|
|
Thread Tools | Display Modes |
#41
|
|||
|
|||
Problems with upper gears
On Fri, 13 Sep 2019 18:38:30 -0700 (PDT), AK
wrote: On Friday, September 13, 2019 at 8:11:47 PM UTC-5, John B. wrote: On Fri, 13 Sep 2019 17:14:05 -0700 (PDT), AK wrote: On Tuesday, September 10, 2019 at 7:57:26 PM UTC-5, AMuzi wrote: On 9/10/2019 5:39 PM, Tom Kunich wrote: On Sunday, September 8, 2019 at 2:17:40 PM UTC-7, AMuzi wrote: On 9/8/2019 3:13 PM, Sir Ridesalot wrote: On Sunday, 8 September 2019 10:35:43 UTC-4, AMuzi wrote: On 9/7/2019 3:00 PM, AK wrote: I recently had my rear derailleur replaced along with new shifters on a 18 speed mountain bike. Shifting in the lower gears is smooth and there is no noise when pedaling. I can shift smoothly into all gears however, there is a "clicking" sound when I am in the upper gears. The bike tech who did the work said he could not find a seven speed shifter and installed an eight speed shifter and told me he would make adjustments so it would work. I have been told this. "It is a problem, but can be fixed by also replacing the freewheel, but I definitely wouldn't be paying for any service from a tech who didn't know this would be a problem." https://imgur.com/a/xF73i91 https://imgur.com/a/5VB6gat The 8 shifter is compatible. Common problems include cable/casing/ferrule issues and rear changer misalignment. It ought to shift well and quietly with all new equipment. This has a new seven chain, new FW and new cable/casing right? Since when is an 8-speed shifter compatible with a 6-speed cassette or freewheel? Cheers Yikes. You're right. I missed that. If it's still a SIX freewheel, there's no way that shifter could work. And by the way, WTF? Six shifters are cheap and plentiful. As are Sevens. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 Didn't 6,7 and 8 all have the same spacing? So that you could use a 8 spd shifter on a 6 speed? I would turn my daughter's 6 speed downtube shifter to friction and let her shift the 8 until I found some brifters. 7 & 8 are very similar. Six is not even close and spacing is visually so different I can't believe anyone would even try it. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 The new 6-speed shifter will not be in till next week for the change out, so I am still using a SunRace 8 speed index shifter with a 6-speed freewheel. Today my bike started acting strangely. It would start being harder to pedal when in several of the lower gears. I had to stop several times to loosen the derailleur a little to get home. Could that possibly be caused by having an 8-speed shifter with a 6 speed freewheel? Andy Why don't you sit down an look at the rear derailer. Move the shifter and look what happens. If you have the correct shifter to match the derailer and rear wheel sprockets then every time you click the shifter the derailer will move to line up with the next rear wheel sprocket. If the shifter, derailer, rear wheel sprockets are not matched it won't line up and the more you move it the worse the misalignment gets. It is not rocket science! -- cheers, John B. You might want to read posts more carefully. Key words are "8-speed shifter" and "6-speed freewheel." :-) Andy And my "key words" were "and If the shifter, derailer, rear wheel sprockets are not matched it won't line up". (and from what I read, it didn't :-) -- cheers, John B. |
Ads |
#42
|
|||
|
|||
Problems with upper gears
On Friday, 13 September 2019 20:14:08 UTC-4, AK wrote:
On Tuesday, September 10, 2019 at 7:57:26 PM UTC-5, AMuzi wrote: On 9/10/2019 5:39 PM, Tom Kunich wrote: On Sunday, September 8, 2019 at 2:17:40 PM UTC-7, AMuzi wrote: On 9/8/2019 3:13 PM, Sir Ridesalot wrote: On Sunday, 8 September 2019 10:35:43 UTC-4, AMuzi wrote: On 9/7/2019 3:00 PM, AK wrote: I recently had my rear derailleur replaced along with new shifters on a 18 speed mountain bike. Shifting in the lower gears is smooth and there is no noise when pedaling. I can shift smoothly into all gears however, there is a "clicking" sound when I am in the upper gears. The bike tech who did the work said he could not find a seven speed shifter and installed an eight