swing her leg over it. I'm still working on that possibility, BTW, looking for suitable springs. It needs to be strong enough to push the seatpost and saddle back up to the initial height when her weight is off the saddle, and not much stronger. My folding bicycle (Mariner 7) came with a spring seat post. Held the seat up in the way, then sank when I sat on it bending my knee too much. But a folding bicycle could be a lot easier for her to drop the seat, stand over it, raise the seat, then ride. She's been temporarily solving the problem by riding either her Bike Friday (which as a step-through frame) or by riding with me on the tandem. But she loves that Cannondale touring bike, so she's working on stretching exercises while I ponder retraction mechanisms. Post droppers don't work? I don't think they'll get much cheaper than this: https://www.amazon.com/Tmars-Mountai...dp/B00XYDPZL4/ -- Regards, Joerg http://www.analogconsultants.com/ |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
trouble lowering Cinelli stem | tonyfranciozi | Techniques | 6 | April 10th 07 02:34 AM |
Does lowering your tire pressure really help on wet roads? | Earl Bollinger | Techniques | 4 | November 10th 06 09:16 AM |
Thinkin about lowering my seat.. | NewKid | Unicycling | 7 | August 22nd 06 01:49 AM |
Seat Lowering? | Ohio Jerry | Recumbent Biking | 0 | February 15th 06 04:25 PM |
lowering a toptude on a luged frame? | bobblebob | UK | 5 | November 10th 03 12:47 PM |