|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Truss instead of tube in bicycle frame?
We had so-called monocoque frames and now the industry came up with
this: http://www.isotruss.org/bike.htm Wasn't a thin-walled and butted tube lighter, stronger and stiffer than truss in such small diameters as we have in bicycle frame? -- Best regards, Rado bladteth Rzeznicki |
Ads |
#2
|
|||
|
|||
I wish I could see those pictures, but they seem to have been resized via
webbrowser, making them really pixelly... Here's the pic in the proper resolution: http://www.isotruss.org/graphics/isobike_II_large.jpg Mike http://mikebeauchamp.com "Rado bladteth Rzeznicki" wrote in message ... We had so-called monocoque frames and now the industry came up with this: http://www.isotruss.org/bike.htm Wasn't a thin-walled and butted tube lighter, stronger and stiffer than truss in such small diameters as we have in bicycle frame? -- Best regards, Rado bladteth Rzeznicki |
#3
|
|||
|
|||
I wish I could see those pictures, but they seem to have been resized via
webbrowser, making them really pixelly... Here's the pic in the proper resolution: http://www.isotruss.org/graphics/isobike_II_large.jpg Mike http://mikebeauchamp.com "Rado bladteth Rzeznicki" wrote in message ... We had so-called monocoque frames and now the industry came up with this: http://www.isotruss.org/bike.htm Wasn't a thin-walled and butted tube lighter, stronger and stiffer than truss in such small diameters as we have in bicycle frame? -- Best regards, Rado bladteth Rzeznicki |
#4
|
|||
|
|||
Rado bladteth Rzeznicki wrote:
We had so-called monocoque frames and now the industry came up with this: http://www.isotruss.org/bike.htm Wasn't a thin-walled and butted tube lighter, stronger and stiffer than truss in such small diameters as we have in bicycle frame? yes. but it's an interesting school project. |
#5
|
|||
|
|||
Rado bladteth Rzeznicki wrote:
We had so-called monocoque frames and now the industry came up with this: http://www.isotruss.org/bike.htm Wasn't a thin-walled and butted tube lighter, stronger and stiffer than truss in such small diameters as we have in bicycle frame? yes. but it's an interesting school project. |
#6
|
|||
|
|||
On 2004-10-19, Rado bladteth Rzeznicki wrote:
We had so-called monocoque frames and now the industry came up with this: http://www.isotruss.org/bike.htm Wasn't a thin-walled and butted tube lighter, stronger and stiffer than truss in such small diameters as we have in bicycle frame? Alex Moulton's been making truss frames since the 1950's... -- -John ) |
#7
|
|||
|
|||
On 2004-10-19, Rado bladteth Rzeznicki wrote:
We had so-called monocoque frames and now the industry came up with this: http://www.isotruss.org/bike.htm Wasn't a thin-walled and butted tube lighter, stronger and stiffer than truss in such small diameters as we have in bicycle frame? Alex Moulton's been making truss frames since the 1950's... -- -John ) |
#8
|
|||
|
|||
It's creative, for sure.
A drawback to this frame design is the difficulty of keeping the insides clean, especially when riding through mud. r.b. jim beam wrote in message ... Rado bladteth Rzeznicki wrote: We had so-called monocoque frames and now the industry came up with this: http://www.isotruss.org/bike.htm Wasn't a thin-walled and butted tube lighter, stronger and stiffer than truss in such small diameters as we have in bicycle frame? yes. but it's an interesting school project. |
#9
|
|||
|
|||
It's creative, for sure.
A drawback to this frame design is the difficulty of keeping the insides clean, especially when riding through mud. r.b. jim beam wrote in message ... Rado bladteth Rzeznicki wrote: We had so-called monocoque frames and now the industry came up with this: http://www.isotruss.org/bike.htm Wasn't a thin-walled and butted tube lighter, stronger and stiffer than truss in such small diameters as we have in bicycle frame? yes. but it's an interesting school project. |
#10
|
|||
|
|||
On Tue, 19 Oct 2004 20:07:26 +0000, John Thompson wrote:
Wasn't a thin-walled and butted tube lighter, stronger and stiffer than truss in such small diameters as we have in bicycle frame? Alex Moulton's been making truss frames since the 1950's... Only since 1983; the earlier Moultons (from 1962-75) were a single large tube. See http://www.moultoneers.net/ for more detailed history. Mike |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rec.Bicycles Frequently Asked Questions Posting Part 1/5 | Mike Iglesias | General | 4 | October 29th 04 07:11 AM |
Team vs Strada | mjbass | Recumbent Biking | 43 | January 5th 04 03:28 AM |
Who is going to Interbike? | Bruce Gilbert | Techniques | 2 | October 10th 03 09:26 PM |
FAQ | Just zis Guy, you know? | UK | 27 | September 5th 03 10:58 PM |