speed shifter and told me he would make adjustments so it would work. I have been told this. "It is a problem, but can be fixed by also replacing the freewheel, but I definitely wouldn't be paying for any service from a tech who didn't know this would be a problem." https://imgur.com/a/xF73i91 https://imgur.com/a/5VB6gat The 8 shifter is compatible. Common problems include cable/casing/ferrule issues and rear changer misalignment. It ought to shift well and quietly with all new equipment. This has a new seven chain, new FW and new cable/casing right? Since when is an 8-speed shifter compatible with a 6-speed cassette or freewheel? Cheers Yikes. You're right. I missed that. If it's still a SIX freewheel, there's no way that shifter could work. And by the way, WTF? Six shifters are cheap and plentiful. As are Sevens. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 Didn't 6,7 and 8 all have the same spacing? So that you could use a 8 spd shifter on a 6 speed? I would turn my daughter's 6 speed downtube shifter to friction and let her shift the 8 until I found some brifters. 7 & 8 are very similar. Six is not even close and spacing is visually so different I can't believe anyone would even try it. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 The new 6-speed shifter will not be in till next week for the change out, so I am still using a SunRace 8 speed index shifter with a 6-speed freewheel. Today my bike started acting strangely. It would start being harder to pedal when in several of the lower gears. I had to stop several times to loosen the derailleur a little to get home.. Could that possibly be caused by having an 8-speed shifter with a 6 speed freewheel? Andy An 8-speed shifter will not work with a 6-speed cluster unless the 8-speed shifter has a FRICTION option as well as he index one. Can you post a link to an image of your rear 8-speed shifter? Perhaps then we can tell you if it has that needed friction option. I wish I'd looked in my parts boxes earlier in this thread as I found some 6-speed twist-grip shifters in it. I'd send you one gratis if you hadn't already ordered one. Cheers |
#43
|
|||
|
|||
Problems with upper gears
On Saturday, September 14, 2019 at 2:28:18 AM UTC-5, Sir Ridesalot wrote:
On Friday, 13 September 2019 20:14:08 UTC-4, AK wrote: On Tuesday, September 10, 2019 at 7:57:26 PM UTC-5, AMuzi wrote: On 9/10/2019 5:39 PM, Tom Kunich wrote: On Sunday, September 8, 2019 at 2:17:40 PM UTC-7, AMuzi wrote: On 9/8/2019 3:13 PM, Sir Ridesalot wrote: On Sunday, 8 September 2019 10:35:43 UTC-4, AMuzi wrote: On 9/7/2019 3:00 PM, AK wrote: I recently had my rear derailleur replaced along with new shifters on a 18 speed mountain bike. Shifting in the lower gears is smooth and there is no noise when pedaling. I can shift smoothly into all gears however, there is a "clicking" sound when I am in the upper gears. The bike tech who did the work said he could not find a seven speed shifter and installed an eight speed shifter and told me he would make adjustments so it would work. I have been told this. "It is a problem, but can be fixed by also replacing the freewheel, but I definitely wouldn't be paying for any service from a tech who didn't know this would be a problem." https://imgur.com/a/xF73i91 https://imgur.com/a/5VB6gat The 8 shifter is compatible. Common problems include cable/casing/ferrule issues and rear changer misalignment. It ought to shift well and quietly with all new equipment. This has a new seven chain, new FW and new cable/casing right? Since when is an 8-speed shifter compatible with a 6-speed cassette or freewheel? Cheers Yikes. You're right. I missed that. If it's still a SIX freewheel, there's no way that shifter could work. And by the way, WTF? Six shifters are cheap and plentiful. As are Sevens. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 Didn't 6,7 and 8 all have the same spacing? So that you could use a 8 spd shifter on a 6 speed? I would turn my daughter's 6 speed downtube shifter to friction and let her shift the 8 until I found some brifters. 