|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Any Success Replacing Pads in Shorts?
Some of my pretty old Castelli, Progetto-Y bib shorts and knickers with
the perforated, red, synthetic leather pad are suffering from the slow demise of the pad. The synthetic leater begins to split between adjacent perforations in the areas most flexed and riding with this leads to chaffing in sensitive areas. The garments themselves are in pretty decent shape. Only the pad is troublesome. So the question is: anyone have any success in getting the pads replaced in their lycra shorts? I see that these http://store.aerotechdesigns.com/rebishchcrpa.html folks offer individual pads for replacement use. And I see that Kucharik http://www.kucharikclothing.com/repairs.php offers both individual pads and a service to perform the replacement. Perhaps there are others too? Has anyone had any experience and can shed some light onto how feasible this all is? Thanks |
Ads |
#2
|
|||
|
|||
Any Success Replacing Pads in Shorts?
TAKE A LOOK AT NEOPRENE maybe from Sweet Composites.
also workable - cover saddle with a plastic grocery bag. |
#3
|
|||
|
|||
Any Success Replacing Pads in Shorts?
On Oct 1, 5:01*pm, David White wrote:
Some of my pretty old Castelli, Progetto-Y bib shorts and knickers with the perforated, red, synthetic leather pad are suffering from the slow demise of the pad. The synthetic leater begins to split between adjacent perforations in the areas most flexed and riding with this leads to chaffing in sensitive areas. The garments themselves are in pretty decent shape. Only the pad is troublesome. So the question is: anyone have any success in getting the pads replaced in their lycra shorts? I see that these http://store.aerotechdesigns.com/rebishchcrpa.html folks offer individual pads for replacement use. And I see that Kucharik http://www.kucharikclothing.com/repairs.php offers both individual pads and a service to perform the replacement. Perhaps there are others too? Has anyone had any experience and can shed some light onto how feasible this all is? Thanks try neoprene maybe from SWEET COMPOSITES try covering saddle with plastic grocery bag and neo if tried with a similar slippery material. slipperiness works as well as softness maybe better. |
#4
|
|||
|
|||
Any Success Replacing Pads in Shorts?
On Oct 1, 5:01 pm, David White wrote:
Some of my pretty old Castelli, Progetto-Y bib shorts and knickers with the perforated, red, synthetic leather pad are suffering from the slow demise of the pad. The synthetic leater begins to split between adjacent perforations in the areas most flexed and riding with this leads to chaffing in sensitive areas. The garments themselves are in pretty decent shape. Only the pad is troublesome. So the question is: anyone have any success in getting the pads replaced in their lycra shorts? I see that these http://store.aerotechdesigns.com/rebishchcrpa.html folks offer individual pads for replacement use. And I see that Kucharik http://www.kucharikclothing.com/repairs.php offers both individual pads and a service to perform the replacement. Perhaps there are others too? Has anyone had any experience and can shed some light onto how feasible this all is? I have a couple pair of Nashbar shorts where the pad edge split about 1/2 cm at perimeter stitches. Then these splits would nip at my inner thighs like the sharp pincers of ants in my pants - very bothersome. Don't know if this fits the nature of your problem, but what I did was to round and contour the ends of the splits using the little scissors of my Swiss Army knife. This greatly eliminated the nipping. They're still not my favorite shorts, but well tolerable. |
#5
|
|||
|
|||
Any Success Replacing Pads in Shorts?
Do I remember those pads being 'welded' (ie glued or melted or
whatever) onto the lycra? Or is it just sewn on? |
#6
|
|||
|
|||
Any Success Replacing Pads in Shorts?
Scott Gordo wrote:
Do I remember those pads being 'welded' (ie glued or melted or whatever) onto the lycra? Or is it just sewn on? I do have a couple pair of shorts with melted-on pads. But the ones I am talking about are sewn with some form of zig-zag stiching - very secure. |
#7
|
|||
|
|||
Any Success Replacing Pads in Shorts?
On Oct 4, 8:20*am, David White wrote:
Scott Gordo wrote: Do I remember those pads being 'welded' (ie glued or melted or whatever) onto the lycra? Or is it just sewn on? I do have a couple pair of shorts with melted-on pads. But the ones I am talking about are sewn with some form of zig-zag stiching - very secure. HAVE YOU LOCATED A SOURCE FOR GEL FOAM PADDING ? |
#8
|
|||
|
|||
Any Success Replacing Pads in Shorts?
kolldata wrote:
On Oct 4, 8:20 am, David White wrote: Scott Gordo wrote: Do I remember those pads being 'welded' (ie glued or melted or whatever) onto the lycra? Or is it just sewn on? I do have a couple pair of shorts with melted-on pads. But the ones I am talking about are sewn with some form of zig-zag stiching - very secure. HAVE YOU LOCATED A SOURCE FOR GEL FOAM PADDING ? This http://www.kucharikclothing.com/we-replace-pad-aerotech-mlp-with-gel-pad-p-573.html is the only replacement pad I have found thus far which says it has gel in it. I haven't owned any shorts with gel pads so I have no ability to comment further. Cheers! |
#9
|
|||
|
|||
Any Success Replacing Pads in Shorts?
On Oct 4, 8:55*am, David White wrote:
kolldata wrote: On Oct 4, 8:20 am, David White wrote: Scott Gordo wrote: Do I remember those pads being 'welded' (ie glued or melted or whatever) onto the lycra? Or is it just sewn on? I do have a couple pair of shorts with melted-on pads. But the ones I am talking about are sewn with some form of zig-zag stiching - very secure. HAVE YOU LOCATED A SOURCE FOR GEL FOAM PADDING ? This http://www.kucharikclothing.com/we-replace-pad-aerotech-mlp-with-gel-... is the only replacement pad I have found thus far which says it has gel in it. I haven't owned any shorts with gel pads so I have no ability to comment further. Cheers! looking for gel foam yields medical information. ?! |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Replacing Dura-Ace brake pads | MikeyOz[_36_] | Australia | 6 | April 24th 07 10:40 AM |
Gap Too Tight After Replacing Disc Pads | [email protected] | Mountain Biking | 5 | September 26th 06 01:14 AM |
replacing disk brake pads | gabrielle | Mountain Biking | 8 | June 30th 06 07:50 PM |
Trouble replacing Hayes pads | Paul King | Mountain Biking | 3 | January 2nd 06 02:49 PM |