|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
How do you print frame transfers?
Hi there,
I was hoping someone had been through this process and could offer some advice. I'm fine with the design side on the pc. I'm interested to know how my designs could be printed on some suitable material that I can pass on to my frame refinisher. Can I take a jpeg or other similar format to a print shop on the high street and have them printed on a sheet of A4 for a few quid? Or am I limited to a specialist of some sort? I was quoted over the phone, "about £20", from the refinisher which I thought was a bit steep. I might only need transfers for the down tube I haven't decided yet. The frame in question is a Claud Butler Dalesman. I'm aware of H. Lloyd http://tinyurl.com/jbwer who stocks original or reproduced transfers, who I may return to. I'd be grateful of any useful advice. -- Callaghan |
#2
|
|||
|
|||
How do you print frame transfers?
"Callaghan" wrote in message ... Hi there, I was hoping someone had been through this process and could offer some advice. I'm fine with the design side on the pc. I'm interested to know how my designs could be printed on some suitable material that I can pass on to my frame refinisher. Can I take a jpeg or other similar format to a print shop on the high street and have them printed on a sheet of A4 for a few quid? Or am I limited to a specialist of some sort? I was quoted over the phone, "about £20", from the refinisher which I thought was a bit steep. I might only need transfers for the down tube I haven't decided yet. The frame in question is a Claud Butler Dalesman. I'm aware of H. Lloyd http://tinyurl.com/jbwer who stocks original or reproduced transfers, who I may return to. I'd be grateful of any useful advice. -- Callaghan I bought a frame from here and they do transfers but I haven't tried them. www.becsbikes.tk pretty reasonably priced. cheers Jon_H P.S. I don't actually know the person and cannot guarantee the workmanship as I have never tried them myself. |
#3
|
|||
|
|||
How do you print frame transfers?
"Jon_H" wrote in message ... "Callaghan" wrote in message ... Hi there, I was hoping someone had been through this process and could offer some advice. I'm fine with the design side on the pc. I'm interested to know how my designs could be printed on some suitable material that I can pass on to my frame refinisher. Can I take a jpeg or other similar format to a print shop on the high street and have them printed on a sheet of A4 for a few quid? Or am I limited to a specialist of some sort? I was quoted over the phone, "about £20", from the refinisher which I thought was a bit steep. I might only need transfers for the down tube I haven't decided yet. The frame in question is a Claud Butler Dalesman. I'm aware of H. Lloyd http://tinyurl.com/jbwer who stocks original or reproduced transfers, who I may return to. I'd be grateful of any useful advice. -- Callaghan I bought a frame from here and they do transfers but I haven't tried them. www.becsbikes.tk pretty reasonably priced. cheers Jon_H P.S. I don't actually know the person and cannot guarantee the workmanship as I have never tried them myself. cancel that last URL unless you really want to view the casino advert try this one instead. http://us.share.geocities.com/becs_bikes/products.pdf I should have checked before inflicting upon the group cheers Jon_H |
#4
|
|||
|
|||
How do you print frame transfers?
Callaghan wrote: Hi there, I was hoping someone had been through this process and could offer some advice. I'm fine with the design side on the pc. I'm interested to know how my designs could be printed on some suitable material that I can pass on to my frame refinisher. Can I take a jpeg or other similar format to a print shop on the high street and have them printed on a sheet of A4 for a few quid? Or am I limited to a specialist of some sort? I was quoted over the phone, "about £20", from the refinisher which I thought was a bit steep. I might only need transfers for the down tube I haven't decided yet. The frame in question is a Claud Butler Dalesman. I'm aware of H. Lloyd http://tinyurl.com/jbwer who stocks original or reproduced transfers, who I may return to. I'd be grateful of any useful advice. email me and I'll let you know what I can do for a small fee. I've done quite a few for others on the newsgroups |
#5
|
|||
|
|||
How do you print frame transfers?