7 & 8 are very similar. Six is not even close and spacing is visually so different I can't believe anyone would even try it. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 The new 6-speed shifter will not be in till next week for the change out, so I am still using a SunRace 8 speed index shifter with a 6-speed freewheel. Today my bike started acting strangely. It would start being harder to pedal when in several of the lower gears.. I had to stop several times to loosen the derailleur a little to get home. Could that possibly be caused by having an 8-speed shifter with a 6 speed freewheel? Andy An 8-speed shifter will not work with a 6-speed cluster unless the 8-speed shifter has a FRICTION option as well as he index one. Can you post a link to an image of your rear 8-speed shifter? Perhaps then we can tell you if it has that needed friction option. I wish I'd looked in my parts boxes earlier in this thread as I found some 6-speed twist-grip shifters in it. I'd send you one gratis if you hadn't already ordered one. Cheers Thanks for the offer. I am getting a 6-speed shifter. It will not cost me anything. Shimano Tourney Tx50 3x6-speed Thumb Shifter Set Andy I got this feedback. If you noticed the chain chattering on the sprocket, then yes, it could be caused by using an 8-speed shifter with a 6-speed freewheel. With indexed shifting, all the drivetrain parts are designed to work together, and if you've got a mismatch--as you do here--you can expect the shifter to pull the chain out of alignment with the sprocket. |
#44
|
|||
|
|||
Problems with upper gears
On Saturday, 14 September 2019 10:23:28 UTC-4, AK wrote:
On Saturday, September 14, 2019 at 2:28:18 AM UTC-5, Sir Ridesalot wrote: On Friday, 13 September 2019 20:14:08 UTC-4, AK wrote: On Tuesday, September 10, 2019 at 7:57:26 PM UTC-5, AMuzi wrote: On 9/10/2019 5:39 PM, Tom Kunich wrote: On Sunday, September 8, 2019 at 2:17:40 PM UTC-7, AMuzi wrote: On 9/8/2019 3:13 PM, Sir Ridesalot wrote: On Sunday, 8 September 2019 10:35:43 UTC-4, AMuzi wrote: On 9/7/2019 3:00 PM, AK wrote: I recently had my rear derailleur replaced along with new shifters on a 18 speed mountain bike. Shifting in the lower gears is smooth and there is no noise when pedaling. I can shift smoothly into all gears however, there is a "clicking" sound when I am in the upper gears. The bike tech who did the work said he could not find a seven speed shifter and installed an eight speed shifter and told me he would make adjustments so it would work. I have been told this. "It is a problem, but can be fixed by also replacing the freewheel, but I definitely wouldn't be paying for any service from a tech who didn't know this would be a problem." https://imgur.com/a/xF73i91 https://imgur.com/a/5VB6gat The 8 shifter is compatible. Common problems include cable/casing/ferrule issues and rear changer misalignment. It ought to shift well and quietly with all new equipment. This has a new seven chain, new FW and new cable/casing right? Since when is an 8-speed shifter compatible with a 6-speed cassette or freewheel? Cheers Yikes. You're right. I missed that. If it's still a SIX freewheel, there's no way that shifter could work. And by the way, WTF? Six shifters are cheap and plentiful. As are Sevens. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 Didn't 6,7 and 8 all have the same spacing? So that you could use a 8 spd shifter on a 6 speed? I would turn my daughter's 6 speed downtube shifter to friction and let her shift the 8 until I found some brifters. 7 & 8 are very similar. Six is not even close and spacing is visually so different I can't believe anyone would even try it. