|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Stockpiling 110mm/74mm chainrings and cranks
I recently realized that I have quite a bit invested in 7- and 8-speed
drivetrains on 7 of my 12 bikes. I have a need for a gearing range that is not provided by the latest standard crank offerings, so converting to newer cranks is not a viable option. What I need, and what most everybody needs IMO, are 110/74mm cranks, since they provide an appropriate range of chainring sizes for just about every practical use of a bicycle with standard-sized wheels. The availability of 7-speed 11-34T cassettes makes the 110/74mm standard even more attractive, as it offers both a much lower granny gear and a higher top gear than was available in years past. We can thank the burgeoning low-end bike market for prolonging the existence of the very sensible 7-speed drivetrains for the foreseeable future, though 8-speed shifters and cassettes appear to be drying up very quickly. Get those 8-speed components while you can! Virtually every hybrid and MTB made in the past 8 years or so has either 104/64mm 4-arm cranks, or 94/58mm 5-arm cranks. Road bikes, naturally, have 130/74mm triples or 130mm doubles. All of these bikes could benefit from 110mm cranks, or 110/74 triples, since 99% of them are ridden on the street in non-racing applications. Gearing on many hybrids are too low, while gearing on many road bikes are too high. The 110/74 cranks are just right. The wide chainring size range for 110mm cranks would give optimal selection of gearing for virtually every practical application. Only true racing bikes benefit from the larger 130mm and 135mm BCD cranks, and even then it only saves a few grams. I have a 62T x 110mm chainring, for instance. In years past, plenty of road bikes came equipped with 110mm cranks. Wouldn't it be nice to just have one standard, instead of five? There are many arguments in favor of the 110mm/74mm triple crankset standard, and few compelling arguments against it. I've decided to swim upstream and begin stockpiling a supply of chainrings and crankarms to support this dwindling crank standard for my fleet of bikes. Sources for 110mm cranks and rings are drying up, though perhaps not as quickly as we might have thought. Everybody thought that 9/10 speed cranks/rings/chains would dominate and that 7/8-speed stuff would dry up overnight. It hasn't quite happened that way; but still, now is a good time to stock up. I wouldn't bet on the 110/74 cranks and rings to be available forever. I think once the current overstocks are gone, that's probably the last of it for a while (until we regain our senses). -Barry |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stockpiling 110mm/74mm chainrings and cranks | Rocketman | General | 15 | November 13th 03 07:32 PM |
rotor cranks | andy | Techniques | 66 | November 5th 03 03:23 PM |
Campy triple cranks: Veloce vs. Centaur? | trent gregory hill | Techniques | 2 | October 18th 03 12:41 AM |