|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Durability Of Velocity Aerohead Rims In 20/24 Hole Drillings.
"Tom Sherman °_°" wrote in message ... On 11/11/2010 10:45 PM, Michael Press wrote: In , Tom Sherman wrote: On 11/11/2010 10:30 PM, Michael Press wrote: [...] You must have read where Tom Sherman told me that my 22.5 mm wide Sun Ringle CR18 rims are "rather narrow." He refuses to answer my question if they are suitable for 25 mm and 23 mm tires. I have no interest in that question, since I have no use for such narrow tires. This would be a proper sized rim: http://www.sun-ringle.com/bmx/rims/rhyno-lite-xl/. You brought up "rather narrow", and I expect you to know what you are talking about. This is a technical forum. Tires less than 28-mm wide are too narrow, so as I said, I have no interest in rims for them. -- Tom Sherman - 42.435731,-83.985007 I am a vehicular cyclist. To the original poster, I have ridden many miles on 25 mm road tires and somewhat fewer miles on 30 mm cross tires on rims that measure about 20 mm across the braking surfaces, with no problems. At least, no problems related to tire vs. rim width. Kerry |
Ads |
#12
|
|||
|
|||
Durability Of Velocity Aerohead Rims In 20/24 Hole Drillings.
In article ,
Tom Sherman °_° wrote: On 11/11/2010 10:45 PM, Michael Press wrote: In , Tom Sherman wrote: On 11/11/2010 10:30 PM, Michael Press wrote: [...] You must have read where Tom Sherman told me that my 22.5 mm wide Sun Ringle CR18 rims are "rather narrow." He refuses to answer my question if they are suitable for 25 mm and 23 mm tires. I have no interest in that question, since I have no use for such narrow tires. This would be a proper sized rim: http://www.sun-ringle.com/bmx/rims/rhyno-lite-xl/. You brought up "rather narrow", and I expect you to know what you are talking about. This is a technical forum. Tires less than 28-mm wide are too narrow, so as I said, I have no interest in rims for them. Too narrow for what? -- Michael Press |
#13
|
|||
|
|||
Durability Of Velocity Aerohead Rims In 20/24 Hole Drillings.
In article ,
"Kerry Montgomery" wrote: "Tom Sherman °_°" wrote in message ... On 11/11/2010 10:45 PM, Michael Press wrote: In , Tom Sherman wrote: On 11/11/2010 10:30 PM, Michael Press wrote: [...] You must have read where Tom Sherman told me that my 22.5 mm wide Sun Ringle CR18 rims are "rather narrow." He refuses to answer my question if they are suitable for 25 mm and 23 mm tires. I have no interest in that question, since I have no use for such narrow tires. This would be a proper sized rim: http://www.sun-ringle.com/bmx/rims/rhyno-lite-xl/. You brought up "rather narrow", and I expect you to know what you are talking about. This is a technical forum. Tires less than 28-mm wide are too narrow, so as I said, I have no interest in rims for them. To the original poster, I have ridden many miles on 25 mm road tires and somewhat fewer miles on 30 mm cross tires on rims that measure about 20 mm across the braking surfaces, with no problems. At least, no problems related to tire vs. rim width. Kerry Thanks. I was asking Tom Sherman about the opposite fit question. Are the CR18 rims at his quoted 22.5 mm width and characterization as "rather narrrow" narrow enough to support 23 mm or 25 mm tires properly? -- Michael Press |
#14
|
|||
|
|||
Durability Of Velocity Aerohead Rims In 20/24 Hole Drillings.
On 11/12/2010 10:31 PM, Michael Press wrote:
In , Tom Sherman wrote: On 11/11/2010 10:45 PM, Michael Press wrote: In , Tom Sherman wrote: On 11/11/2010 10:30 PM, Michael Press wrote: [...] You must have read where Tom Sherman told me that my 22.5 mm wide Sun Ringle CR18 rims are "rather narrow." He refuses to answer my question if they are suitable for 25 mm and 23 mm tires. I have no interest in that question, since I have no use for such narrow tires. This would be a proper sized rim: http://www.sun-ringle.com/bmx/rims/rhyno-lite-xl/. You brought up "rather narrow", and I expect you to know what you are talking about. This is a technical forum. Tires less than 28-mm wide are too narrow, so as I said, I have no interest in rims for them. Too narrow for what? Use on sensible bicycles. -- Tom Sherman - 42.435731,-83.985007 I am a vehicular cyclist. |
#15
|
|||
|
|||
Durability Of Velocity Aerohead Rims In 20/24 Hole Drillings.
In article ,
Tom Sherman °_° wrote: On 11/12/2010 10:31 PM, Michael Press wrote: In , Tom Sherman wrote: On 11/11/2010 10:45 PM, Michael Press wrote: In , Tom Sherman °_°twshermanREMOVE@THISsouthslope .net wrote: On 11/11/2010 10:30 PM, Michael Press wrote: [...] You must have read where Tom Sherman told me that my 22.5 mm wide Sun Ringle CR18 rims are "rather narrow." He refuses to answer my question if they are suitable for 25 mm and 23 mm tires. I have no interest in that question, since I have no use for such narrow tires. This would be a proper sized rim: http://www.sun-ringle.com/bmx/rims/rhyno-lite-xl/. You brought up "rather narrow", and I expect you to know what you are talking about. This is a technical forum. Tires less than 28-mm wide are too narrow, so as I said, I have no interest in rims for them. Too narrow for what? Use on sensible bicycles. Your judgements are entirely subjective. "Rather narrow" "Sensible bicycles" "I have no user for such narrow tires" This is a technical forum. When denigrating the choices of others you are expected to give actual support. -- Michael Press |
#16
|
|||
|
|||
Durability Of Velocity Aerohead Rims In 20/24 Hole Drillings.
"Michael Press" wrote in message
... [...] Your judgements are entirely subjective. "Rather narrow" "Sensible bicycles" "I have no user for such narrow tires" This is a technical forum. When denigrating the choices of others you are expected to give actual support. You do not even know how to edit a post so that others can read it with clarity. I think "Clutter" must be your middle name. What good is technical knowledge if you lack judgment. You are a nitwit. Either come to some conclusions or get lost. Regards, Ed Dolan the Great - Minnesota aka Saint Edward the Great - Order of the Perpetual Sorrows - Minnesota |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Durability Of Velocity Aerohead Rims In 20/24 Hole Drillings. | Steve Sr. | Techniques | 583 | December 6th 10 09:47 PM |
Durability Of Velocity Aerohead Rims In 20/24 Hole Drillings. | Michael Press | General | 38 | November 12th 10 05:44 AM |
Durability Of Velocity Aerohead Rims In 20/24 Hole Drillings. | Tom Sherman °_°[_2_] | General | 4 | November 10th 10 07:04 PM |
Durability Of Velocity Aerohead Rims In 20/24 Hole Drillings. | mike[_8_] | General | 0 | November 9th 10 09:28 PM |