A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Techniques
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Riding



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old June 11th 21, 05:54 AM posted to rec.bicycles.tech
Lou Holtman[_5_]
external usenet poster
 
Posts: 826
Default Riding

Op vrijdag 11 juni 2021 om 00:07:17 UTC+2 schreef :
On Thursday, June 10, 2021 at 2:54:01 PM UTC-7, wrote:
On Thursday, June 10, 2021 at 10:23:48 PM UTC+2, wrote:
On Thursday, June 10, 2021 at 12:48:51 PM UTC-7, Mark cleary wrote:
On Thursday, June 10, 2021 at 10:58:48 AM UTC-5, AMuzi wrote:
On 6/10/2021 10:17 AM, jbeattie wrote:
On Thursday, June 10, 2021 at 8:08:39 AM UTC-7, wrote:
Today the wind hasn't picked up to "Oh my God" yet so I will take a ride and test out my shifting on the Eddy Merckx. The only thing I'm worried about is overshifting in the big ring and throwing the chain off.

You know, there is a limit screw on your front derailleur that prevents you from throwing the chain off. You might want to adjust that.

The chain now has three quick links in it and that isn't a good omen but we'll see.

How does that even happen? If it were a Shimano chain, at least you could use pins so you didn't have a bunch of dopey quick links.



"How does that even happen?"
'Mistakes were made'

--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971
My Habanero does not throw chains off big ring and normally if set correct this should not happen. However sometimes as mentioned J I believe, the small ring will dump the chain. It has not happened to be ever on the Habanero in 25,000 miles but my Wilier would still sometimes dump the small ring. I installed chain catcher and that ended if for good a beautiful little gadget that does not weight anything really.
If you set the front derailleur up exactly right it won't overshift the large ring. But in order to have absolutely dead quiet shifting with no dragging at all in any cog, you have to set it up exactly correct. Then if the limit screws bed in tighter, which they normally do, you have to reset the limit screws. Of course that is AFTER your ride or perhaps during it if you want to stop and reset the limit screws.

The limit screws have nothing to do with adjusting in an indexed front system. They are safety measures for knuckleheads.

What are you talking about Lou? You use Shimano don't you? Campy doesn't work that way. If you don't limit the motion of the front derailleur with the limit screws it can throw the chain all the way out to the pedal. Tell me why the **** there are limit screws if you think that somehow the chain would never come off the chain rings? ALL front derailleurs have limit screws on them and if you believe that you don't need them you are the knucklehead.


I said with an indexed system. You are right about Campy. That is a ratchet system. I use both BTW so I know what I’m talking about.

Lou
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Riding on Ice! CrazyChrisVT Unicycling 31 December 29th 08 02:40 AM
Climbing: riding on the tops vs riding on the brake hoods hizark21 Racing 20 July 29th 08 06:30 AM
Riding Rigid, Riding One Gear GeeDubb Mountain Biking 11 December 20th 06 02:49 AM
Speed averages between trail riding and road riding Brian Walker General 5 September 21st 05 12:39 AM
There's no riding like snow riding... Jonesy Mountain Biking 5 January 3rd 04 04:26 AM


All times are GMT +1. The time now is 11:03 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2004-2023 CycleBanter.com.
The comments are property of their posters.