|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
What to do with naked DT shifter bosses?
The bike looks like a baby running around without a diaper at the moment.
\\paul -- Paul M. Hobson ..:change the f to ph to reply:. |
Ads |
#2
|
|||
|
|||
What to do with naked DT shifter bosses?
"Paul M. Hobson" wrote in message
... The bike looks like a baby running around without a diaper at the moment. Angle grinder! (oh no, sorry, wrong group) Put the bosses you get with a set of sti/ergo levers on, but leave the cable adjusters off? cheers, clive |
#3
|
|||
|
|||
What to do with naked DT shifter bosses?
"Paul M. Hobson" wrote in message
... The bike looks like a baby running around without a diaper at the moment. Clive George wrote: Angle grinder! (oh no, sorry, wrong group) Put the bosses you get with a set of sti/ergo levers on, but leave the cable adjusters off? Perhaps. That's all I can come up with too :/ \\paul -- Paul M. Hobson ..:change the f to ph to reply:. |
#4
|
|||
|
|||
What to do with naked DT shifter bosses?
On May 21, 9:12 pm, "Paul M. Hobson" wrote:
The bike looks like a baby running around without a diaper at the moment. \\paul Build up with Bondo to look like pectoral fins. |
#5
|
|||
|
|||
What to do with naked DT shifter bosses?
"Paul M. Hobson" wrote in message
... The bike looks like a baby running around without a diaper at the moment. How are you presently running your cables. Oh, you must be running a fixie. As someone noted, just put on the cable stops without the screw-in ends. They won't look that good but then they won't look as bad as without anything. |
#6
|
|||
|
|||
What to do with naked DT shifter bosses?
Tom Kunich wrote:
"Paul M. Hobson" wrote in message ... The bike looks like a baby running around without a diaper at the moment. How are you presently running your cables. Oh, you must be running a fixie. As someone noted, just put on the cable stops without the screw-in ends. They won't look that good but then they won't look as bad as without anything. Just to be clear, it's the ladyfriend's singlespeed. She'll probably be cool with leaving them bald. I've been recently baptized in the church of Shimagnolo and hope to gain dual citizenship in the Alfine province of the Nexus Republic. \\paul -- Paul M. Hobson ..:change the f to ph to reply:. |
#7
|
|||
|
|||
What to do with naked DT shifter bosses?
On May 21, 7:12*pm, "Paul M. Hobson" wrote:
The bike looks like a baby running around without a diaper at the moment. \\paul -- Paul M. Hobson .:change the f to ph to reply:. |
#8
|
|||
|
|||
What to do with naked DT shifter bosses?
On May 21, 7:12*pm, "Paul M. Hobson" wrote:
The bike looks like a baby running around without a diaper at the moment. Use an M5 screw to mount a good luck charm, Pez dispenser, or even a small light (on a raised mount so it shines over the fork crown). Ben |
#9
|
|||
|
|||
What to do with naked DT shifter bosses?
"Paul M. Hobson" wrote in message ... The bike looks like a baby running around without a diaper at the moment. \\paul -- Paul M. Hobson .:change the f to ph to reply:. Put some DT levers on them and use them as god intended.... ;-) Chas. |
#10
|
|||
|
|||
What to do with naked DT shifter bosses?
On May 22, 12:27 am, "Paul M. Hobson" wrote:
Tom Kunich wrote: "Paul M. Hobson" wrote in message ... The bike looks like a baby running around without a diaper at the moment. How are you presently running your cables. Oh, you must be running a fixie. As someone noted, just put on the cable stops without the screw-in ends. They won't look that good but then they won't look as bad as without anything. Just to be clear, it's the ladyfriend's singlespeed. She'll probably be cool with leaving them bald. I've been recently baptized in the church of Shimagnolo and hope to gain dual citizenship in the Alfine province of the Nexus Republic. If you're *******izing the Bianchi, which I fully approve of. Do remember that a gentleman doesn't really need more than three gears, and a S/A trigger shifter (get a vintage one with silver fascia ya hipster) can be made to fit oh-so-neatly up by the stem when using drop bars. Our SA is now fully modern looking in an aluminum shell: http://www.sturmey-archer.com/hubs_3spd_SRF3.php "Look ma, no more oil port!" Middle gear should be efficient as a red band Alfine. Cheap. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ti frame; add shifter bosses | don vescio | Techniques | 5 | December 8th 06 04:00 AM |
Mounting downtube shifters without shifter bosses | [email protected] | Techniques | 22 | July 14th 06 03:50 PM |
Mounting downtube shifters without shifter bosses | Budstaff | UK | 4 | July 14th 06 03:50 PM |
Mounting downtube shifters without shifter bosses | jtaylor | UK | 0 | July 14th 06 03:48 PM |
WTB: Cannondale Bolt on Shifter Bosses | Larry Gray | Marketplace | 0 | December 17th 05 11:30 PM |