|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
I saw a bent
Zebee! Up here we dont see many bents. I was just out on my ride and was
coming up to a major intersection and this funny looking guy close to the ground zoomed past. I dont htink he even saw me so fast was he travelling. I quickly turned the corner and was in hot pursuit as it looked "interesting" but alas I couldnt catch him! LOL Kathy |
Ads |
#2
|
|||
|
|||
I saw a bent
In aus.bicycle on Mon, 19 Mar 2007 17:55:45 +1000
just us wrote: Zebee! Up here we dont see many bents. I was just out on my ride and was coming up to a major intersection and this funny looking guy close to the ground zoomed past. I dont htink he even saw me so fast was he travelling. I quickly turned the corner and was in hot pursuit as it looked "interesting" but alas I couldnt catch him! LOL Yay! Lots of the bents around are low racers, Bacchetta's about the only high bike manufacturer and I dunno there are many around. Probably because their light ones are more expensive than light low racers.... Zebee - lusting rather for a Bacchetta Aero 24 carbon, but it's a hell of a lot of money and I'd have to put all the commuting kit on it so why bother? |
#3
|
|||
|
|||
I saw a bent
"Zebee Johnstone" wrote in message ... In aus.bicycle on Mon, 19 Mar 2007 17:55:45 +1000 just us wrote: Zebee! Up here we dont see many bents. I was just out on my ride and was coming up to a major intersection and this funny looking guy close to the ground zoomed past. I dont htink he even saw me so fast was he travelling. I quickly turned the corner and was in hot pursuit as it looked "interesting" but alas I couldnt catch him! LOL Yay! Lots of the bents around are low racers, Bacchetta's about the only high bike manufacturer and I dunno there are many around. Probably because their light ones are more expensive than light low racers.... Zebee - lusting rather for a Bacchetta Aero 24 carbon, but it's a hell of a lot of money and I'd have to put all the commuting kit on it so why bother? Get the Cafe |
#4
|
|||
|
|||
I saw a bent
In aus.bicycle on Mon, 19 Mar 2007 19:08:25 +1100
Tex wrote: "Zebee Johnstone" wrote in message Zebee - lusting rather for a Bacchetta Aero 24 carbon, but it's a hell of a lot of money and I'd have to put all the commuting kit on it so why bother? Get the Cafe I think LWB bents look funny I'm extremely happy with the Giro 20. Heavier than your average good flat bar roadie of course, but I can cope. It's easy to ride, can get a fair bit of steam up (depending on the motor), stable, comfortable, the 20" front means it isn't that far to unclip and get the feet on the ground, the seat angle means most of the bumps are soaked up by my back into the sinfully comfortable seat. The Aero's a lot lighter and a lot faster but hey... I'm in this for the fitness, so a heavy bike's a plus eh! Zebee - who went out on two "I think I need a ride" 30 minute outings today. I have never ever ridden a bike with as much enjoyment as I have this one, and never just got on the bike because I wanted to feel good till I bought the 'bent. |
#5
|
|||
|
|||
I saw a bent
Jaywoo and I spotted a tandem 'bent in Neerim South yesterday... 'twas a beast of a machine on the back of a ute. nb: Neerim South. South of Neerim. Neerim, middle of nowhere, on the way to Mt Baw Baw -- gplama |
#6
|
|||
|
|||
I saw a bent
gplama Wrote: Jaywoo and I spotted a tandem 'bent in Neerim South yesterday... 'twas a beast of a machine on the back of a ute. nb: Neerim South. South of Neerim. Neerim, middle of nowhere, on the way to Mt Baw Baw ie: BFk nowhere? Could be Ben, he's back from o/s, or it could of been someone else. -- cfsmtb |
#7
|
|||
|
|||
I saw a bent
On Mar 19, 7:42 pm, Zebee Johnstone wrote:
