|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
New KH touring handle
Hi Kris, glad you found this thread. So do you think I should rather wait for your handle to come out instead of butchering my own version at high costs and possibly bad results? Or is it going to take a lot of time until it comes out? While we're at it, how about some magura mount adaptors for turning the 29" into a 26"?. Cause that's what I'm gonna have to make for my KH26 Guni setup next. Not sure how big the market would be for that, but it should be fairly easy and cheap to do. Or maybe a dedicated 26" frame... I'm sure you'll come out with some great stuff, as always -- munirocks mono for bono ------------------------------------------------------------------------ munirocks's Profile: http://www.unicyclist.com/profile/16564 View this thread: http://www.unicyclist.com/thread/74781 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
Ads |
#12
|
|||
|
|||
New KH touring handle
Butchering sounds interesting - there are a lot of cool handle ideas out there =). Hopefully some new stuff from KHU in this regard will happen around mid Spring'09. Kris -- danger_uni ------------------------------------------------------------------------ danger_uni's Profile: http://www.unicyclist.com/profile/21 View this thread: http://www.unicyclist.com/thread/74781 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#13
|
|||
|
|||
New KH touring handle
danger_uni;1154099 wrote: Butchering sounds interesting - there are a lot of cool handle ideas out there =). Hopefully some new stuff from KHU in this regard will happen around mid Spring'09. Kris Nooo!!!!!! Kris, don't make yet another silly long handlebar sticking out from the post/seat/frame. It's been done before (many many times) and all the designs have one fatal flaw. They break. Or else they are made so ridiculously heavy that the unicycle would be used as a boat anchor. Make a V-frame instead so we can use real handlebars/stems from bikes. -- GizmoDuck The Induni Unicycle Tour 2009. Unicycle Tour of India. Email me for details. www.induni.adventureunicyclist.com The Uninam Tour 2008.....Hanoi to Saigon!!! www.uninam.net The SINZ Unicycle Tour 2007....South Island, New Zealand www.sinzuni.org ------------------------------------------------------------------------ GizmoDuck's Profile: http://www.unicyclist.com/profile/794 View this thread: http://www.unicyclist.com/thread/74781 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#14
|
|||
|
|||
New KH touring handle
GizmoDuck;1154147 wrote: Nooo!!!!!! Kris, don't make yet another silly long handlebar sticking out from the post/seat/frame. It's been done before (many many times) and all the designs have one fatal flaw. They break. Or else they are made so ridiculously heavy that the unicycle would be used as a boat anchor. Make a V-frame instead so we can use real handlebars/stems from bikes. Indeed, triangulation is key to strength. But it doesn't have to be in the frame (as in a V-frame). Imagine two tubes somehow attached to the frame at different height. The bottom one meets the top one about halfway (there's your triangle). From that point onwards, the top one can break out into something double (for both hands), adjustable for height and length. I was initially thinking both tubes could emanate from the seat tube or seat post, but that won't work very well for short people on a 36" frame. So what about having the lower attachment somewhere on the fork, not on the seat tube. As a bonus, you'd have some lateral rigidity. -- Klaas Bil ------------------------------------------------------------------------ Klaas Bil's Profile: http://www.unicyclist.com/profile/3442 View this thread: http://www.unicyclist.com/thread/74781 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#15
|
|||
|
|||
New KH touring handle
Klaas Bil;1154184 wrote: Indeed, triangulation is key to strength. But it doesn't have to be in the frame (as in a V-frame). Imagine two tubes somehow attached to the frame at different height. The bottom one meets the top one about halfway (there's your triangle). From that point onwards, the top one can break out into something double (for both hands), adjustable for height and length. I was initially thinking both tubes could emanate from the seat tube or seat post, but that won't work very well for short people on a 36" frame. So what about having the lower attachment somewhere on the fork, not on the seat tube. As a bonus, you'd have some lateral rigidity. No, but the V-frame in my opinion is the most elegant solution. It will allow you to use many different (bicycle) stems and handlebars. -- GizmoDuck The Induni Unicycle Tour 2009. Unicycle Tour of India. Email me for details. www.induni.adventureunicyclist.com The Uninam Tour 2008.....Hanoi to Saigon!!! www.uninam.net The SINZ Unicycle Tour 2007....South Island, New Zealand www.sinzuni.org ------------------------------------------------------------------------ GizmoDuck's Profile: http://www.unicyclist.com/profile/794 View this thread: http://www.unicyclist.com/thread/74781 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#16
|
|||
|
|||
New KH touring handle
