|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Identify Sugino crank, circa 1999
I had a left crank arm crack and would like to get an exact
replacement if possible. It's square taper, Sugino, 175mm long and has on the inside: MI2 3 Any ideas? |
Ads |
#2
|
|||
|
|||
Identify Sugino crank, circa 1999
somebody wrote:
I had a left crank arm crack and would like to get an exact replacement if possible. *It's square taper, Sugino, 175mm long and has on the inside: * * MI2 * * * 3 Any ideas? Why do you want an exact match? It's not like it matches the other side, anyway. In the past, I've bought Sugino cranksets boxed together that did not appear to match. Look for something that has the same length, lateral offset, and surface finish as your right crank. Chalo |
#3
|
|||
|
|||
Identify Sugino crank, circa 1999
On Feb 1, 9:05*pm, somebody wrote:
I had a left crank arm crack and would like to get an exact replacement if possible. *It's square taper, Sugino, 175mm long and has on the inside: * * MI2 * * * 3 Any ideas? You might get lucky at a bicycle shop in their used parts bin(s) or, if there's one in your area, at a bicycle co-op. I have a few old Sugino cranksets but they are from the 1980's. I like them because with a moder bottom bracket the Q-factor is much narrower than the newer cranksets. Good luck and cheers |
#4
|
|||
|
|||
Identify Sugino crank, circa 1999
On Thu, 2 Feb 2012 08:37:40 -0800 (PST), Sir Ridesalot
wrote: On Feb 1, 9:05*pm, somebody wrote: I had a left crank arm crack and would like to get an exact replacement if possible. *It's square taper, Sugino, 175mm long and has on the inside: * * MI2 * * * 3 Any ideas? You might get lucky at a bicycle shop in their used parts bin(s) or, if there's one in your area, at a bicycle co-op. I have a few old Sugino cranksets but they are from the 1980's. I like them because with a moder bottom bracket the Q-factor is much narrower than the newer cranksets. Good luck and cheers The LBS has a cheap one from Taiwan that just looks bulky and not as nice. But the price is right. |
#5
|
|||
|
|||
Identify Sugino crank, circa 1999
On Feb 3, 3:07*am, somebody wrote:
On Thu, 2 Feb 2012 08:37:40 -0800 (PST), Sir Ridesalot wrote: On Feb 1, 9:05*pm, somebody wrote: I had a left crank arm crack and would like to get an exact replacement if possible. *It's square taper, Sugino, 175mm long and has on the inside: * * MI2 * * * 3 Any ideas? You might get lucky at a bicycle shop in their used parts bin(s) or, if there's one in your area, at a bicycle co-op. I have a few old Sugino cranksets but they are from the 1980's. I like them because with a moder bottom bracket the Q-factor is much narrower than the newer cranksets. Good luck and cheers The LBS has a cheap one from Taiwan that just looks bulky and not as nice. *But the price is right. have you checked ebay. |
#6
|
|||
|
|||
Identify Sugino crank, circa 1999
On Feb 3, 10:07*am, somebody wrote:
On Thu, 2 Feb 2012 08:37:40 -0800 (PST), Sir Ridesalot wrote: On Feb 1, 9:05*pm, somebody wrote: I had a left crank arm crack and would like to get an exact replacement if possible. *It's square taper, Sugino, 175mm long and has on the inside: * * MI2 * * * 3 Any ideas? You might get lucky at a bicycle shop in their used parts bin(s) or, if there's one in your area, at a bicycle co-op. I have a few old Sugino cranksets but they are from the 1980's. I like them because with a moder bottom bracket the Q-factor is much narrower than the newer cranksets. Good luck and cheers The LBS has a cheap one from Taiwan that just looks bulky and not as nice. *But the price is right. Price means F'all go with your instinct, the subconcious holds many secrets around which SCIENCE has no understanding. |
#7
|
|||
|
|||
Identify Sugino crank, circa 1999
On Feb 3, 4:16*pm, thirty-six wrote:
On Feb 3, 10:07*am, somebody wrote: On Thu, 2 Feb 2012 08:37:40 -0800 (PST), Sir Ridesalot wrote: On Feb 1, 9:05*pm, somebody wrote: I had a left crank arm crack and would like to get an exact replacement if possible. *It's square taper, Sugino, 175mm long and has on the inside: * * MI2 * * * 3 Any ideas? You might get lucky at a bicycle shop in their used parts bin(s) or, if there's one in your area, at a bicycle co-op. I have a few old Sugino cranksets but they are from the 1980's. I like them because with a moder bottom bracket the Q-factor is much narrower than the newer cranksets. Good luck and cheers The LBS has a cheap one from Taiwan that just looks bulky and not as nice. *But the price is right. Price means F'all *go with your instinct, the subconcious holds many secrets around which SCIENCE has no understanding. p.s. paying less than good value can be haunting, unless of course it is at an agreed auction (not a bailiff's fund management). |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help!! Please!! Sugino Crank problem | Campag_nut | Australia | 4 | April 16th 07 12:13 PM |
FS: Sugino Triple Crank & BB | zteam | Marketplace | 0 | December 3rd 05 04:39 PM |
FS: Sugino XD Triple Crank | zteam | Marketplace | 0 | October 31st 05 04:06 PM |
Sugino XD Triple Crank with New BB | zteam | Marketplace | 0 | August 6th 05 07:53 PM |
Sugino LH Crank | Julian | UK | 2 | February 11th 04 08:06 AM |