In aus.bicycle on Mon, 19 Mar 2007 19:08:25 +1100 Tex wrote: "Zebee Johnstone" wrote in message Zebee - lusting rather for a Bacchetta Aero 24 carbon, but it's a hell of a lot of money and I'd have to put all the commuting kit on it so why bother? Get the Cafe I think LWB bents look funny Ahh, but the cafe isn't technically an LWB Besides, I likes LWBs....they remind me of the old Dragster I had as a kid I'm extremely happy with the Giro 20. Heavier than your average good flat bar roadie of course, but I can cope. It's easy to ride, can get a fair bit of steam up (depending on the motor), stable, comfortable, the 20" front means it isn't that far to unclip and get the feet on the ground, the seat angle means most of the bumps are soaked up by my back into the sinfully comfortable seat. Sounds like my catrike - who went out on two "I think I need a ride" 30 minute outings today. I have never ever ridden a bike with as much enjoyment as I have this one, and never just got on the bike because I wanted to feel good till I bought the 'bent. I've pretty much given up on my roadie. tried riding it to work for the first time in ages last week, and turned back after 10 minutes. Can't go back to the "old way" any more.... |
#8
|
|||
|
|||
I saw a bent
On Mar 19, 6:59 pm, Zebee Johnstone wrote:
In aus.bicycle on Mon, 19 Mar 2007 17:55:45 +1000 just us wrote: Zebee! Up here we dont see many bents. I was just out on my ride and was coming up to a major intersection and this funny looking guy close to the ground zoomed past. I dont htink he even saw me so fast was he travelling. I quickly turned the corner and was in hot pursuit as it looked "interesting" but alas I couldnt catch him! LOL Yay! Lots of the bents around are low racers, Bacchetta's about the only high bike manufacturer and I dunno there are many around. Probably because their light ones are more expensive than light low racers.... We're racing one this weekend at Wonthaggi.... 24 hours, 8 riders... 3 x 1hr ITTs per rider urgh.. Team Beserk (ie: greenspeed factory team). |
#9
|
|||
|
|||
I saw a bent
Bleve Wrote: On Mar 19, 6:59 pm, Zebee Johnstone wrote: In aus.bicycle on Mon, 19 Mar 2007 17:55:45 +1000 just us wrote: Zebee! Up here we dont see many bents. I was just out on my ride and was coming up to a major intersection and this funny looking guy close to the ground zoomed past. I dont htink he even saw me so fast was he travelling. I quickly turned the corner and was in hot pursuit as it looked "interesting" but alas I couldnt catch him! LOL Yay! Lots of the bents around are low racers, Bacchetta's about the only high bike manufacturer and I dunno there are many around. Probably because their light ones are more expensive than light low racers.... We're racing one this weekend at Wonthaggi.... 24 hours, 8 riders... 3 x 1hr ITTs per rider urgh.. Team Beserk (ie: greenspeed factory team). got any carbon fairing on it? -- warrwych |
#10
|
|||
|
|||
I saw a bent
On Mar 20, 11:46 am, warrwych warrwych.2np...@no-
mx.forums.cyclingforums.com wrote: Bleve Wrote: On Mar 19, 6:59 pm, Zebee Johnstone wrote: In aus.bicycle on Mon, 19 Mar 2007 17:55:45 +1000 just us wrote: Zebee! Up here we dont see many bents. I was just out on my ride and was coming up to a major intersection and this funny looking guy close to the ground zoomed past. I dont htink he even saw me so fast was he travelling. I quickly turned the corner and was in hot pursuit as it looked "interesting" but alas I couldnt catch him! LOL Yay! Lots of the bents around are low racers, Bacchetta's about the only high bike manufacturer and I dunno there are many around. Probably because their light ones are more expensive than light low racers.... We're racing one this weekend at Wonthaggi.... 24 hours, 8 riders... 3 x 1hr ITTs per rider urgh.. Team Beserk (ie: greenspeed factory team). got any carbon fairing on it? Not this year, corflute instead. When it's destroyed, a lot less of greenspeed's money will have been spent The thing is sub 20kg, which is nice, yes. The one we raced a couple of years ago was 32kg ... |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cruzbike - To bent or not to bent... | Zebee Johnstone | Australia | 17 | July 27th 06 09:57 AM |
Jon's bent is bent. | Jon Senior | UK | 16 | July 8th 04 10:05 AM |
Black Bent Down: Worst Experience on a Bent This Year | jim h | Recumbent Biking | 14 | November 30th 03 10:58 PM |
Bent 'bent pictures | Just zis Guy, you know? | UK | 12 | July 31st 03 11:23 AM |
Bent 'bent update | Just zis Guy, you know? | UK | 2 | July 19th 03 07:36 PM |