GizmoDuck;1154147 wrote: Nooo!!!!!! Kris, don't make yet another silly long handlebar sticking out from the post/seat/frame. It's been done before (many many times) and all the designs have one fatal flaw. They break. Or else they are made so ridiculously heavy that the unicycle would be used as a boat anchor. Make a V-frame instead so we can use real handlebars/stems from bikes. V-Frames would be cool too, of coarse. But what about all the happy N36, KH36 or Coker owners that don't want an ultra low tuck for whatever reasons, shouldn't they be able to buy a nice touring handle for their current setup? I don't think this is a question of either V-frames or touring handle anyways, so maybe sometime later on a v-frame could be mass prouced. I don't think I'd get one now anyways, since my current setup is very nice except for the lack of a touring handle. Sounds like Kris is actually working on a touring handle now, I find that very exciting! -- munirocks mono for bono ------------------------------------------------------------------------ munirocks's Profile: http://www.unicyclist.com/profile/16564 View this thread: http://www.unicyclist.com/thread/74781 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#17
|
|||
|
|||
New KH touring handle
munirocks;1154242 wrote: V-Frames would be cool too, of coarse. But what about all the happy N36, KH36 or Coker owners that don't want an ultra low tuck for whatever reasons, shouldn't they be able to buy a nice touring handle for their current setup? I don't think this is a question of either V-frames or touring handle anyways, so maybe sometime later on a v-frame could be mass prouced. I don't think I'd get one now anyways, since my current setup is very nice except for the lack of a touring handle. Sounds like Kris is actually working on a touring handle now, I find that very exciting! It's not about getting a low tuck, just a more comfortable riding position. Most unicyclists I know tend to go low as they ride longer distances or at higher speed. I've been off my unicycle all week because this has been so hard on my back without an adequately long handle. On a bike you can use a more upright stem or spacers to raise the handlebar height too. Same with a V-frame. -- GizmoDuck The Induni Unicycle Tour 2009. Unicycle Tour of India. Email me for details. www.induni.adventureunicyclist.com The Uninam Tour 2008.....Hanoi to Saigon!!! www.uninam.net The SINZ Unicycle Tour 2007....South Island, New Zealand www.sinzuni.org ------------------------------------------------------------------------ GizmoDuck's Profile: http://www.unicyclist.com/profile/794 View this thread: http://www.unicyclist.com/thread/74781 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#18
|
|||
|
|||
New KH touring handle
The setup can be extended out in front or positioned immediately in front of the saddle and can be adjusted in height; it's light and simple and seems to work well. Will post more later but probably not for a few months on this one. Kris -- danger_uni ------------------------------------------------------------------------ danger_uni's Profile: http://www.unicyclist.com/profile/21 View this thread: http://www.unicyclist.com/thread/74781 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#19
|
|||
|
|||
New KH touring handle
danger_uni;1154395 wrote: The setup can be extended out in front or positioned immediately in front of the saddle and can be adjusted in height; it's light and simple and seems to work well. Will post more later but probably not for a few months on this one. Kris That sounds great! I'm looking forward to it So I assume it will attach to the seatpost without the need of rails, right? Will it work on both 25.4mm and 27.2mm posts? Because my Nimbus has a 25.4mm one and my KHs are 27.2... Maybe shims would work fine though. I think it would be great to be able to unmount the handle without having to remove the seatpost and the brake. Don't know if that would cause stability issues though, but I think it would be great to be able to switch around between handle on or off settings. Then I would probably just keep the brake lever (+spooner) under the seat on the rail bracket. PS: Let me know if you need another beta tester -- munirocks mono for bono ------------------------------------------------------------------------ munirocks's Profile: http://www.unicyclist.com/profile/16564 View this thread: http://www.unicyclist.com/thread/74781 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#20
|
|||
|
|||
New KH touring handle
munirocks;1154242 wrote: V-Frames would be cool too, of coarse. But what about all the happy N36, KH36 or Coker owners that don't want an ultra low tuck for whatever reasons, shouldn't they be able to buy a nice touring handle for their current setup? Having ridden my V-frame since March I can attest that it in no way requires an ultra low tuck. I can ride upright with a hand on it or tuck as low as I want to. I've been wanting to post some pictures of my riding positions (for the home made handlebars thread) but I don't have any good pictures and it's been snowy and icy lately, so I haven't ridden in about a week. Maybe when the weather clears I'll get and post some pics. Tuck aside, the market for good handlebars for Coker and Nimbus riders is significant. (as far as unicycle handle bar markets go...) Ken, what's up with your thumb? Are you a thumb contortionist? Geoff -- naturequack monocycle monstrosity ------------------------------------------------------------------------ naturequack's Profile: http://www.unicyclist.com/profile/16649 View this thread: http://www.unicyclist.com/thread/74781 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Broken T7 Touring Handle | boisei | Unicycling | 1 | May 14th 08 11:31 PM |
Broken T7 Touring Handle | corbin | Unicycling | 0 | May 14th 08 04:39 PM |
Broken T7 Touring Handle | siafirede | Unicycling | 0 | May 14th 08 04:24 PM |
Broken T7 Touring Handle | kington99 | Unicycling | 0 | May 14th 08 04:13 PM |
A T 7 Touring Handle | Unitik908 | Unicycling | 4 | December 3rd 06 12:39 AM |