Pete Whelan wrote:
email me and I'll let you know what I can do for a small fee. I've done quite a few for others on the newsgroups - Including me. I like these vinyl stickers /more/ than the professional type of transfers new bikes come with. Just out of curisoity, Pete, what sort of device do you use and how much would one cost? I know nothing about these things. I'm guessing it's like a printer but with a lazer cutting thing? ~PB |
#6
|
|||
|
|||
How do you print frame transfers?
Pete Biggs wrote: Pete Whelan wrote: email me and I'll let you know what I can do for a small fee. I've done quite a few for others on the newsgroups - Including me. I like these vinyl stickers /more/ than the professional type of transfers new bikes come with. Just out of curisoity, Pete, what sort of device do you use and how much would one cost? I know nothing about these things. I'm guessing it's like a printer but with a lazer cutting thing? ~PB Peter, It's a Roland vinyl cutter, with a roller for the 'Y' and a moving head for the 'X' directions. A bit like a pen plotter. The cutting is by a pin prick of a blade that rotates as the direction of cut changes. £500 is about the cheapest they come (+VAt, + getting loads of vinyl, etc) |
#7
|
|||
|
|||
How do you print frame transfers?
On Sat, 16 Sep 2006 13:11:35 +0100, Pete Whelan wrote:
Callaghan wrote: I'd be grateful of any useful advice. email me and I'll let you know what I can do for a small fee. I've done quite a few for others on the newsgroups That's a great offer that I'll keep in mind for the future. I've decided to go with the originals from H. Lloyd for peace of mind on this occasion. I couldn't stand the suspense waiting (two week turnaround) to see if my design worked. Yes, okay, I've clucked :-) -- Callaghan |
#8
|
|||
|
|||
How do you print frame transfers?
|
#9
|
|||
|
|||
How do you print frame transfers?
Callaghan Wrote: Hi there, I was hoping someone had been through this process and could offer some advice. I'm fine with the design side on the pc. I'm interested to know how my designs could be printed on some suitable material that I can pass on to my frame refinisher. Can I take a jpeg or other similar format to a print shop on the high street and have them printed on a sheet of A4 for a few quid? Or am I limited to a specialist of some sort? I was quoted over the phone, "about £20", from the refinisher which I thought was a bit steep. I might only need transfers for the down tube I haven't decided yet. The frame in question is a Claud Butler Dalesman. I'm aware of H. Lloyd http://tinyurl.com/jbwer who stocks original or reproduced transfers, who I may return to. I'd be grateful of any useful advice. -- CallaghanYou can buy decal paper (from hobby-shops) and run it through an ink-jet but the ink will probably fade especially on something like a bike which gets a fair bit of UV exposure. There are also specialists who can do a better job,but for a single set of decals the cost is likely to be prohibitive. The cost of "original" decals is outrageous but you may have to bite the bullet on this one and go with your frame refinisher.At least you know that the decals will be compatible with the finish. -- stevebaby |
#10
|
|||
|
|||
How do you print frame transfers?
In article
Callaghan wrote: Hi there, I was hoping someone had been through this process and could offer some advice. I'm fine with the design side on the pc. I'm interested to know how my designs could be printed on some suitable material that I can pass on to my frame refinisher. Can I take a jpeg or other similar format to a print shop on the high street and have them printed on a sheet of A4 for a few quid? Or am I limited to a specialist of some sort? You can get adhesive polyester film or waterslip transfer paper, which can be laser printed (the waterslip will need a lacquer overcoat). The only problem with these is that it doesn't seem to be easy to buy a single A4 sheet. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Road Frame Closeouts (ad) | John Dacey | Marketplace | 0 | November 16th 05 09:22 PM |
Autofaq now on faster server | Simon Brooke | UK | 216 | April 1st 05 10:09 AM |
FAQ | Just zis Guy, you know? | UK | 27 | September 5th 03 10:58 PM |
Is my frame salvagable? | john_childs | Unicycling | 5 | August 14th 03 11:16 AM |