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 The new 6-speed shifter will not be in till next week for the change out, so I am still using a SunRace 8 speed index shifter with a 6-speed freewheel. Today my bike started acting strangely. It would start being harder to pedal when in several of the lower gears. I had to stop several times to loosen the derailleur a little to get home. Could that possibly be caused by having an 8-speed shifter with a 6 speed freewheel? Andy An 8-speed shifter will not work with a 6-speed cluster unless the 8-speed shifter has a FRICTION option as well as he index one. Can you post a link to an image of your rear 8-speed shifter? Perhaps then we can tell you if it has that needed friction option. I wish I'd looked in my parts boxes earlier in this thread as I found some 6-speed twist-grip shifters in it. I'd send you one gratis if you hadn't already ordered one. Cheers Thanks for the offer. I am getting a 6-speed shifter. It will not cost me anything. Shimano Tourney Tx50 3x6-speed Thumb Shifter Set Andy I got this feedback. If you noticed the chain chattering on the sprocket, then yes, it could be caused by using an 8-speed shifter with a 6-speed freewheel. With indexed shifting, all the drivetrain parts are designed to work together, and if you've got a mismatch--as you do here--you can expect the shifter to pull the chain out of alignment with the sprocket. I liked the 7-speed Tourney thmb-shifters I put on my sister's bike a number of years ago,. What was nice about them was that the rear shifter could also be set to index mode. I think the friction mode has been dropped on newer ones. I think you'll really like your new Tourney 6-speed thumb shifters. Sometimes I wonder if by anchoring the cable onto a rear derailleur differently than the norms position sort of like people do with hubbub cable routing, if it'd be possible to get an 8-speed shifter to work with a 6-speed cogset. Hmm, something to play with sometime this winter when I'm bored and the weather is too nasty for safe bicycling. Good luck, enjoy the new shifters when you get them mounted, and cheers. |
#45
|
|||
|
|||
Problems with upper gears
On Wednesday, September 11, 2019 at 5:53:14 AM UTC-5, Sir Ridesalot wrote:
On Wednesday, 11 September 2019 06:00:38 UTC-4, AK wrote: On Wednesday, September 11, 2019 at 2:03:59 AM UTC-5, Sir Ridesalot wrote: On Wednesday, 11 September 2019 02:29:21 UTC-4, AK wrote: Your changing answers are very humorous and have made me smile. Just a friendly suggestion. You might want to re- read my posts. Have a great evening. Andy What changing answers? You said you took a bike with a six speed cluster in for repairs and that the shop put on an 8-speed shifter after which you had trouble shifting. Both myself and Andrew Muzi told you that an 8-speed shifter won't work on a 6-speed cluster. I've been asking you if your previous shifter was indexed and if this new shifter has a friction mode. That's because I was trying to save you some money since an 8-speed shifter with a friction mode WILL shift a 6-speed cluster but NOT IN INDEX MODE. Sometimes you just can't help people. I'm done. Good luck. Cheers I appreciate your trying to save me money, but the upgrade to an 8 speed freewheel will cost me nothing. So to recap. For $60 I have spent, my mountain bike will have... New chain New indexed shifters New freewheel Andy An EIGHT speed freewheel? Get ready to enjoy bent or broken rear axles. There's an AWFUL LOT OF OVERHANG on an 8-speed freewheel between the drive side cone and the end of the axle. That's the MAIN reason why FREEHUBS and CASSETTES were invented and became popular. Even with 7-speed freewheels there were a lot of bent or broken rear axles and that's not counting if the axle was a cheap one in the first place. Good luck as I'm sure you're going to need it. Don't do any rough riding like hitting potholes whilst still seated, or riding off of curbs. Cheers I ended up getting the 8 speed freewheel over a month ago. I have had ZERO problems. I am enjoying the extra 6 speeds. Andy |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Standing + Big Gears Always = Knee Problems? | (PeteCresswell) | General | 6 | April 7th 06 08:56 PM |
Standing + Big Gears Always = Knee Problems? | (PeteCresswell) | Techniques | 6 | April 7th 06 08:56 PM |
Standing + Big Gears Always = Knee Problems? | [email protected] | Techniques | 2 | April 5th 06 04:50 PM |
Standing + Big Gears Always = Knee Problems? | fred | Techniques | 1 | April 4th 06 11:40 PM |
Standing + Big Gears Always = Knee Problems? | [email protected] | General | 0 | April 4th 06 02:59 AM |