|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Shimano 8 speed hub & dyno hub/roller brakes - any user info welcome
Can anyone who uses these tell me if there are any problems with
Shimano 8 speed gear and roller brake hub,shimano dynamo hub and roller brake in long distance road use. Is the lowest gear low enough for a 1 in 10 hill and are the brakes adequate for a similar gradient? Are they ok for trailer towing? I am putting together a touring bike for a 'round-Austrlia'trip of about 12 months duration and the load on the bike and trailer is anticipated to be about about 150kg. Any thoughts or ideas most welcome. Thanks Nick, Australia |
Ads |
#2
|
|||
|
|||
Shimano 8 speed hub & dyno hub/roller brakes - any user info welcome
petal puss Wrote: I am putting together a touring bike for a 'round-Austrlia'trip of about 12 months duration and the load on the bike and trailer is anticipated to be about about 150kg. Any thoughts or ideas most welcome. Carry less stuff....... Pet -- Poiter |
#3
|
|||
|
|||
Shimano 8 speed hub & dyno hub/roller brakes - any user info welcome
petal puss Wrote: Can anyone who uses these tell me if there are any problems wit Shimano 8 speed gear and roller brake hub,shimano dynamo hub an roller brake in long distance road use. Is the lowest gear low enoug for a 1 in 10 hill and are the brakes adequate for a similar gradient Are they ok for trailer towing? I am putting together a touring bik for a 'round-Austrlia'trip of about 12 months duration and the load o the bike and trailer is anticipated to be about about 150kg. An thoughts or ideas most welcome Thank Nick, Australia presumably you are going the hubgear route for lower maintenance yeah? pro's and cons. weight. gear range is 'OK' but if you are hauling s much stuff you are probably gonna want smaller than bigger. Can you stretch to a Rohloff? pricey but lighter and better geared. If you can get in contact with Alan Christie or someone form th touring clubs (melbourne -MBTC - http://www.mbtc.org.au/ or simila org if is not near you -- flyingdutc |
#4
|
|||
|
|||
Shimano 8 speed hub & dyno hub/roller brakes - any user info welcome
petal puss Wrote: I am putting together a touring bike for a 'round-Austrlia'trip of about 12 months duration and the load on the bike and trailer is anticipated to be about about 150kg. Any thoughts or ideas most welcome. Thanks Nick, Australia I hope that 150kg includes your body weight..... & you're 'big boned' Slow trip otherwise. A BoB trailer handles fine with ~25kgs. I second the Rohloff ove Shimano -- Bikesoiler |
#5
|
|||
|
|||
Shimano 8 speed hub & dyno hub/roller brakes - any user infowelcome
petal puss wrote:
Can anyone who uses these tell me if there are any problems with Shimano 8 speed gear and roller brake hub,shimano dynamo hub and The 8-speed hub gear has a 307% range. About the same as a mountain bike or tourer's rear cassette. But you'll be stuck in one chainring, so only have half the overall range. Is the lowest gear low enough for a 1 in 10 hill ... 150kg. Any !!! Only if you have a ting chainring, and top speed of 25km/hr. I'd want a very low gear to haul 150kg up 10% for any length of time. thoughts or ideas most welcome. Carry less. Reconsider conventional derailer gears, unless you can afford the Rohloff. good luck |
#6
|
|||
|
|||
Shimano 8 speed hub & dyno hub/roller brakes - any user info welcome
"petal puss" wrote in message m... I am putting together a touring bike for a 'round-Austrlia'trip of about 12 months duration and the load on the bike and trailer is anticipated to be about about 150kg. Any thoughts or ideas most welcome. The standard load that most tourers carry on a long bush tour is usually around 40kg max. Friends of mine who rode the Gunbarrel Hwy from Uluru to Wiluna (not for the family tourist) took an extra 30kgs of water and had to limit other gear, but still wouldn't have exceeded 60kgs. What unusual extras are you carrying that adds up to 150kg? A portable generator? 150 kgs up 1 in 10 grades - good luck. Glad I'm not hauling it. Cheers Peter |
#7
|
|||
|
|||
Shimano 8 speed hub & dyno hub/roller brakes - any user info welcome
On Sat, 25 Sep 2004 20:08:44 -0700, petal puss wrote:
