Back from the shop and a bit twitchy

I got my unicycle back from the shop today. All clicking and loseness of
the joints is gone, but now it wobbles side to side as I ride it or roll
it along. Is this normal?


--
PopeSamXVI - Resident Hogwasher/Hornswaggler

Karol Jozef Wojtyla Forever!

I really am the president of my own fan club. www.samhunterfanclub.tk
------------------------------------------------------------------------
PopeSamXVI's Profile: http://www.unicyclist.com/profile/6661
View this thread: http://www.unicyclist.com/thread/39140

Check the bearing holders.


--
TheObieOne3226 - SWAT

'SWAT Gallery' (http://gallery.unicyclist.com/SWAT)
'SWAT webpage' (singlewheeledattackteam.1hwy.com)
'Arrow Racing' (http://www.arrowracing.com/)
'Sixsixone' (http://www.sixsixone.com)

"Obie is definately a trend setter, I got in to unicycling because of
him, and came here because of him" - KJ-52

"try not to annoy the great Obie, for he is better than us." - Murde
Mental

*disclaimer: the above message was not intended to offend anyone. if you
are offended i can take no responsibility for my actions because i don't
feel like it. also you are reading an internet newsgroup where not
everyone will share your same views and beliefs, be able to take
criticism and post/read threads at your own risk.*
------------------------------------------------------------------------
TheObieOne3226's Profile: http://www.unicyclist.com/profile/4851
View this thread: http://www.unicyclist.com/thread/39140

Well i did replace the old ones with new sealed bearings. The old ones
weren't sealed.

What am I looking for. I'm incompetent.


--
PopeSamXVI - Resident Hogwasher/Hornswaggler

Karol Jozef Wojtyla Forever!

I really am the president of my own fan club. www.samhunterfanclub.tk
------------------------------------------------------------------------
PopeSamXVI's Profile: http://www.unicyclist.com/profile/6661
View this thread: http://www.unicyclist.com/thread/39140

what kind of uni is it?


--
James_Potter - betcha can't stick it!
------------------------------------------------------------------------
James_Potter's Profile: http://www.unicyclist.com/profile/3807
View this thread: http://www.unicyclist.com/thread/39140

PopeSamXVI wrote:
*Well i did replace the old ones with new sealed bearings. The old
ones weren't sealed.

What am I looking for. I'm incompetent. *



Make sure they are clamped in tightly...


Outside of that....erm...just check every bolt for tightness.


--
TheObieOne3226 - SWAT

'SWAT Gallery' (http://gallery.unicyclist.com/SWAT)
'SWAT webpage' (singlewheeledattackteam.1hwy.com)
'Arrow Racing' (http://www.arrowracing.com/)
'Sixsixone' (http://www.sixsixone.com)

\"obie is definately a trend setter, i got in to unicycling because of
him, and came here because of him\" - kj-52

\"try not to annoy the great obie, for he is better than us.\" - murde
mental

*disclaimer: the above message was not intended to offend anyone. if you
are offended i can take no responsibility for my actions because i don't
feel like it. also you are reading an internet newsgroup where not
everyone will share your same views and beliefs, be able to take
criticism and post/read threads at your own risk.*
------------------------------------------------------------------------
TheObieOne3226's Profile: http://www.unicyclist.com/profile/4851
View this thread: http://www.unicyclist.com/thread/39140

On Sat, 26 Mar 2005 03:19:50 -0600, "PopeSamXVI" wrote:

I got my unicycle back from the shop today. All clicking and loseness of
the joints is gone, but now it wobbles side to side as I ride it or roll
it along. Is this normal?

No, not normal. Try reproducing the wobble when you're not riding or
rolling, but holding it while it stands on the ground. Then carefully
check what wobbles with respect to what. If you can't see it, you may
still be able to feel it. That should give you an idea about what it
is that is loose (or possibly broken).

Klaas Bil - Newsgroup Addict
--
people who unicycle are shyly exhibitionistic - GILD

Nothing is loose, but there is a light grinding noise coming from
somewhere. When spinning the wheel lightly it is enough to stop the
spinning when the right pedal in almost fully up.

I think it's a bearing problem, but then again I don't know anything
about bearings.


--
PopeSamXVI - Resident Hogwasher/Hornswaggler

Karol Jozef Wojtyla Forever!

I really am the president of my own fan club. www.samhunterfanclub.tk
------------------------------------------------------------------------
PopeSamXVI's Profile: http://www.unicyclist.com/profile/6661
View this thread: http://www.unicyclist.com/thread/39140

PopeSamXVI wrote:
*Nothing is loose, but there is a light grinding noise coming from
somewhere. When spinning the wheel lightly it is enough to stop the
spinning when the right pedal in almost fully up.

I think it's a bearing problem, but then again I don't know anything
about bearings. *
Maybe something is hitting the frame? I had that when I got my new super
wide hub for the coker the spokes hit the frame. Check for anything
touching thats not suposed to.


--
Tim - Amanda's the sexiest avatar

Tim 'Braun' (http://www.tim.com.mk/izdanija/1/189.jpg)

mmm sponsored by Arrow Racing good.

Amanda's my bestest friend.
------------------------------------------------------------------------
Tim's Profile: http://www.unicyclist.com/profile/4671
View this thread: http://www.unicyclist.com/thread/39140

sounds to me like you have a spacer(s) rubbing on the bearing holder(s).


wobbling side to side while pushing it, the weight from the pedals will
pull the wheel side to side. This also happens naturally while riding
because you are putting more weight on the foreward pedal.


--
onetrack - that gliding guy

member of thedan.com unicycle team

"People over here have a dangerous habit of adding quotes to signature
lines."
-Klaas Bil

------------------------------------------------------------------------
onetrack's Profile: http://www.unicyclist.com/profile/6374
View this thread: http://www.unicyclist.com/thread/39140