Can anyone who uses these tell me if there are any problems with Shimano 8 speed gear and roller brake hub,shimano dynamo hub and roller brake in long distance road use. Is the lowest gear low enough for a 1 in 10 hill and are the brakes adequate for a similar gradient? Are they ok for trailer towing? I am putting together a touring bike for a 'round-Austrlia'trip of about 12 months duration and the load on the bike and trailer is anticipated to be about about 150kg. Any thoughts or ideas most welcome. I'd ring Adam at Cheeky Monkey in Sydney. They build 'city-bike' bikes put together with the shimano hubs, and supposedly sell quite a few Rolholfs. There's also a Sturmey-Archer(sp?/wrong?) 8 speed hub on the market too. What sort of trailer are you talking about ? Don't forget some excellent brakes, stopping that lot down a hill in the wet is going to require something serious. I wouldn't want to rely on a hub brake only. What's a 1/10 hill as a percentage gradient anyway? (10%? I thought it was more complicated than that). We once hit the wrong direction on a 20% hill, luckily it was only short, but it took two of us to push the bike with the kids in the trailer to the top. -kt |
#8
|
|||
|
|||
Shimano 8 speed hub & dyno hub/roller brakes - any user info welcome
Thanks for all the help so far. To clarify a few points......
I am 6ft 4in and weigh 100kg and the other 50kg is for the trailer and load. I'm getting a custom frame made as I find conventional frames too small for my height. Sounds like the Shimano gear hub doesn't have a big enough range and the rohloff is the way to go. I hope to have a trailer built out of light steel with 26inch wheels and be able to slot in a large esky for a waterproof storage unit. I have seen gooseneck trailers coming off the main frame behine/below the seat, not off the rear 'axle'. They seem very manoueverable and well-balanced. Further thoughts???????????? Nick |
#9
|
|||
|
|||
Trailers, was ....e
petal puss wrote:
I hope to have a trailer built out of light steel with 26inch wheels and be able to slot in a large esky for a waterproof storage unit. I have seen gooseneck trailers coming off the main frame behine/below the seat, not off the rear 'axle'. They seem very manoueverable and well-balanced. 50Kg throwing your bicycle about at the seat post doesn't sound too controllable to me. I recently had a lot of trouble with 50kg getting a wobble up on a bob style trailer. My suggestion is a two wheel trailer with a gooseneck to near the bottom left axle, or a bob style connection to both axles/rear dropouts. Unless this is for a beer trailer, you might also like to look at galvanised tradesman tool boxes. |
#10
|
|||
|
|||
Shimano 8 speed hub & dyno hub/roller brakes - any user info welcome
petal puss Wrote: Thanks for all the help so far. To clarify a few points...... I am 6ft 4in and weigh 100kg and the other 50kg is for the trailer and load. I'm getting a custom frame made as I find conventional frames too small for my height. Sounds like the Shimano gear hub doesn't have a big enough range and the rohloff is the way to go. I hope to have a trailer built out of light steel with 26inch wheels and be able to slot in a large esky for a waterproof storage unit. I have seen gooseneck trailers coming off the main frame behine/below the seat, not off the rear 'axle'. They seem very manoueverable and well-balanced. Further thoughts???????????? Nick I don't like the idea of a high mount trailer, but I 'spose the traile bikes tow OK. They are single wheel like a BoB though. A BoB trailer is rated to 32kg & I'm sure could carry a bit more o good roads. Can you trim your load down -- Bikesoiler |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
7 Speed Shimano Wheels | Paul Cassel | Techniques | 11 | August 14th 05 02:28 AM |
Dura Ace Triple | RP10128 | Techniques | 17 | March 31st 05 04:42 AM |
Shimano 8 speed to 9 speed | Paul Nevai | Techniques | 10 | October 11th 04 06:18 AM |
9 speed shifters/cassettes upgrade for 8 speed Shimano 600 hub | FJS | Techniques | 18 | October 4th 04 05:50 AM |
FS: 8 speed Shimano 105 STI, ders, cass, chain, brakes | Rodney | Marketplace | 0 | August 25th 04 11:29 PM |